Partially stabilize `duration_consts_2`
Methods that were only blocked on `const_panic` have been stabilized.
The remaining methods of `duration_consts_2` are all related to floats,
and as such have been placed behind the `duration_consts_float` feature
gate.
kernel_copy: avoid panic on unexpected OS error
According to documentation, the listed errnos should only occur
if the `copy_file_range` call cannot be made at all, so the
assert be correct. However, since in practice file system
drivers (incl. FUSE etc.) can return any errno they want, we
should not panic here.
Fixes#91152
According to documentation, the listed errnos should only occur
if the `copy_file_range` call cannot be made at all, so the
assert be correct. However, since in practice file system
drivers (incl. FUSE etc.) can return any errno they want, we
should not panic here.
Fixes#91152
Methods that were only blocked on `const_panic` have been stabilized.
The remaining methods of `duration_consts_2` are all related to floats,
and as such have been placed behind the `duration_consts_float` feature
gate.
Mention std::io::Error::from(ErrorKind) in Error::new() docs
This conversion is not very discoverable for the cases
where an error is required without extra payload.
Simplify `for` loop desugar
Basically two intermediate bindings are inlined. I could have left one intermediate binding in place as this would simplify some diagnostic logic, but I think the difference in that regard would be negligible, so it is better to have a minimal HIR.
For checking that the pattern is irrefutable, I added a special case when the `match` is found to be non-exhaustive.
The reordering of the arms is purely stylistic. I don't *think* there are any perf implications.
```diff
match IntoIterator::into_iter($head) {
mut iter => {
$label: loop {
- let mut __next;
match Iterator::next(&mut iter) {
- Some(val) => __next = val,
None => break,
+ Some($pat) => $block,
}
- let $pat = __next;
- $block
}
}
}
```
The functions are now `unsafe` and they use `Option::unwrap_unchecked` instead of `unwrap_or_0`
`unwrap_or_0` was added in 42357d772b. I guess `unwrap_unchecked` was not available back then.
Given this example:
```rust
pub fn first_char(s: &str) -> Option<char> {
s.chars().next()
}
```
Previously, the following assembly was produced:
```asm
_ZN7example10first_char17ha056ddea6bafad1cE:
.cfi_startproc
test rsi, rsi
je .LBB0_1
movzx edx, byte ptr [rdi]
test dl, dl
js .LBB0_3
mov eax, edx
ret
.LBB0_1:
mov eax, 1114112
ret
.LBB0_3:
lea r8, [rdi + rsi]
xor eax, eax
mov r9, r8
cmp rsi, 1
je .LBB0_5
movzx eax, byte ptr [rdi + 1]
add rdi, 2
and eax, 63
mov r9, rdi
.LBB0_5:
mov ecx, edx
and ecx, 31
cmp dl, -33
jbe .LBB0_6
cmp r9, r8
je .LBB0_9
movzx esi, byte ptr [r9]
add r9, 1
and esi, 63
shl eax, 6
or eax, esi
cmp dl, -16
jb .LBB0_12
.LBB0_13:
cmp r9, r8
je .LBB0_14
movzx edx, byte ptr [r9]
and edx, 63
jmp .LBB0_16
.LBB0_6:
shl ecx, 6
or eax, ecx
ret
.LBB0_9:
xor esi, esi
mov r9, r8
shl eax, 6
or eax, esi
cmp dl, -16
jae .LBB0_13
.LBB0_12:
shl ecx, 12
or eax, ecx
ret
.LBB0_14:
xor edx, edx
.LBB0_16:
and ecx, 7
shl ecx, 18
shl eax, 6
or eax, ecx
or eax, edx
ret
```
After this change, the assembly is reduced to:
```asm
_ZN7example10first_char17h4318683472f884ccE:
.cfi_startproc
test rsi, rsi
je .LBB0_1
movzx ecx, byte ptr [rdi]
test cl, cl
js .LBB0_3
mov eax, ecx
ret
.LBB0_1:
mov eax, 1114112
ret
.LBB0_3:
mov eax, ecx
and eax, 31
movzx esi, byte ptr [rdi + 1]
and esi, 63
cmp cl, -33
jbe .LBB0_4
movzx edx, byte ptr [rdi + 2]
shl esi, 6
and edx, 63
or edx, esi
cmp cl, -16
jb .LBB0_7
movzx ecx, byte ptr [rdi + 3]
and eax, 7
shl eax, 18
shl edx, 6
and ecx, 63
or ecx, edx
or eax, ecx
ret
.LBB0_4:
shl eax, 6
or eax, esi
ret
.LBB0_7:
shl eax, 12
or eax, edx
ret
```
Adds IEEE 754-2019 minimun and maximum functions for f32/f64
IEEE 754-2019 removed the `minNum` (`min` in Rust) and `maxNum` (`max` in Rust) operations in favor of the newly created `minimum` and `maximum` operations due to their [non-associativity](https://grouper.ieee.org/groups/msc/ANSI_IEEE-Std-754-2019/background/minNum_maxNum_Removal_Demotion_v3.pdf) that cannot be fix in a backwards compatible manner. This PR adds `fN::{minimun,maximum}` functions following the new rules.
### IEEE 754-2019 Rules
> **minimum(x, y)** is x if x < y, y if y < x, and a quiet NaN if either operand is a NaN, according to 6.2.
For this operation, −0 compares less than +0. Otherwise (i.e., when x = y and signs are the same)
it is either x or y.
> **maximum(x, y)** is x if x > y, y if y > x, and a quiet NaN if either operand is a NaN, according to 6.2.
For this operation, +0 compares greater than −0. Otherwise (i.e., when x = y and signs are the
same) it is either x or y.
"IEEE Standard for Floating-Point Arithmetic," in IEEE Std 754-2019 (Revision of IEEE 754-2008) , vol., no., pp.1-84, 22 July 2019, doi: 10.1109/IEEESTD.2019.8766229.
### Implementation
This implementation is inspired by the one in [`glibc` ](90f0ac10a7/math/s_fminimum_template.c) (it self derived from the C2X draft) expect that:
- it doesn't use `copysign` because it's not available in `core` and also because `copysign` is unnecessary (we only want to check the sign, no need to create a new float)
- it also prefer `other > self` instead of `self < other` like IEEE 754-2019 does
I originally tried to implement them [using intrinsics](1d8aa13bc3) but LLVM [error out](https://godbolt.org/z/7sMrxW49a) when trying to lower them to machine intructions, GCC doesn't yet have built-ins for them, only cranelift support them nativelly (as it doesn't support the nativelly the old sementics).
Helps with https://github.com/rust-lang/rust/issues/83984
Rollup of 6 pull requests
Successful merges:
- #89741 (Mark `Arc::from_inner` / `Rc::from_inner` as unsafe)
- #90927 (Fix float ICE)
- #90994 (Fix ICE `#90993`: add missing call to cancel)
- #91018 (Adopt let_else in more places in rustc_mir_build)
- #91022 (Suggest `await` in more situations where infer types are involved)
- #91088 (Revert "require full validity when determining the discriminant of a value")
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Mark `Arc::from_inner` / `Rc::from_inner` as unsafe
While it's an internal function, it is easy to create invalid Arc/Rcs to
a dangling pointer with it.
Fixes https://github.com/rust-lang/rust/issues/89740
Windows: Resolve `process::Command` program without using the current directory
Currently `std::process::Command` searches many directories for the executable to run, including the current directory. This has lead to a [CVE for `ripgrep`](https://cve.circl.lu/cve/CVE-2021-3013) but presumably other command line utilities could be similarly vulnerable if they run commands. This was [discussed on the internals forum](https://internals.rust-lang.org/t/std-command-resolve-to-avoid-security-issues-on-windows/14800). Also discussed was [which directories should be searched](https://internals.rust-lang.org/t/windows-where-should-command-new-look-for-executables/15015).
EDIT: This PR originally removed all implicit paths. They've now been added back as laid out in the rest of this comment.
## Old Search Strategy
The old search strategy is [documented here][1]. Additionally Rust adds searching the child's paths (see also #37519). So the full list of paths that were searched was:
1. The directories that are listed in the child's `PATH` environment variable.
2. The directory from which the application loaded.
3. The current directory for the parent process.
4. The 32-bit Windows system directory.
5. The 16-bit Windows system directory.
6. The Windows directory.
7. The directories that are listed in the PATH environment variable.
## New Search Strategy
The new strategy removes the current directory from the searched paths.
1. The directories that are listed in the child's PATH environment variable.
2. The directory from which the application loaded.
3. The 32-bit Windows system directory.
4. The Windows directory.
5. The directories that are listed in the parent's PATH environment variable.
Note that it also removes the 16-bit system directory, mostly because there isn't a function to get it. I do not anticipate this being an issue in modern Windows.
## Impact
Removing the current directory should fix CVE's like the one linked above. However, it's possible some Windows users of affected Rust CLI applications have come to expect the old behaviour.
This change could also affect small Windows-only script-like programs that assumed the current directory would be used. The user would need to use `.\file.exe` instead of the bare application name.
This PR could break tests, especially those that test the exact output of error messages (e.g. Cargo) as this does change the error messages is some cases.
[1]: https://docs.microsoft.com/en-us/windows/win32/api/processthreadsapi/nf-processthreadsapi-createprocessa#parameters
Makes docs for references a little less confusing
- Make clear that the `Pointer` trait is related to formatting
- Make clear that the `Pointer` trait is implemented for references (previously it was confusing to first see that it's implemented and then see it in "expect")
- Make clear that `&T` (shared reference) implements `Send` (if `T: Send + Sync`)
Make char conversion functions unstably const
The char conversion functions like `char::from_u32` do trivial computations and can easily be converted into const fns. Only smaller tricks are needed to avoid non-const standard library functions like `Result::ok` or `bool::then_some`.
Tracking issue: https://github.com/rust-lang/rust/issues/89259
std: Tweak expansion of thread-local const
This commit tweaks the expansion of `thread_local!` when combined with a
`const { ... }` value to help ensure that the rules which apply to
`const { ... }` blocks will be the same as when they're stabilized.
Previously with this invocation:
thread_local!(static NAME: Type = const { init_expr });
this would generate (on supporting platforms):
#[thread_local]
static NAME: Type = init_expr;
instead the macro now expands to:
const INIT_EXPR: Type = init_expr;
#[thread_local]
static NAME: Type = INIT_EXPR;
with the hope that because `init_expr` is defined as a `const` item then
it's not accidentally allowing more behavior than if it were put into a
`static`. For example on the stabilization issue [this example][ex] now
gives the same error both ways.
[ex]: https://github.com/rust-lang/rust/issues/84223#issuecomment-953384298
Rollup of 8 pull requests
Successful merges:
- #90386 (Add `-Zassert-incr-state` to assert state of incremental cache)
- #90438 (Clean up mess for --show-coverage documentation)
- #90480 (Mention `Vec::remove` in `Vec::swap_remove`'s docs)
- #90607 (Make slice->str conversion and related functions `const`)
- #90750 (rustdoc: Replace where-bounded Clean impl with simple function)
- #90895 (require full validity when determining the discriminant of a value)
- #90989 (Avoid suggesting literal formatting that turns into member access)
- #91002 (rustc: Remove `#[rustc_synthetic]`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
std: Get the standard library compiling for wasm64
This commit goes through and updates various `#[cfg]` as appropriate to
get the wasm64-unknown-unknown target behaving similarly to the
wasm32-unknown-unknown target. Most of this is just updating various
conditions for `target_arch = "wasm32"` to also account for `target_arch
= "wasm64"` where appropriate. This commit also lists `wasm64` as an
allow-listed architecture to not have the `restricted_std` feature
enabled, enabling experimentation with `-Z build-std` externally.
The main goal of this commit is to enable playing around with
`wasm64-unknown-unknown` externally via `-Z build-std` in a way that's
similar to the `wasm32-unknown-unknown` target. These targets are
effectively the same and only differ in their pointer size, but wasm64
is much newer and has much less ecosystem/library support so it'll still
take time to get wasm64 fully-fledged.
This commit makes the following functions from `core::str` `const fn`:
- `from_utf8[_mut]` (`feature(const_str_from_utf8)`)
- `from_utf8_unchecked_mut` (`feature(const_str_from_utf8_unchecked_mut)`)
- `Utf8Error::{valid_up_to,error_len}` (`feature(const_str_from_utf8)`)
Add Vec::retain_mut
This is to continue the discussion started in #83218.
Original comment was:
> Take 2 of #34265, since I needed this today.
The reason I think why we should add `retain_mut` is for coherency and for discoverability. For example we have `chunks` and `chunks_mut` or `get` and `get_mut` or `iter` and `iter_mut`, etc. When looking for mutable `retain`, I would expect `retain_mut` to exist. It took me a while to find out about `drain_filter`. So even if it provides an API close to `drain_filter`, just for the discoverability, I think it's worth it.
cc ``````@m-ou-se`````` ``````@jonas-schievink`````` ``````@Mark-Simulacrum``````
Permit const panics in stable const contexts in stdlib
Without this change, it is not possible to use `panic!` and similar (including `assert!`) in stable const contexts inside of stdlib. See #89542 for a real-world case that currently fails for this reason. This does _not_ affect any user code.
For example, this snippet currently fails to compile:
```rust
#[stable(feature = "foo", since = "1.0.0")]
#[rustc_const_stable(feature = "foo", since = "1.0.0")]
const fn foo() {
assert!(false);
assert!(false, "foo");
}
```
With the addition of `#[rustc_const_unstable]` to `core::panicking::panic`, the error no longer occurs. This snippet has been added verbatim in this PR as a UI test.
To avoid needing to add `#![feature(core_panic)]` to libcore, the two instances of direct calls to `core::panicking::panic` have been switched to use the `panic!` macro.
I am requesting prioritization because this is holding up other stabilizations such as #89542 (which is otherwise ready to merge and succeeds with this change)
Remove bigint_helper_methods for *signed* types
This PR inspired by `@cuviper's` comment @ https://github.com/rust-lang/rust/issues/90541#issuecomment-967309808
These are working well for *unsigned* types, so keep those, but for the the *signed* ones there are a bunch of questions about what the semantics and API should be. For the main "helpers for big integer implementations" use, there's no need for the signed versions anyway. There are plenty of other methods which exist for unsigned types but not signed ones, like `next_power_of_two`, so this isn't unusual.
Fixes#90541
Tracking issue #85532
Rename WASI's `is_character_device` to `is_char_device`.
Rename WASI's `FileTypeExt::is_character_device` to
`FileTypeExt::is_char_device`, for consistency with the Unix
`FileTypeExt::is_char_device`.
Also, add a `FileTypeExt::is_socket` function, for consistency with the
Unix `FileTypeExt::is_socket` function.
r? `@alexcrichton`
MIRI says `reverse` is UB, so replace it with something LLVM can vectorize
For small types with padding, the current implementation is UB because it does integer operations on uninit values.
```
error: Undefined Behavior: using uninitialized data, but this operation requires initialized memory
--> /playground/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/core/src/num/mod.rs:836:5
|
836 | / uint_impl! { u32, u32, i32, 32, 4294967295, 8, "0x10000b3", "0xb301", "0x12345678",
837 | | "0x78563412", "0x1e6a2c48", "[0x78, 0x56, 0x34, 0x12]", "[0x12, 0x34, 0x56, 0x78]", "", "" }
| |________________________________________________________________________________________________^ using uninitialized data, but this operation requires initialized memory
|
= help: this indicates a bug in the program: it performed an invalid operation, and caused Undefined Behavior
= help: see https://doc.rust-lang.org/nightly/reference/behavior-considered-undefined.html for further information
= note: inside `core::num::<impl u32>::rotate_left` at /playground/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/core/src/num/uint_macros.rs:211:13
= note: inside `core::slice::<impl [Foo]>::reverse` at /playground/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/core/src/slice/mod.rs:701:58
```
<https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=340739f22ca5b457e1da6f361768edc6>
But LLVM has gotten smarter since I wrote the previous implementation in 2017, so this PR removes all the manual magic and just writes it in such a way that LLVM will vectorize. This code is much simpler and has very little `unsafe`, and is actually faster to boot!
If you're curious to see the codegen: <https://rust.godbolt.org/z/Pcn13Y9E3>
Before:
```
running 7 tests
test slice::reverse_simd_f64x4 ... bench: 17,940 ns/iter (+/- 481) = 58448 MB/s
test slice::reverse_u128 ... bench: 17,758 ns/iter (+/- 205) = 59048 MB/s
test slice::reverse_u16 ... bench: 158,234 ns/iter (+/- 6,876) = 6626 MB/s
test slice::reverse_u32 ... bench: 62,047 ns/iter (+/- 1,117) = 16899 MB/s
test slice::reverse_u64 ... bench: 31,582 ns/iter (+/- 552) = 33201 MB/s
test slice::reverse_u8 ... bench: 81,253 ns/iter (+/- 1,510) = 12905 MB/s
test slice::reverse_u8x3 ... bench: 270,615 ns/iter (+/- 11,463) = 3874 MB/s
```
After:
```
running 7 tests
test slice::reverse_simd_f64x4 ... bench: 17,731 ns/iter (+/- 306) = 59137 MB/s
test slice::reverse_u128 ... bench: 17,919 ns/iter (+/- 239) = 58517 MB/s
test slice::reverse_u16 ... bench: 43,160 ns/iter (+/- 607) = 24295 MB/s
test slice::reverse_u32 ... bench: 21,065 ns/iter (+/- 371) = 49778 MB/s
test slice::reverse_u64 ... bench: 21,118 ns/iter (+/- 482) = 49653 MB/s
test slice::reverse_u8 ... bench: 76,878 ns/iter (+/- 1,688) = 13639 MB/s
test slice::reverse_u8x3 ... bench: 264,723 ns/iter (+/- 5,544) = 3961 MB/s
```
Those are the existing benches, <14a2fd640e/library/alloc/benches/slice.rs (L322-L346)>
