- Remove the `for Sized?` bound on `core::ops::FnOnce`, as it takes `self` by value and can never be implemented by an unsized type.
- Add a missing `Sized?` bound to the blanket `core::ops::FnMut` impl, as both `Fn` and `FnMut` are `for Sized?`.
One of the causes of #19501 was that the metadata on OSX was getting corrupted.
For any one particular invocation of the compiler the metadata file inside of an
rlib archive would have extra bytes appended to the end of it. These extra bytes
end up confusing rbml and have it run off the end of the array (resulting in the
out of bounds detected).
This commit prepends the length of metadata to the start of the metadata to
ensure that we always slice the precise amount that we want, and it also
un-ignores the test from #19502.
Closes#19501
Brief note: This does *not* affect anything in the prelude
Part of #19253
All this does is remove the reexporting of Result and Option from their
respective modules. More core reexports might be removed, but these ones
are the safest to remove since these enums (and their variants) are included in
the prelude.
Depends on https://github.com/rust-lang/rust/pull/19407 which is merged, but might need a new snapshot
[breaking-change]
Strings iterate to both char and &str, so it is natural it can also be extended or collected from an iterator of &str.
Apart from the trait implementations, `Extend<char>` is updated to use the iterator size hint, and the test added tests both the char and the &str versions of Extend and FromIterator.
- Support gcc-less installation on Windows. To do so in unattended mode run:`<intaller>.exe /TYPE=compact /SILENT`.
- Do not require admin privileges to install.
cc #19519
It is useful to have configurable newlines in base64 as the standard
leaves that for the implementation to decide. GNU `base64` apparently
uses LF, which meant in `uutils` we had to manually convert the CRLF to
LF. This made the program very slow for large inputs.
[breaking-change]
I'm interested in including doctests for `BTreeMap`'s `iter_mut` and `into_iter` methods in this PR as well, but I am not sure of the best way to demonstrate/test what they do for the doctests.
This means that `Fn(&A) -> (&B, &C)` is equivalent to `for<'a> Fn(&'a A)
-> (&'a B, &'a C)` similar to the lifetime elision of lower-case `fn` in
types and declarations.
Closes#18992.
Reported as a part of rust-lang/rust#19120
The logic of rust-lang/rust@74fb798a20 was
flawed because when a CI tool run the test parallely with other tasks,
they all belong to a single session family and the test may pick up
irrelevant zombie processes before they are reaped by the CI tool
depending on timing.
detect UFCS drop and allow UFCS methods to have explicit type parameters.
Work towards #18875.
Since code could previously call the methods & implement the traits
manually, this is a
[breaking-change]
Closes#19586. Closes#19375.
It is useful to have configurable newlines in base64 as the standard
leaves that for the implementation to decide. GNU `base64` apparently
uses LF, which meant in `uutils` we had to manually convert the CRLF to
LF. This made the program very slow for large inputs.
[breaking-change]
This is particularly important for deeply nested types, which generate deeply nested impls. This is a fix for #19318. It's possible we could also improve this particular case not to increment the recursion count, but it's worth being able to adjust the recursion limit anyhow.
cc @jdm
r? @pcwalton
This pull request tries to improve type safety of `serialize::json::Encoder`.
Looking at #18319, I decided to test some JSON implementations in other languages. The results are as follows:
* Encoding to JSON
| Language | 111111111111111111 | 1.0 |
| --- | --- | --- |
| JavaScript™ | "111111111111111100" | "1" |
| Python | "111111111111111111" | **"1.0"** |
| Go | "111111111111111111" | "1" |
| Haskell | "111111111111111111" | "1" |
| Rust | **"111111111111111104"** | "1" |
* Decoding from JSON
| Language | "1" | "1.0" | "1.6" |
| --- | --- | --- | --- |
| JavaScript™ | 1 (Number) | 1 (Number) | 1.6 (Number) |
| Python | 1 (int) | 1.0 (float) | 1.6 (float) |
| Go | **1 (float64)** | 1 (float64) | 1.6 (float64) |
| Go (expecting `int`) | 1 (int) | **error** | error |
| Haskell (with `:: Int`) | 1 (Int) | 1 (Int) | **2 (Int)** |
| Haskell (with `:: Double`) | 1.0 (Double) | 1.0 (Double) | 1.6 (Double) |
| Rust (with `::<int>`) | 1 (int) | 1 (Int) | **1 (Int)** |
| Rust (with `::<f64>`) | 1 (f64) | 1 (f64) | 1.6 (f64) |
* The tests on Haskell were done using the [json](http://hackage.haskell.org/package/json) package.
* The error message printed by Go was: `cannot unmarshal number 1.0 into Go value of type int`
As you see, there is no uniform behavior. Every implementation follows its own principle. So I think it is reasonable to find a desirable set of behaviors for Rust.
Firstly, every implementation except the one for JavaScript is capable of handling `i64` values. It is even practical, because [Twitter API uses an i64 number to represent a tweet ID](https://dev.twitter.com/overview/api/twitter-ids-json-and-snowflake), although it is recommended to use the string version of the ID.
Secondly, looking into the Go's behavior, implicit type conversion is not allowed in their decoder. If the user expects an integer value to follow, decoding a float value will raise an error. This behavior is desirable in Rust, because we are pleased to follow the principles of strong typing.
Thirdly, Python's JSON module forces a decimal point to be printed even if the fractional part does not exist. This eases the distinction of a float value from an integer value in JSON, because by the spec there is only one type to represent numbers, `Number`.
So, I suggest the following three breaking changes:
1. Remove float preprocessing in serialize::json::Encoder
`serialize::json::Encoder` currently uses `f64` to emit any integral type. This is possibly due to the behavior of JavaScript, which uses `f64` to represent any numeric value.
This leads to a problem that only the integers in the range of [-2^53+1, 2^53-1] can be encoded. Therefore, `i64` and `u64` cannot be used reliably in the current implementation.
[RFC 7159](http://tools.ietf.org/html/rfc7159) suggests that good interoperability can be achieved if the range is respected by implementations. However, it also says that implementations are allowed to set the range of number accepted. And it seems that the JSON encoders outside of the JavaScript world usually make use of `i64` values.
This commit removes the float preprocessing done in the `emit_*` methods. It also increases performance, because transforming `f64` into String costs more than that of an integral type.
Fixes#18319
2. Do not coerce to integer when decoding a float value
When an integral value is expected by the user but a fractional value is found, the current implementation uses `std::num::cast()` to coerce to an integer type, losing the fractional part. This behavior is not desirable because the number loses precision without notice.
This commit makes it raise `ExpectedError` when such a situation arises.
3. Always use a decimal point when emitting a float value
JSON doesn't distinguish between integer and float. They are just numbers. Also, in the current implementation, a fractional number without the fractional part is encoded without a decimal point.
Thereforce, when the value is decoded, it is first rendered as `Json`, either `I64` or `U64`. This reduces type safety, because while the original intention was to cast the value to float, it can also be casted to integer.
As a workaround of this problem, this commit makes the encoder always emit a decimal point even if it is not necessary. If the fractional part of a float number is zero, ".0" is padded to the end of the result.
The most recent snapshot was produced on OSX 10.8, but this segfaults on OSX
10.7 so we need to roll back one snapshot so we can start bootstrapping on 10.7
systems again.
cc #19643
Brief note: This does *not* affect anything in the prelude
Part of #19253
All this does is remove the reexporting of Result and Option from their
respective modules. More core reexports might be removed, but these ones
are the safest to remove since these enums (and their variants) are included in
the prelude.
[breaking-change]
One of the causes of #19501 was that the metadata on OSX was getting corrupted.
For any one particular invocation of the compiler the metadata file inside of an
rlib archive would have extra bytes appended to the end of it. These extra bytes
end up confusing rbml and have it run off the end of the array (resulting in the
out of bounds detected).
This commit prepends the length of metadata to the start of the metadata to
ensure that we always slice the precise amount that we want, and it also
un-ignores the test from #19502.
Closes#19501
This change makes the compiler no longer infer whether types (structures
and enumerations) implement the `Copy` trait (and thus are implicitly
copyable). Rather, you must implement `Copy` yourself via `impl Copy for
MyType {}`.
A new warning has been added, `missing_copy_implementations`, to warn
you if a non-generic public type has been added that could have
implemented `Copy` but didn't.
For convenience, you may *temporarily* opt out of this behavior by using
`#![feature(opt_out_copy)]`. Note though that this feature gate will never be
accepted and will be removed by the time that 1.0 is released, so you should
transition your code away from using it.
This breaks code like:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
Change this code to:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
impl Copy for Point2D {}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
This is the backwards-incompatible part of #13231.
Part of RFC #3.
[breaking-change]
(I don't understand why this works, and so I don't quite trust this yet. I'm pushing it up to see if anyone else can replicate this performance increase)
Somehow llvm is able to optimize this version of Vec::reserve into dramatically faster than the old version. In micro-benchmarks this was 2-10 times faster. It also reduce my Rust compile time from 41 minutes to 27 minutes.
Closes#19281.
The test harness will make sure that the panic message contains the
specified string. This is useful to help make `#[should_fail]` tests a
bit less brittle by decreasing the chance that the test isn't
"accidentally" passing due to a panic occurring earlier than expected.
The behavior is in some ways similar to JUnit's `expected` feature:
`@Test(expected=NullPointerException.class)`.
Without the message assertion, this test would pass even though it's not
actually reaching the intended part of the code:
```rust
#[test]
#[should_fail(message = "out of bounds")]
fn test_oob_array_access() {
let idx: uint = from_str("13o").unwrap(); // oops, this will panic
[1i32, 2, 3][idx];
}
```
