Remove `Ipv6Addr::is_unicast_link_local_strict`
Removes the unstable method `Ipv6Addr::is_unicast_link_local_strict` and keeps the behaviour of `Ipv6Addr::is_unicast_link_local`, see also #85604 where I have tried to summarize related discussion so far.
My intent is for `is_unicast_link_local`, `is_unicast_site_local` and `is_unicast_global` to have the semantics of checking if an address has Link-Local, Site-Local or Global scope, see also #85696 which changes the behaviour of `is_unicast_global` and renames these methods to `has_unicast_XXX_scope` to reflect this.
For checking Link-Local scope we currently have two methods: `is_unicast_link_local` and `is_unicast_link_local_strict`. This is because of what appears to be conflicting definitions in [IETF RFC 4291](https://datatracker.ietf.org/doc/html/rfc4291).
From [IETF RFC 4291 section 2.4](https://datatracker.ietf.org/doc/html/rfc4291#section-2.4): "Link-Local unicast" (`FE80::/10`)
```text
Address type Binary prefix IPv6 notation Section
------------ ------------- ------------- -------
Unspecified 00...0 (128 bits) ::/128 2.5.2
Loopback 00...1 (128 bits) ::1/128 2.5.3
Multicast 11111111 FF00::/8 2.7
Link-Local unicast 1111111010 FE80::/10 2.5.6
Global Unicast (everything else)
```
From [IETF RFC 4291 section 2.5.6](https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.6): "Link-Local IPv6 Unicast Addresses" (`FE80::/64`)
```text
| 10 bits | 54 bits | 64 bits |
+----------+-------------------------+----------------------------+
|1111111010| 0 | interface ID |
+----------+-------------------------+----------------------------+
```
With `is_unicast_link_local` checking `FE80::/10` and `is_unicast_link_local_strict` checking `FE80::/64`.
There is also [IETF RFC 5156 section 2.4](https://datatracker.ietf.org/doc/html/rfc5156#section-2.4) which defines "Link-Scoped Unicast" as `FE80::/10`.
It has been pointed out that implementations in other languages and the linux kernel all use `FE80::/10` (https://github.com/rust-lang/rust/pull/76098#issuecomment-706916840, https://github.com/rust-lang/rust/pull/76098#issuecomment-705928605).
Given all of this I believe the correct interpretation to be the following: All addresses in `FE80::/10` are defined as having Link-Local scope, however currently only the block `FE80::/64` has been allocated for "Link-Local IPv6 Unicast Addresses". This might change in the future however; more addresses in `FE80::/10` could be allocated and those will have Link-Local scope. I therefore believe the current behaviour of `is_unicast_link_local` to be correct (if interpreting it to have the semantics of `has_unicast_link_local_scope`) and `is_unicast_link_local_strict` to be unnecessary, confusing and even a potential source of future bugs:
Currently there is no real difference in checking `FE80::/10` or `FE80::/64`, since any address in practice will be `FE80::/64`. However if an application uses `is_unicast_link_local_strict` to implement link-local (so non-global) behaviour, it will be incorrect in the future if addresses outside of `FE80::/64` are allocated.
r? `@joshtriplett` as reviewer of all the related PRs
Per discussion in #84326. For trait implementations, this was
misleading: the items actually do have documentation (but it comes from
the trait definition).
For both trait implementations and trait implementors, this was
redundant: in both of those cases, the items are default-hidden by
different toggle at the level above.
Update tests: Remove XPath selectors that over-specified on details tag,
in cases that weren't testing toggles. Add an explicit test for toggles
on methods. Rename item-hide-threshold to toggle-item-contents for
consistency.
Fix span of redundant generic arguments
Fixes#71563
Above issue is about lifetime arguments, but generic arguments also have same problem.
This PR fixes both help messages.
Add `String::extend_from_within`
This PR adds `String::extend_from_within` function under the `string_extend_from_within` feature gate similar to the [`Vec::extend_from_within`] function.
```rust
// String
pub fn extend_from_within<R>(&mut self, src: R)
where
R: RangeBounds<usize>;
```
[`Vec::extend_from_within`]: https://github.com/rust-lang/rust/issues/81656
Add documentation for aarch64-apple-ios-sim target
Documentation as requested for [MCP 428](https://github.com/rust-lang/compiler-team/issues/428) to promote this target to Tier 2.
Currently it calls out that it's Tier 3. That should be changed if this target is promoted, but this PR could also land before that.
Note: probably should get signoff from the compiler team based on that MCP.
Use correct edition when parsing `:pat` matchers
As described in issue #85708, we currently do not properly decode
`SyntaxContext::root()` and `ExpnId::root()` from foreign crates. As a
result, when we decode a span from a foreign crate with
`SyntaxContext::root()`, we end up up considering it to have the edition
of the *current* crate, instead of the foreign crate where it was
originally created.
A full fix for this issue will be a fairly significant undertaking.
Fortunately, it's possible to implement a partial fix, which gives us
the correct edition-dependent behavior for `:pat` matchers when the
macro is loaded from another crate. Since we have the edition of the
macro's defining crate available, we can 'recover' from seeing a
`SyntaxContext::root()` and use the edition of the macro's defining
crate.
Any solution to issue #85708 must reproduce the behavior of this
targeted fix - properly preserving a foreign `SyntaxContext::root()`
means (among other things) preserving its edition, which by definition
is the edition of the foreign crate itself. Therefore, this fix moves us
closer to the correct overall solution, and does not expose any new
incorrect behavior to macros.
Add eslint checks to CI
It also allowed me to fix some potential issues that went unnoticed. Having this process automated will hopefully prevent us to add more errors. :)
cc `@Mark-Simulacrum` (for the add in the CI).
r? `@jsha`
Use command line metadata path if provided
If the command-line has `--emit metadata=some/path/libfoo.rmeta` then
use that.
Closes#85356
I couldn't find any existing tests for the `--emit TYPE=PATH` command line syntax, so I wasn't sure how to test this aside from ad-hoc manual testing. Is there a ui test type for "generated output file with expected name"?
Merge CrateDisambiguator into StableCrateId
This simplifies the code and potentially improves performance by reducing the amount of hashed data.
Fixes https://github.com/rust-lang/rust/issues/85795
Error code checker improvement
Just realized that some error codes shouldn't be ignored anymore. So I updated the script to ensure that if an error code is tested and ignored, it will trigger an error.
Revert "Auto merge of #83770 - the8472:tra-extend, r=Mark-Simulacrum"
Due to a performance regression that didn't show up in the original perf run
this reverts commit 9111b8ae97 (#83770), reversing
changes made to 9a700d2947.
Since since is expected to have the inverse impact it should probably be rollup=never.
r? `@Mark-Simulacrum`
Make `Step` trait safe to implement
This PR makes a few modifications to the `Step` trait that I believe better position it for stabilization in the short term. In particular,
1. `unsafe trait TrustedStep` is introduced, indicating that the implementation of `Step` for a given type upholds all stated invariants (which have remained unchanged). This is gated behind a new `trusted_step` feature, as stabilization is realistically blocked on min_specialization.
2. The `Step` trait is internally specialized on the `TrustedStep` trait, which avoids a serious performance regression.
3. `TrustedLen` is implemented for `T: TrustedStep` as the latter's invariants subsume the former's.
4. The `Step` trait is no longer `unsafe`, as the invariants must not be relied upon by unsafe code (unless the type implements `TrustedStep`).
5. `TrustedStep` is implemented for all types that implement `Step` in the standard library and compiler.
6. The `step_trait_ext` feature is merged into the `step_trait` feature. I was unable to find any reasoning for the features being split; the `_unchecked` methods need not necessarily be stabilized at the same time, but I think it is useful to have them under the same feature flag.
All existing implementations of `Step` will be broken, as it is not possible to `unsafe impl` a safe trait. Given this trait only exists on nightly, I feel this breakage is acceptable. The blanket `impl<T: Step> TrustedLen for T` will likely cause some minor breakage, but this should be covered by the equivalent impl for `TrustedStep`.
Hopefully these changes are sufficient to place `Step` in decent position for stabilization, which would allow user-defined types to be used with `a..b` syntax.
