Recover from `Foo(a: 1, b: 2)`
Detect likely `struct` literal using parentheses as delimiters and emit
targeted suggestion instead of type ascription parse error.
Fix#61326.
Revert anon union parsing
Revert PR #84571 and #85515, which implemented anonymous union parsing in a manner that broke the context-sensitivity for the `union` keyword and thus broke stable Rust code.
Fix#88583.
Accept `m!{ .. }.method()` and `m!{ .. }?` statements.
This PR fixes something that I keep running into when using `quote!{}.into()` in a proc macro to convert the `proc_macro2::TokenStream` to a `proc_macro::TokenStream`:
Before:
```
error: expected expression, found `.`
--> src/lib.rs:6:6
|
4 | quote! {
5 | ...
6 | }.into()
| ^ expected expression
```
After:
```
```
(No output, compiles fine.)
---
Context:
For expressions like `{ 1 }` and `if true { 1 } else { 2 }`, we accept them as full statements without a trailing `;`, which means the following is not accepted:
```rust
{ 1 } - 1 // error
```
since that is parsed as two statements: `{ 1 }` and `-1`. Syntactically correct, but the type of `{ 1 }` should be `()` as there is no `;`.
However, for specifically `.` and `?` after the `}`, we do [continue parsing it as an expression](13db8440bb/compiler/rustc_parse/src/parser/expr.rs (L864-L876)):
```rust
{ "abc" }.len(); // ok
```
For braced macro invocations, we do not do this:
```rust
vec![1, 2, 3].len(); // ok
vec!{1, 2, 3}.len(); // error
```
(It parses `vec!{1, 2, 3}` as a full statement, and then complains about `.len()` not being a valid expression.)
This PR changes this to also look for a `.` and `?` after a braced macro invocation. We can be sure the macro is an expression and not a full statement in those cases, since no statement can start with a `.` or `?`.
Use smaller spans for some structured suggestions
Use more accurate suggestion spans for
* argument parse error
* fully qualified path
* missing code block type
* numeric casts
Encode spans relative to the enclosing item
The aim of this PR is to avoid recomputing queries when code is moved without modification.
MCP at https://github.com/rust-lang/compiler-team/issues/443
This is achieved by :
1. storing the HIR owner LocalDefId information inside the span;
2. encoding and decoding spans relative to the enclosing item in the incremental on-disk cache;
3. marking a dependency to the `source_span(LocalDefId)` query when we translate a span from the short (`Span`) representation to its explicit (`SpanData`) representation.
Since all client code uses `Span`, step 3 ensures that all manipulations
of span byte positions actually create the dependency edge between
the caller and the `source_span(LocalDefId)`.
This query return the actual absolute span of the parent item.
As a consequence, any source code motion that changes the absolute byte position of a node will either:
- modify the distance to the parent's beginning, so change the relative span's hash;
- dirty `source_span`, and trigger the incremental recomputation of all code that
depends on the span's absolute byte position.
With this scheme, I believe the dependency tracking to be accurate.
For the moment, the spans are marked during lowering.
I'd rather do this during def-collection,
but the AST MutVisitor is not practical enough just yet.
The only difference is that we attach macro-expanded spans
to their expansion point instead of the macro itself.
Change more x64 size checks to not apply to x32.
Commit 95e096d6 changed a bunch of size checks already, but more have
been added, so this fixes the new ones the same way: the various size
checks that are conditional on target_arch = "x86_64" were not intended
to apply to x86_64-unknown-linux-gnux32, so add
target_pointer_width = "64" to the conditions.
This commit focuses on emitting clean errors for the following syntax
error:
```
Some(42).map(|a|
dbg!(a);
a
);
```
Previous implementation tried to recover after parsing the closure body
(the `dbg` expression) by replacing the next `;` with a `,`, which made
the next expression belong to the next function argument. As such, the
following errors were emitted (among others):
- the semicolon token was not expected,
- a is not in scope,
- Option::map is supposed to take one argument, not two.
This commit allows us to gracefully handle this situation by adding
giving the parser the ability to remember when it has just parsed a
closure body inside a function call. When this happens, we can treat the
unexpected `;` specifically and try to parse as much statements as
possible in order to eat the whole block. When we can't parse statements
anymore, we generate a clean error indicating that the braces are
missing, and return an ExprKind::Err.
This reverts commit 059b68dd67.
Note that this was manually adjusted to retain some of the refactoring
introduced by commit 059b68dd67, so that it could
likewise retain the correction introduced in commit
5b4bc05fa5
Improve diagnostics for unary plus operators (#88276)
This pull request improves the diagnostics emitted on parsing a unary plus operator. See #88276.
Before:
```
error: expected expression, found `+`
--> src/main.rs:2:13
|
2 | let x = +1;
| ^ expected expression
```
After:
```
error: leading `+` is not supported
--> main.rs:2:13
|
2 | let x = +1;
| ^
| |
| unexpected `+`
| help: try removing the `+`
```
Commit 95e096d6 changed a bunch of size checks already, but more have
been added, so this fixes the new ones the same way: the various size
checks that are conditional on target_arch = "x86_64" were not intended
to apply to x86_64-unknown-linux-gnux32, so add
target_pointer_width = "64" to the conditions.
Detect bare blocks with type ascription that were meant to be a `struct` literal
Address part of #34255.
Potential improvement: silence the other knock down errors in `issue-34255-1.rs`.
Point at unclosed delimiters as part of the primary MultiSpan
Both the place where the parser encounters a needed closed delimiter and
the unclosed opening delimiter are important, so they should get the
same level of highlighting in the output.
_Context: https://twitter.com/mwk4/status/1430631546432675840_
Path remapping: Make behavior of diagnostics output dependent on presence of --remap-path-prefix.
This PR fixes a regression (#87745) with `--remap-path-prefix` where the flag stopped causing diagnostic messages to be remapped as well. The regression was introduced in https://github.com/rust-lang/rust/pull/83813 where we erroneously assumed that remapping of diagnostic messages was not desired anymore (because #70642 partially undid that functionality with nobody objecting).
The issue is fixed by making `--remap-path-prefix` remap diagnostic messages again, including for paths that have been remapped in upstream crates (e.g. the standard library). This means that "sysroot-localization" (implemented in #70642) is also disabled if `rustc` is invoked with `--remap-path-prefix`. The assumption is that once someone starts explicitly remapping paths they also don't want paths to their local Rust installation in their build output.
In the future we might want to give more fine-grained control over this behavior via compiler flags (see https://github.com/rust-lang/rfcs/pull/3127 for a related RFC). For now this PR is intended as a regression fix.
This PR is an alternative to https://github.com/rust-lang/rust/pull/88191, which makes diagnostic messages be remapped unconditionally. That approach, however, would effectively revert #70642.
Fixes https://github.com/rust-lang/rust/issues/87745.
cc `@cbeuw`
r? `@ghost`
Introduce `let...else`
Tracking issue: #87335
The trickiest part for me was enforcing the diverging else block with clear diagnostics. Perhaps the obvious solution is to expand to `let _: ! = ..`, but I decided against this because, when a "mismatched type" error is found in typeck, there is no way to trace where in the HIR the expected type originated, AFAICT. In order to pass down this information, I believe we should introduce `Expectation::LetElseNever(HirId)` or maybe add `HirId` to `Expectation::HasType`, but I left that as a future enhancement. For now, I simply assert that the block is `!` with a custom `ObligationCauseCode`, and I think this is clear enough, at least to start. The downside here is that the error points at the entire block rather than the specific expression with the wrong type. I left a todo to this effect.
Overall, I believe this PR is feature-complete with regard to the RFC.
Old error output:
3 | let _: usize = $f;
| ----- ^ expected `usize`, found struct `Baz`
| |
| expected due to this
New error output:
3 | let _: usize = $f;
| ----- ^^ expected `usize`, found struct `Baz`
| |
| expected due to this
Old error output:
= note: this warning originates in the macro `foo` (in Nightly builds, run with -Z macro-backtrace for more info)
help: wrap this expression in parentheses
|
4 | break '_l $f(;)
| ^ ^
New error output:
= note: this warning originates in the macro `foo` (in Nightly builds, run with -Z macro-backtrace for more info)
help: wrap this expression in parentheses
|
4 | break '_l ($f);
| ^ ^
Both the place where the parser encounters a needed closed delimiter and
the unclosed opening delimiter are important, so they should get the
same level of highlighting in the output.
- [x] Removed `?const` and change uses of `?const`
- [x] Added `~const` to the AST. It is gated behind const_trait_impl.
- [x] Validate `~const` in ast_validation.
- [ ] Add enum `BoundConstness` to the HIR. (With variants `NotConst` and
`ConstIfConst` allowing future extensions)
- [ ] Adjust trait selection and pre-existing code to use `BoundConstness`.
- [ ] Optional steps (*for this PR, obviously*)
- [ ] Fix#88155
- [ ] Do something with constness bounds in chalk
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
