Add support for SHA256 source file hashing
Adds support for `-Z src-hash-algorithm sha256`, which became available in LLVM 11.
Using an older version of LLVM will cause an error `invalid checksum kind` if the hash algorithm is set to sha256.
r? `@eddyb`
cc #70401 `@est31`
Retagging: do not retag 'raw reborrows'
When doing `&raw const (*raw_ptr).field`, we do not want any retagging; the original provenance should be fully preserved.
Fixes https://github.com/rust-lang/miri/issues/1608
Test added by https://github.com/rust-lang/miri/pull/1614
Not sure whom to ask for review on this... `@oli-obk` can you have a look? Or maybe highfive makes a good choice.^^
add mipsel-unknown-none target
This adds a target for bare MIPS32r2, little endian, softfloat. This target can be used for PIC32 microcontrollers (or possibly for other devices that have a MIPS MCU core such as the M4K core).
Tried to find a name for the target that is in line with the naming scheme apparently used for the other MIPS targets.
r? `@jonas-schievink`
Fix ICE when a future-incompat-report has its command-line level capped
Fixes#78660
With PR https://github.com/rust-lang/rust/pull/75534 merged, we now run
more lint-related code for future-incompat-report, even when their final
level is Allow. Some lint-related code was not expecting `Level::Allow`,
and had an explicit panic.
This PR explicitly tracks the lint level set on the command line before
`--cap-lints` is applied. This is used to emit a more precise error
note (e.g. we don't say that `-W lint-name` was specified on the
command line just because a lint was capped to Warn). As a result, we
can now correctly emit a note that `-A` was used if we got
`Level::Allow` from the command line (before the cap is applied).
Document -Zinstrument-coverage
r? ``@tmandry``
FYI ``@wesleywiser``
Here is my proposed document for LLVM source-based code coverage.
I based it on the `profile.md` page, in the same directory, and on the Clang guide for LLVM source-based coverage.
Treat trailing semicolon as a statement in macro call
See #61733 (comment)
We now preserve the trailing semicolon in a macro invocation, even if
the macro expands to nothing. As a result, the following code no longer
compiles:
```rust
macro_rules! empty {
() => { }
}
fn foo() -> bool { //~ ERROR mismatched
{ true } //~ ERROR mismatched
empty!();
}
```
Previously, `{ true }` would be considered the trailing expression, even
though there's a semicolon in `empty!();`
This makes macro expansion more token-based.
foreign_modules query hash table lookups
When compiling a large monolithic crate we're seeing huge times in the `foreign_modules` query due to repeated iteration over foreign modules (in order to find a module by its id). This implements hash table lookups so that which massively reduces time spent in that query in this particular case. We'll need to see if the overhead of creating the hash table has a negative impact on performance in more normal compilation scenarios.
I'm working with `@wesleywiser` on this.
Expand `NtExpr` tokens only in key-value attributes
Implement the experiment described in https://github.com/rust-lang/rust/issues/55414#issuecomment-554005412
This PR also removes some customization points and token visiting functionality from AST visitors.
Read-only visitor no longer visits tokens, mutable visitor visits tokens only when specifically enabled, mutable token visiting is restricted to its single intended use case.
I haven't changed the representation of `MacArgs::Eq` yet, but it potentially can use a `TokenTree` or a `Token` instead of `TokenStream`.
It's hard to get rid of `Nonterminal::NtExpr` there (and e.g. replace it with `ast::Expr`) due to the dual nature of key-value attributes (the value is both an expression and a token stream, depending on context), and `Nonterminal` has all the machinery for maintaining both representations in sync.
Fixes https://github.com/rust-lang/rust/issues/55414
Fixes https://github.com/rust-lang/rust/issues/43860
See https://github.com/rust-lang/rust/issues/61733#issuecomment-716188981
We now preserve the trailing semicolon in a macro invocation, even if
the macro expands to nothing. As a result, the following code no longer
compiles:
```rust
macro_rules! empty {
() => { }
}
fn foo() -> bool { //~ ERROR mismatched
{ true } //~ ERROR mismatched
empty!();
}
```
Previously, `{ true }` would be considered the trailing expression, even
though there's a semicolon in `empty!();`
This makes macro expansion more token-based.
Transform post order walk to an iterative approach
The previous recursive approach might overflow the stack when walking a
particularly deep, list-like, graph. In particular, dominator
calculation for borrow checking does such a traversal and very long
functions might lead to a region dependency graph with in this
problematic structure.
This addresses what appears to be the cause of #78567 (`@SunHao-0` thanks for the stack trace).
Try running lldb_batchmode.py with PYTHONUNBUFFERED
When reporting fatal errors, LLVM calls abort() to exit the program. There is a chance that might interfere with Python printing stuff to stdout, as by default it relies on buffering to increase performance.
This commit tries to disable Python buffering, to hopefully get useful logs while debugging #78665.
When reporting fatal errors, LLVM calls abort() to exit the program.
There is a chance that might interfere with Python printing stuff to
stdout, as by default it relies on buffering to increase performance.
This commit tries to disable Python buffering, to hopefully get useful
logs while debugging #78665.
Rollup of 5 pull requests
Successful merges:
- #78606 (Clarify handling of final line ending in str::lines())
- #78610 (Do not remove tokens before AST json serialization)
- #78620 (Trivial fixes to bitwise operator documentation)
- #78627 (Point out that total_cmp is no strict superset of partial comparison)
- #78637 (Add fetch_update methods to AtomicBool and AtomicPtr)
Failed merges:
r? `@ghost`
Fixes#78660
With PR https://github.com/rust-lang/rust/pull/75534 merged, we now run
more lint-related code for future-incompat-report, even when their final
level is Allow. Some lint-related code was not expecting `Level::Allow`,
and had an explicit panic.
This PR explicitly tracks the lint level set on the command line before
`--cap-lints` is applied. This is used to emit a more precise error
note (e.g. we don't say that `-W lint-name` was specified on the
command line just because a lint was capped to Warn). As a result, we
can now correctly emit a note that `-A` was used if we got
`Level::Allow` from the command line (before the cap is applied).
Add fetch_update methods to AtomicBool and AtomicPtr
These methods were stabilized for the integer atomics in #71843, but the methods were not added for the non-integer atomics `AtomicBool` and `AtomicPtr`.
Point out that total_cmp is no strict superset of partial comparison
Partial comparison and total_cmp are not equal. This helps
preventing the mistake of creating float wrappers that
base their Ord impl on total_cmp and their PartialOrd impl on
the PartialOrd impl of the float type. PartialOrd and Ord
[are required to agree with each other](https://doc.rust-lang.org/std/cmp/trait.Ord.html#how-can-i-implement-ord).
Trivial fixes to bitwise operator documentation
Added fixes to documentation of `BitAnd`, `BitOr`, `BitXor` and
`BitAndAssign`, where the documentation for implementation on
`Vector<bool>` was using logical operators in place of the bitwise
operators.
r? @steveklabnik
Closes#78619
Do not remove tokens before AST json serialization
`TokenStripper` is error-prone and introduces one more use of `MutVisitor`.
It's much simpler to treat serialization as just one more place that wants lazy token stream to turn into a real token stream.
Also, no code is better than more code, in general.
r? @Aaron1011
(I also merged tests for `TokenStripper` ICEs into one.)
Clarify handling of final line ending in str::lines()
I found the description as it stands a bit confusing. I've added a bit more explanation to make it clear that a trailing line ending does not produce a final empty line.
Add option to customize the nll-facts' folder location
This PR adds a `nll-facts-dir` option to specify the location of the directory in which NLL facts are dumped into. It works the same way `dump-mir-dir` controls the location used by the `dump-mir` option.
Implement -Z relax-elf-relocations=yes|no
This lets rustc users tweak whether the linker should relax ELF relocations without recompiling a whole new target with its own libcore etc.
These methods were stabilized for the integer atomics in #71843, but the methods
were not added for the non-integer atomics `AtomicBool` and `AtomicPtr`.
Partial comparison and total_cmp are not equal. This helps
preventing the mistake of creating float wrappers that
base their Ord impl on total_cmp and their PartialOrd impl on
the PartialOrd impl of the float type. PartialOrd and Ord
are required to agree with each other.
Implement rustc side of report-future-incompat
cc https://github.com/rust-lang/rust/issues/71249
This is an alternative to `@pnkfelix's` initial implementation in https://github.com/pnkfelix/rust/commits/prototype-rustc-side-of-report-future-incompat (mainly because I started working before seeing that branch 😄 ).
My approach outputs the entire original `Diagnostic`, in a way that is compatible with incremental compilation. This is not yet integrated with compiletest, but can be used manually by passing `-Z emit-future-incompat-report` to `rustc`.
Several changes are made to support this feature:
* The `librustc_session/lint` module is moved to a new crate `librustc_lint_defs` (name bikesheddable). This allows accessing lint definitions from `librustc_errors`.
* The `Lint` struct is extended with an `Option<FutureBreakage>`. When present, it indicates that we should display a lint in the future-compat report. `FutureBreakage` contains additional information that we may want to display in the report (currently, a `date` field indicating when the crate will stop compiling).
* A new variant `rustc_error::Level::Allow` is added. This is used when constructing a diagnostic for a future-breakage lint that is marked as allowed (via `#[allow]` or `--cap-lints`). This allows us to capture any future-breakage diagnostics in one place, while still discarding them before they are passed to the `Emitter`.
* `DiagnosticId::Lint` is extended with a `has_future_breakage` field, indicating whether or not the `Lint` has future breakage information (and should therefore show up in the report).
* `Session` is given access to the `LintStore` via a new `SessionLintStore` trait (since `librustc_session` cannot directly reference `LintStore` without a cyclic dependency). We use this to turn a string `DiagnosticId::Lint` back into a `Lint`, to retrieve the `FutureBreakage` data.
Currently, `FutureBreakage.date` is always set to `None`. However, this could potentially be interpreted by Cargo in the future.
I've enabled the future-breakage report for the `ARRAY_INTO_ITER` lint, which can be used to test out this PR. The intent is to use the field to allow Cargo to determine the date of future breakage (as described in [RFC 2834](https://github.com/rust-lang/rfcs/blob/master/text/2834-cargo-report-future-incompat.md)) without needing to parse the diagnostic itself.
cc `@pnkfelix`
