remove allow(incomplete_features) from std
cc https://github.com/rust-lang/rust/pull/80349#issuecomment-753357123
> Now I am somewhat concerned that the standard library uses some of these features...
I think it is theoretically ok to use incomplete features in the standard library or the compiler if we know that there is an already working subset and we explicitly document what we have to be careful about. Though at that point it is probably better to try and split the incomplete feature into two separate ones, similar to `min_specialization`.
Will be interesting once `feature(const_evaluatable_checked)` works well enough to imo be used in the compiler but not yet well enough to be removed from `INCOMPLETE_FEATURES`.
r? `@RalfJung`
Add docs note about `Any::type_id` on smart pointers
Fixes#79868.
There's an issue I've run into a couple times while using values of type `Box<dyn Any>` - essentially, calling `value.type_id()` doesn't dereference to the trait object, but uses the implementation of `Any` for `Box<dyn Any>`, giving us the `TypeId` of the container instead of the object inside it.
I couldn't find any notes about this in the documentation and - while it could be inferred from existing knowledge of Rust and the blanket implemenation of `Any` - I think it'd be nice to have a note about it in the documentation for the `any` module.
Anyways, here's a first draft of a section about it. I'm happy to revise wording :)
The return of the GroupBy and GroupByMut iterators on slice
According to https://github.com/rust-lang/rfcs/pull/2477#issuecomment-742034372, I am opening this PR again, this time I implemented it in safe Rust only, it is therefore much easier to read and is completely safe.
This PR proposes to add two new methods to the slice, the `group_by` and `group_by_mut`. These two methods provide a way to iterate over non-overlapping sub-slices of a base slice that are separated by the predicate given by the user (e.g. `Partial::eq`, `|a, b| a.abs() < b.abs()`).
```rust
let slice = &[1, 1, 1, 3, 3, 2, 2, 2];
let mut iter = slice.group_by(|a, b| a == b);
assert_eq!(iter.next(), Some(&[1, 1, 1][..]));
assert_eq!(iter.next(), Some(&[3, 3][..]));
assert_eq!(iter.next(), Some(&[2, 2, 2][..]));
assert_eq!(iter.next(), None);
```
[An RFC](https://github.com/rust-lang/rfcs/pull/2477) was open 2 years ago but wasn't necessary.
Remove all doc_comment!{} hacks by using #[doc = expr] where needed.
This replaces about 200 cases of
`````rust
doc_comment! {
concat!("The smallest value that can be represented by this integer type.
# Examples
Basic usage:
```
", $Feature, "assert_eq!(", stringify!($SelfT), "::MIN, ", stringify!($Min), ");",
$EndFeature, "
```"),
#[stable(feature = "assoc_int_consts", since = "1.43.0")]
pub const MIN: Self = !0 ^ ((!0 as $UnsignedT) >> 1) as Self;
}
`````
by
```rust
/// The smallest value that can be represented by this integer type.
///
/// # Examples
///
/// Basic usage:
///
/// ```
#[doc = concat!("assert_eq!(", stringify!($SelfT), "::MIN, ", stringify!($Min), ");")]
/// ```
#[stable(feature = "assoc_int_consts", since = "1.43.0")]
pub const MIN: Self = !0 ^ ((!0 as $UnsignedT) >> 1) as Self;
```
---
**Note:** For a usable diff, make sure to enable 'ignore whitspace': https://github.com/rust-lang/rust/pull/79150/files?diff=unified&w=1
Rollup of 9 pull requests
Successful merges:
- #78934 (refactor: removing library/alloc/src/vec/mod.rs ignore-tidy-filelength)
- #79479 (Add `Iterator::intersperse`)
- #80128 (Edit rustc_ast::ast::FieldPat docs)
- #80424 (Don't give an error when creating a file for the first time)
- #80458 (Some Promotion Refactoring)
- #80488 (Do not create dangling &T in Weak<T>::drop)
- #80491 (Miri: make size/align_of_val work for dangling raw ptrs)
- #80495 (Rename kw::Invalid -> kw::Empty)
- #80513 (Add regression test for #80062)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add "chr" as doc alias to char::from_u32
Many programming languages provide a function called `chr` - Perl, Python, PHP, Visual Basic, SQL. This change makes `char::from_u32` easier to discover in the documentation.
`ord` is not added as its name conflicts with `Ord` trait, and it's not exactly clear what it could point to (`<u32 as From<char>>::from`?). I don't think it's exactly necessary, as `char::from_u32` documentation page says you can do reverse conversion with `as` operator anyway.
Add "length" as doc alias to len methods
Currently when searching for `length` there are no results: https://doc.rust-lang.org/std/?search=length. This makes `len` methods appear when searching for `length`.
Add `impl Div<NonZeroU{0}> for u{0}` which cannot panic
Dividing an unsigned int by a `NonZeroUxx` requires a user to write (for example, in [this SO question](https://stackoverflow.com/questions/64855738/how-to-inform-the-optimizer-that-nonzerou32get-will-never-return-zero)):
```
pub fn safe_div(x: u32, y: std::num::NonZeroU32) -> u32 {
x / y.get()
}
```
which generates a panicking-checked-div [assembly](https://godbolt.org/#g:!((g:!((g:!((h:codeEditor,i:(fontScale:14,j:1,lang:rust,selection:(endColumn:2,endLineNumber:6,positionColumn:2,positionLineNumber:6,selectionStartColumn:2,selectionStartLineNumber:6,startColumn:2,startLineNumber:6),source:%27pub+fn+div(x:+u32,+y:+u32)+-%3E+u32+%7B%0A++++x+/+y%0A%7D%0Apub+fn+safe_div(x:+u32,+y:+std::num::NonZeroU32)+-%3E+u32+%7B%0A++++x+/+y.get()+//+an+unchecked+division+expected%0A%7D%27),l:%275%27,n:%270%27,o:%27Rust+source+%231%27,t:%270%27)),k:50,l:%274%27,n:%270%27,o:%27%27,s:0,t:%270%27),(g:!((h:compiler,i:(compiler:r1470,filters:(b:%270%27,binary:%271%27,commentOnly:%270%27,demangle:%270%27,directives:%270%27,execute:%271%27,intel:%270%27,libraryCode:%271%27,trim:%271%27),fontScale:14,j:1,lang:rust,libs:!(),options:%27-O%27,selection:(endColumn:1,endLineNumber:1,positionColumn:1,positionLineNumber:1,selectionStartColumn:1,selectionStartLineNumber:1,startColumn:1,startLineNumber:1),source:1),l:%275%27,n:%270%27,o:%27rustc+1.47.0+(Editor+%231,+Compiler+%231)+Rust%27,t:%270%27)),k:50,l:%274%27,n:%270%27,o:%27%27,s:0,t:%270%27)),l:%272%27,n:%270%27,o:%27%27,t:%270%27)),version:4).
Avoiding the `panic` currently requires `unsafe` code.
This PR adds an `impl Div<NonZeroU{0}> for u{0}` (and `impl Rem<NonZeroU{0}> for u{0}`) which calls the `unchecked_div` (and `unchecked_rem`) intrinsic without any additional checks,
making the following code compile:
```
pub fn safe_div(x: u32, y: std::num::NonZeroU32) -> u32 {
x / y
}
pub fn safe_rem(x: u32, y: std::num::NonZeroU32) -> u32 {
x % y
}
```
The doc is set to match the regular div impl [docs](https://doc.rust-lang.org/beta/src/core/ops/arith.rs.html#460).
I've marked these as stable because (as I understand it) trait impls are automatically stable. I'm happy to change it to unstable if needed.
Following `@dtolnay` template from a similar issue:
this adds the following **stable** impls, which rely on dividing unsigned integers by nonzero integers being well defined and previously would have involved unsafe code to encode that knowledge:
```
impl Div<NonZeroU8> for u8 {
type Output = u8;
}
impl Rem<NonZeroU8> for u8 {
type Output = u8;
}
```
and equivalent for u16, u32, u64, u128, usize, but **not** for i8, i16, i32, i64, i128, isize (since -1/MIN is undefined).
r? `@dtolnay`
Stabilize `core::slice::fill`
Tracking issue https://github.com/rust-lang/rust/issues/70758
Stabilizes the `core::slice::fill` API in Rust 1.50, adding a `memset` doc alias so people coming from C/C++ looking for this operation can find it in the docs. This API hasn't seen any changes since we changed the signature in https://github.com/rust-lang/rust/pull/71165/, and it seems like the right time to propose stabilization. Thanks!
r? `@m-ou-se`
Deprecate atomic compare_and_swap method
Finish implementing [RFC 1443](https://github.com/rust-lang/rfcs/blob/master/text/1443-extended-compare-and-swap.md) (https://github.com/rust-lang/rfcs/pull/1443).
It was decided to deprecate `compare_and_swap` [back in Rust 1.12 already](https://github.com/rust-lang/rust/issues/31767#issuecomment-215903038). I can't find any info about that decision being reverted. My understanding is just that it has been forgotten. If there has been a decision on keeping `compare_and_swap` then it's hard to find, and even if this PR does not go through it can act as a place where people can find out about the decision being reverted.
Atomic operations are hard to understand, very hard. And it does not help that there are multiple similar methods to do compare and swap with. They are so similar that for a reader it might be hard to understand the difference. This PR aims to make that simpler by finally deprecating `compare_and_swap` which is essentially just a more limited version of `compare_exchange`. The documentation is also updated (according to the RFC text) to explain the differences a bit better.
Even if we decide to not deprecate `compare_and_swap`. I still think the documentation for the atomic operations should be improved to better describe their differences and similarities. And the documentation can be written nicer than the PR currently proposes, but I wanted to start somewhere. Most of it is just copied from the RFC.
The documentation for `compare_exchange` and `compare_exchange_weak` indeed describe how they work! The problem is that they are more complex and harder to understand than `compare_and_swap`. So for someone who does not fully grasp this they might fall back to using `compare_and_swap`. Making the documentation outline the similarities and differences might build a bridge for people so they can cross over to the more powerful and sometimes more efficient operations.
The conversions I do to avoid the `std` internal deprecation errors are very straight forward `compare_and_swap -> compare_exchange` changes where the orderings are just using the mapping in the new documentation. Only in one place did I use `compare_exchange_weak`. This can probably be improved further. But the goal here was not for those operations to be perfect. Just to not get worse and to allow the deprecation to happen.
Added [T; N]::zip()
This is my first PR to rust so I hope I have done everything right, or at least close :)
---
This is PR adds the array method `[T; N]::zip()` which, in my mind, is a natural extension to #75212.
My implementation of `zip()` is mostly just a modified copy-paste of `map()`. Should I keep the comments? Also am I right in assuming there should be no way for the `for`-loop to panic, thus no need for the dropguard seen in the `map()`-function?
The doc comment is in a similar way a slightly modified copy paste of [`Iterator::zip()`](https://doc.rust-lang.org/beta/std/iter/trait.Iterator.html#method.zip)
`@jplatte` mentioned in [#75490](https://github.com/rust-lang/rust/pull/75490#issuecomment-677790758) `zip_with()`,
> zip and zip_with seem like they would be useful :)
is this something I should add (assuming there is interest for this PR at all :))
