rust/doc/tutorial-borrowed-ptr.md
Patrick Walton e78f2e2ac5 librustc: Make the compiler ignore purity.
For bootstrapping purposes, this commit does not remove all uses of
the keyword "pure" -- doing so would cause the compiler to no longer
bootstrap due to some syntax extensions ("deriving" in particular).
Instead, it makes the compiler ignore "pure". Post-snapshot, we can
remove "pure" from the language.

There are quite a few (~100) borrow check errors that were essentially
all the result of mutable fields or partial borrows of `@mut`. Per
discussions with Niko I think we want to allow partial borrows of
`@mut` but detect obvious footguns. We should also improve the error
message when `@mut` is erroneously reborrowed.
2013-03-18 17:21:16 -07:00

25 KiB
Raw Blame History

% Rust Borrowed Pointers Tutorial

Introduction

Borrowed pointers are one of the more flexible and powerful tools available in Rust. A borrowed pointer can point anywhere: into the managed or exchange heap, into the stack, and even into the interior of another data structure. A borrowed pointer is as flexible as a C pointer or C++ reference. However, unlike C and C++ compilers, the Rust compiler includes special static checks that ensure that programs use borrowed pointers safely. Another advantage of borrowed pointers is that they are invisible to the garbage collector, so working with borrowed pointers helps reduce the overhead of automatic memory management.

Despite their complete safety, a borrowed pointer's representation at runtime is the same as that of an ordinary pointer in a C program. They introduce zero overhead. The compiler does all safety checks at compile time.

Although borrowed pointers have rather elaborate theoretical underpinnings (region pointers), the core concepts will be familiar to anyone who has worked with C or C++. Therefore, the best way to explain how they are used—and their limitations—is probably just to work through several examples.

By example

Borrowed pointers are called borrowed because they are only valid for a limited duration. Borrowed pointers never claim any kind of ownership over the data that they point to: instead, they are used for cases where you would like to use data for a short time.

As an example, consider a simple struct type Point:

struct Point {x: float, y: float}

We can use this simple definition to allocate points in many different ways. For example, in this code, each of these three local variables contains a point, but allocated in a different place:

# struct Point {x: float, y: float}
let on_the_stack :  Point =  Point {x: 3.0, y: 4.0};
let shared_box   : @Point = @Point {x: 5.0, y: 1.0};
let unique_box   : ~Point = ~Point {x: 7.0, y: 9.0};

Suppose we wanted to write a procedure that computed the distance between any two points, no matter where they were stored. For example, we might like to compute the distance between on_the_stack and shared_box, or between shared_box and unique_box. One option is to define a function that takes two arguments of type Point—that is, it takes the points by value. But if we define it this way, calling the function will cause the points to be copied. For points, this is probably not so bad, but often copies are expensive. Worse, if the data type contains mutable fields, copying can change the semantics of your program in unexpected ways. So we'd like to define a function that takes the points by pointer. We can use borrowed pointers to do this:

# struct Point {x: float, y: float}
# fn sqrt(f: float) -> float { 0f }
fn compute_distance(p1: &Point, p2: &Point) -> float {
    let x_d = p1.x - p2.x;
    let y_d = p1.y - p2.y;
    sqrt(x_d * x_d + y_d * y_d)
}

Now we can call compute_distance() in various ways:

# struct Point {x: float, y: float}
# let on_the_stack :  Point =  Point{x: 3.0, y: 4.0};
# let shared_box   : @Point = @Point{x: 5.0, y: 1.0};
# let unique_box   : ~Point = ~Point{x: 7.0, y: 9.0};
# fn compute_distance(p1: &Point, p2: &Point) -> float { 0f }
compute_distance(&on_the_stack, shared_box);
compute_distance(shared_box, unique_box);

Here, the & operator takes the address of the variable on_the_stack; this is because on_the_stack has the type Point (that is, a struct value) and we have to take its address to get a value. We also call this borrowing the local variable on_the_stack, because we have created an alias: that is, another name for the same data.

In contrast, we can pass the boxes shared_box and unique_box to compute_distance directly. The compiler automatically converts a box like @Point or ~Point to a borrowed pointer like &Point. This is another form of borrowing: in this case, the caller lends the contents of the shared or unique box to the callee.

Whenever a caller lends data to a callee, there are some limitations on what the caller can do with the original. For example, if the contents of a variable have been lent out, you cannot send that variable to another task. In addition, the compiler will reject any code that might cause the borrowed value to be freed or overwrite its component fields with values of different types (I'll get into what kinds of actions those are shortly). This rule should make intuitive sense: you must wait for a borrower to return the value that you lent it (that is, wait for the borrowed pointer to go out of scope) before you can make full use of it again.

Other uses for the & operator

In the previous example, the value on_the_stack was defined like so:

# struct Point {x: float, y: float}
let on_the_stack: Point = Point {x: 3.0, y: 4.0};

This declaration means that code can only pass Point by value to other functions. As a consequence, we had to explicitly take the address of on_the_stack to get a borrowed pointer. Sometimes however it is more convenient to move the & operator into the definition of on_the_stack:

# struct Point {x: float, y: float}
let on_the_stack2: &Point = &Point {x: 3.0, y: 4.0};

Applying & to an rvalue (non-assignable location) is just a convenient shorthand for creating a temporary and taking its address. A more verbose way to write the same code is:

# struct Point {x: float, y: float}
let tmp = Point {x: 3.0, y: 4.0};
let on_the_stack2 : &Point = &tmp;

Taking the address of fields

As in C, the & operator is not limited to taking the address of local variables. It can also take the address of fields or individual array elements. For example, consider this type definition for rectangle:

struct Point {x: float, y: float} // as before
struct Size {w: float, h: float} // as before
struct Rectangle {origin: Point, size: Size}

Now, as before, we can define rectangles in a few different ways:

# struct Point {x: float, y: float}
# struct Size {w: float, h: float} // as before
# struct Rectangle {origin: Point, size: Size}
let rect_stack   = &Rectangle {origin: Point {x: 1f, y: 2f},
                               size: Size {w: 3f, h: 4f}};
let rect_managed = @Rectangle {origin: Point {x: 3f, y: 4f},
                               size: Size {w: 3f, h: 4f}};
let rect_unique  = ~Rectangle {origin: Point {x: 5f, y: 6f},
                               size: Size {w: 3f, h: 4f}};

In each case, we can extract out individual subcomponents with the & operator. For example, I could write:

# struct Point {x: float, y: float} // as before
# struct Size {w: float, h: float} // as before
# struct Rectangle {origin: Point, size: Size}
# let rect_stack  = &Rectangle {origin: Point {x: 1f, y: 2f}, size: Size {w: 3f, h: 4f}};
# let rect_managed = @Rectangle {origin: Point {x: 3f, y: 4f}, size: Size {w: 3f, h: 4f}};
# let rect_unique = ~Rectangle {origin: Point {x: 5f, y: 6f}, size: Size {w: 3f, h: 4f}};
# fn compute_distance(p1: &Point, p2: &Point) -> float { 0f }
compute_distance(&rect_stack.origin, &rect_managed.origin);

which would borrow the field origin from the rectangle on the stack as well as from the managed box, and then compute the distance between them.

Borrowing managed boxes and rooting

Weve seen a few examples so far of borrowing heap boxes, both managed and unique. Up till this point, weve glossed over issues of safety. As stated in the introduction, at runtime a borrowed pointer is simply a pointer, nothing more. Therefore, avoiding C's problems with dangling pointers requires a compile-time safety check.

The basis for the check is the notion of lifetimes. A lifetime is a static approximation of the span of execution during which the pointer is valid: it always corresponds to some expression or block within the program. Code inside that expression can use the pointer without restrictions. But if the pointer escapes from that expression (for example, if the expression contains an assignment expression that assigns the pointer to a mutable field of a data structure with a broader scope than the pointer itself), the compiler reports an error. We'll be discussing lifetimes more in the examples to come, and a more thorough introduction is also available.

When the & operator creates a borrowed pointer, the compiler must ensure that the pointer remains valid for its entire lifetime. Sometimes this is relatively easy, such as when taking the address of a local variable or a field that is stored on the stack:

struct X { f: int }
fn example1() {
    let mut x = X { f: 3 };
    let y = &mut x.f;  // -+ L
    ...                //  |
}                      // -+

Here, the lifetime of the borrowed pointer y is simply L, the remainder of the function body. The compiler need not do any other work to prove that code will not free x.f. This is true even if the code mutates x.

The situation gets more complex when borrowing data inside heap boxes:

# struct X { f: int }
fn example2() {
    let mut x = @X { f: 3 };
    let y = &x.f;      // -+ L
    ...                //  |
}                      // -+

In this example, the value x is a heap box, and y is therefore a pointer into that heap box. Again the lifetime of y is L, the remainder of the function body. But there is a crucial difference: suppose x were to be reassigned during the lifetime L? If the compiler isn't careful, the managed box could become unrooted, and would therefore be subject to garbage collection. A heap box that is unrooted is one such that no pointer values in the heap point to it. It would violate memory safety for the box that was originally assigned to x to be garbage-collected, since a non-heap pointer---y---still points into it.

Note: Our current implementation implements the garbage collector using reference counting and cycle detection.

For this reason, whenever an & expression borrows the interior of a managed box stored in a mutable location, the compiler inserts a temporary that ensures that the managed box remains live for the entire lifetime. So, the above example would be compiled as if it were written

# struct X { f: int }
fn example2() {
    let mut x = @X {f: 3};
    let x1 = x;
    let y = &x1.f;     // -+ L
    ...                //  |
}                      // -+

Now if x is reassigned, the pointer y will still remain valid. This process is called rooting.

Borrowing unique boxes

The previous example demonstrated rooting, the process by which the compiler ensures that managed boxes remain live for the duration of a borrow. Unfortunately, rooting does not work for borrows of unique boxes, because it is not possible to have two references to a unique box.

For unique boxes, therefore, the compiler will only allow a borrow if the compiler can guarantee that the unique box will not be reassigned or moved for the lifetime of the pointer. This does not necessarily mean that the unique box is stored in immutable memory. For example, the following function is legal:

# fn some_condition() -> bool { true }
# struct Foo { f: int }
fn example3() -> int {
    let mut x = ~Foo {f: 3};
    if some_condition() {
        let y = &x.f;      // -+ L
        return *y;         //  |
    }                      // -+
    x = ~Foo {f: 4};
    ...
# return 0;
}

Here, as before, the interior of the variable x is being borrowed and x is declared as mutable. However, the compiler can prove that x is not assigned anywhere in the lifetime L of the variable y. Therefore, it accepts the function, even though x is mutable and in fact is mutated later in the function.

It may not be clear why we are so concerned about mutating a borrowed variable. The reason is that the runtime system frees any unique box as soon as its owning reference changes or goes out of scope. Therefore, a program like this is illegal (and would be rejected by the compiler):

fn example3() -> int {
    let mut x = ~X {f: 3};
    let y = &x.f;
    x = ~X {f: 4};  // Error reported here.
    *y
}

To make this clearer, consider this diagram showing the state of memory immediately before the re-assignment of x:

    Stack               Exchange Heap

  x +----------+
    | ~{f:int} | ----+
  y +----------+     |
    | &int     | ----+
    +----------+     |    +---------+
                     +--> |  f: 3   |
                          +---------+

Once the reassignment occurs, the memory will look like this:

    Stack               Exchange Heap

  x +----------+          +---------+
    | ~{f:int} | -------> |  f: 4   |
  y +----------+          +---------+
    | &int     | ----+
    +----------+     |    +---------+
                     +--> | (freed) |
                          +---------+

Here you can see that the variable y still points at the old box, which has been freed.

In fact, the compiler can apply the same kind of reasoning to any memory that is (uniquely) owned by the stack frame. So we could modify the previous example to introduce additional unique pointers and structs, and the compiler will still be able to detect possible mutations:

fn example3() -> int {
    struct R { g: int }
    struct S { f: ~R }

    let mut x = ~S {f: ~R {g: 3}};
    let y = &x.f.g;
    x = ~S {f: ~R {g: 4}};  // Error reported here.
    x.f = ~R {g: 5};        // Error reported here.
    *y
}

In this case, two errors are reported, one when the variable x is modified and another when x.f is modified. Either modification would invalidate the pointer y.

Borrowing and enums

The previous example showed that the type system forbids any borrowing of unique boxes found in aliasable, mutable memory. This restriction prevents pointers from pointing into freed memory. There is one other case where the compiler must be very careful to ensure that pointers remain valid: pointers into the interior of an enum.

As an example, lets look at the following shape type that can represent both rectangles and circles:

struct Point {x: float, y: float}; // as before
struct Size {w: float, h: float}; // as before
enum Shape {
    Circle(Point, float),   // origin, radius
    Rectangle(Point, Size)  // upper-left, dimensions
}

Now we might write a function to compute the area of a shape. This function takes a borrowed pointer to a shape, to avoid the need for copying.

# struct Point {x: float, y: float}; // as before
# struct Size {w: float, h: float}; // as before
# enum Shape {
#     Circle(Point, float),   // origin, radius
#     Rectangle(Point, Size)  // upper-left, dimensions
# }
# const tau: float = 6.28f;
fn compute_area(shape: &Shape) -> float {
    match *shape {
        Circle(_, radius) => 0.5 * tau * radius * radius,
        Rectangle(_, ref size) => size.w * size.h
    }
}

The first case matches against circles. Here, the pattern extracts the radius from the shape variant and the action uses it to compute the area of the circle. (Like any up-to-date engineer, we use the tau circle constant and not that dreadfully outdated notion of pi).

The second match is more interesting. Here we match against a rectangle and extract its size: but rather than copy the size struct, we use a by-reference binding to create a pointer to it. In other words, a pattern binding like ref size binds the name size to a pointer of type &size into the interior of the enum.

To make this more clear, let's look at a diagram of memory layout in the case where shape points at a rectangle:

Stack             Memory

+-------+         +---------------+
| shape | ------> | rectangle(    |
+-------+         |   {x: float,  |
| size  | -+      |    y: float}, |
+-------+  +----> |   {w: float,  |
                  |    h: float}) |
                  +---------------+

Here you can see that rectangular shapes are composed of five words of memory. The first is a tag indicating which variant this enum is (rectangle, in this case). The next two words are the x and y fields for the point and the remaining two are the w and h fields for the size. The binding size is then a pointer into the inside of the shape.

Perhaps you can see where the danger lies: if the shape were somehow to be reassigned, perhaps to a circle, then although the memory used to store that shape value would still be valid, it would have a different type! The following diagram shows what memory would look like if code overwrote shape with a circle:

Stack             Memory

+-------+         +---------------+
| shape | ------> | circle(       |
+-------+         |   {x: float,  |
| size  | -+      |    y: float}, |
+-------+  +----> |   float)      |
                  |               |
                  +---------------+

As you can see, the size pointer would be pointing at a float instead of a struct. This is not good: dereferencing the second field of a float as if it were a struct with two fields would be a memory safety violation.

So, in fact, for every ref binding, the compiler will impose the same rules as the ones we saw for borrowing the interior of a unique box: it must be able to guarantee that the enum will not be overwritten for the duration of the borrow. In fact, the compiler would accept the example we gave earlier. The example is safe because the shape pointer has type &Shape, which means "borrowed pointer to immutable memory containing a shape". If, however, the type of that pointer were &const Shape or &mut Shape, then the ref binding would be ill-typed. Just as with unique boxes, the compiler will permit ref bindings into data owned by the stack frame even if the data are mutable, but otherwise it requires that the data reside in immutable memory.

Returning borrowed pointers

So far, all of the examples we've looked at use borrowed pointers in a “downward” direction. That is, a method or code block creates a borrowed pointer, then uses it within the same scope. It is also possible to return borrowed pointers as the result of a function, but as we'll see, doing so requires some explicit annotation.

For example, we could write a subroutine like this:

struct Point {x: float, y: float}
fn get_x(p: &'r Point) -> &'r float { &p.x }

Here, the function get_x() returns a pointer into the structure it was given. The type of the parameter (&'r Point) and return type (&'r float) both use a new syntactic form that we have not seen so far. Here the identifier r names the lifetime of the pointer explicitly. So in effect, this function declares that it takes a pointer with lifetime r and returns a pointer with that same lifetime.

In general, it is only possible to return borrowed pointers if they are derived from a parameter to the procedure. In that case, the pointer result will always have the same lifetime as one of the parameters; named lifetimes indicate which parameter that is.

In the previous examples, function parameter types did not include a lifetime name. In those examples, the compiler simply creates a fresh name for the lifetime automatically: that is, the lifetime name is guaranteed to refer to a distinct lifetime from the lifetimes of all other parameters.

Named lifetimes that appear in function signatures are conceptually the same as the other lifetimes we've seen before, but they are a bit abstract: they dont refer to a specific expression within get_x(), but rather to some expression within the caller of get_x(). The lifetime r is actually a kind of lifetime parameter: it is defined by the caller to get_x(), just as the value for the parameter p is defined by that caller.

In any case, whatever the lifetime of r is, the pointer produced by &p.x always has the same lifetime as p itself: a pointer to a field of a struct is valid as long as the struct is valid. Therefore, the compiler accepts the function get_x().

To emphasize this point, lets look at a variation on the example, this time one that does not compile:

struct Point {x: float, y: float}
fn get_x_sh(p: @Point) -> &float {
    &p.x // Error reported here
}

Here, the function get_x_sh() takes a managed box as input and returns a borrowed pointer. As before, the lifetime of the borrowed pointer that will be returned is a parameter (specified by the caller). That means that get_x_sh() promises to return a borrowed pointer that is valid for as long as the caller would like: this is subtly different from the first example, which promised to return a pointer that was valid for as long as its pointer argument was valid.

Within get_x_sh(), we see the expression &p.x which takes the address of a field of a managed box. The presence of this expression implies that the compiler must guarantee that, so long as the resulting pointer is valid, the managed box will not be reclaimed by the garbage collector. But recall that get_x_sh() also promised to return a pointer that was valid for as long as the caller wanted it to be. Clearly, get_x_sh() is not in a position to make both of these guarantees; in fact, it cannot guarantee that the pointer will remain valid at all once it returns, as the parameter p may or may not be live in the caller. Therefore, the compiler will report an error here.

In general, if you borrow a managed (or unique) box to create a borrowed pointer, the pointer will only be valid within the function and cannot be returned. This is why the typical way to return borrowed pointers is to take borrowed pointers as input (the only other case in which it can be legal to return a borrowed pointer is if the pointer points at a static constant).

Named lifetimes

Let's look at named lifetimes in more detail. Named lifetimes allow for grouping of parameters by lifetime. For example, consider this function:

# struct Point {x: float, y: float}; // as before
# struct Size {w: float, h: float}; // as before
# enum Shape {
#     Circle(Point, float),   // origin, radius
#     Rectangle(Point, Size)  // upper-left, dimensions
# }
# fn compute_area(shape: &Shape) -> float { 0f }
fn select<T>(shape: &'r Shape, threshold: float,
             a: &'r T, b: &'r T) -> &'r T {
    if compute_area(shape) > threshold {a} else {b}
}

This function takes three borrowed pointers and assigns each the same lifetime r. In practice, this means that, in the caller, the lifetime r will be the intersection of the lifetime of the three region parameters. This may be overly conservative, as in this example:

# struct Point {x: float, y: float}; // as before
# struct Size {w: float, h: float}; // as before
# enum Shape {
#     Circle(Point, float),   // origin, radius
#     Rectangle(Point, Size)  // upper-left, dimensions
# }
# fn compute_area(shape: &Shape) -> float { 0f }
# fn select<T>(shape: &Shape, threshold: float,
#              a: &'r T, b: &'r T) -> &'r T {
#     if compute_area(shape) > threshold {a} else {b}
# }
                                                     // -+ r
fn select_based_on_unit_circle<T>(                   //  |-+ B
    threshold: float, a: &'r T, b: &'r T) -> &'r T { //  | |
                                                     //  | |
    let shape = Circle(Point {x: 0., y: 0.}, 1.);    //  | |
    select(&shape, threshold, a, b)                  //  | |
}                                                    //  |-+
                                                     // -+

In this call to select(), the lifetime of the first parameter shape is B, the function body. Both of the second two parameters a and b share the same lifetime, r, which is a lifetime parameter of select_based_on_unit_circle(). The caller will infer the intersection of these two lifetimes as the lifetime of the returned value, and hence the return value of select() will be assigned a lifetime of B. This will in turn lead to a compilation error, because select_based_on_unit_circle() is supposed to return a value with the lifetime r.

To address this, we can modify the definition of select() to distinguish the lifetime of the first parameter from the lifetime of the latter two. After all, the first parameter is not being returned. Here is how the new select() might look:

# struct Point {x: float, y: float}; // as before
# struct Size {w: float, h: float}; // as before
# enum Shape {
#     Circle(Point, float),   // origin, radius
#     Rectangle(Point, Size)  // upper-left, dimensions
# }
# fn compute_area(shape: &Shape) -> float { 0f }
fn select<T>(shape: &'tmp Shape, threshold: float,
             a: &'r T, b: &'r T) -> &'r T {
    if compute_area(shape) > threshold {a} else {b}
}

Here you can see that shape's lifetime is now named tmp. The parameters a, b, and the return value all have the lifetime r. However, since the lifetime tmp is not returned, it would be more concise to just omit the named lifetime for shape altogether:

# struct Point {x: float, y: float}; // as before
# struct Size {w: float, h: float}; // as before
# enum Shape {
#     Circle(Point, float),   // origin, radius
#     Rectangle(Point, Size)  // upper-left, dimensions
# }
# fn compute_area(shape: &Shape) -> float { 0f }
fn select<T>(shape: &Shape, threshold: float,
             a: &'r T, b: &'r T) -> &'r T {
    if compute_area(shape) > threshold {a} else {b}
}

This is equivalent to the previous definition.

Conclusion

So there you have it: a (relatively) brief tour of the borrowed pointer system. For more details, we refer to the (yet to be written) reference document on borrowed pointers, which will explain the full notation and give more examples.