Fix non-existent-field ICE for generic fields.
I mentioned this ICE in a chat and it took about 3 milliseconds before `@eddyb` found the problem and said this change would fix it. :)
This also changes one the field types in the related test to one that triggered the ICE.
Fixes#81627.
Fixes#81672.
Fixes#81709.
Cc https://github.com/rust-lang/rust/pull/81480 `@b-naber` `@estebank.`
Reduce tab formatting assertions to debug only
The tab replacement for diagnostics added in #79757 included a few assertions to ensure all tab characters are handled appropriately. We've started getting reports of these assertions firing (#81614). Since it's only a cosmetic issue, this downgrades the assertions to debug only, so we at least continue compiling even if the diagnostics might be a tad wonky.
Minimizes the impact of #81614
Remove incorrect `delay_span_bug`
The following code is supposed to compile
```rust
use std::ops::BitOr;
pub trait IntWrapper {
type InternalStorage;
}
impl<T> BitOr for dyn IntWrapper<InternalStorage = T>
where
Self: Sized,
T: BitOr + BitOr<Output = T>,
{
type Output = Self;
fn bitor(self, _other: Self) -> Self {
todo!()
}
}
```
Before this change it would ICE. In #70998 the removed logic was added
to provide better suggestions, and the `delay_span_bug` guard was added
to protect against a potential logic error when returning traits. As it
happens, there are cases, like the one above, where traits can indeed be
returned, so valid code was being rejected.
Fix (but not close) #80207.
make const_err a future incompat lint
This is the first step for https://github.com/rust-lang/rust/issues/71800: make const_err a future-incompat lint. I also rewrote the const_err lint description as the old one seemed wrong.
This has the unfortunate side-effect of making const-eval error even more verbose by making the const_err message longer without fixing the redundancy caused by additionally emitting an error on each use site of the constant. We cannot fix that redundancy until const_err is a *hard* error (at that point the error-on-use-site can be turned into a `delay_span_bug!` for uses of monomorphic consts, and into a nicely rendered error for [lazily / post-monomorhization evaluated] associated consts).
~~The one annoying effect of this PR is that `let _x = &(1/(1-1));` now also shows the future-incompat warning, even though of course we will *not* make this a hard error. We'll instead (hopefully) stop promoting it -- see https://github.com/rust-lang/rfcs/pull/3027. The only way I see to avoid the future-incompat warning is to use a different lint for "failure to evaluate promoted".~~
Cc `@rust-lang/wg-const-eval`
The tab replacement for diagnostics added in #79757 included a few assertions to
ensure all tab characters are handled appropriately. We've started getting
reports of these assertions firing (#81614). Since it's only a cosmetic issue,
this downgrades the assertions to debug only, so we at least continue compiling
even if the diagnostics might be a tad wonky.
Fixes#81614
The following code is supposed to compile
```rust
use std::ops::BitOr;
pub trait IntWrapper {
type InternalStorage;
}
impl<T> BitOr for dyn IntWrapper<InternalStorage = T>
where
Self: Sized,
T: BitOr + BitOr<Output = T>,
{
type Output = Self;
fn bitor(self, _other: Self) -> Self {
todo!()
}
}
```
Before this change it would ICE. In #70998 the removed logic was added
to provide better suggestions, and the `delay_span_bug` guard was added
to protect against a potential logic error when returning traits. As it
happens, there are cases, like the one above, where traits can indeed be
returned, so valid code was being rejected.
Fix#80207.
Add a new ABI to support cmse_nonsecure_call
This adds support for the `cmse_nonsecure_call` feature to be able to perform non-secure function call.
See the discussion on Zulip [here](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Support.20for.20callsite.20attributes/near/223054928).
This is a followup to #75810 which added `cmse_nonsecure_entry`. As for that PR, I assume that the changes are small enough to not have to go through a RFC but I don't mind doing one if needed 😃
I did not yet create a tracking issue, but if most of it is fine, I can create one and update the various files accordingly (they refer to the other tracking issue now).
On the Zulip chat, I believe `@jonas-schievink` volunteered to be a reviewer 💯
Improve wording of suggestion about accessing field
Follow-up to #81504
The compiler at this moment suggests "you might have meant to use field `b` of type `B`", sounding like it's type `B` which has the field `b`.
r? ```@estebank```
Fix bug with assert!() calling the wrong edition of panic!().
The span of `panic!` produced by the `assert` macro did not carry the right edition. This changes `assert` to call the right version.
Also adds tests for the 2021 edition of panic and assert, that would've caught this.
Add better diagnostic for unbounded Abst. Const
~~In the case where a generic abst. const requires a trivial where bound: `where TypeWithConst<const_fn(N)>: ,`,
instead of requiring a where bound, just check that only consts are being substituted in to skip over where check.~~
~~This is pretty sketchy, but I think it works. Presumably, if there is checking for type bounds added later, it can first check nested requirements, and see if they're satisfied by the current `ParamEnv`.~~
Changed the diagnostic to add a better example, which is more practical than what was previously proposed.
r? ```@lcnr```
Add AArch64 big-endian and ILP32 targets
This PR adds 3 new AArch64 targets:
- `aarch64_be-unknown-linux-gnu`
- `aarch64-unknown-linux-gnu_ilp32`
- `aarch64_be-unknown-linux-gnu_ilp32`
It also fixes some ABI issues on big-endian ARM and AArch64.
Upgrade Chalk
~~Blocked on rust-lang/chalk#670~~
~~Now blocked on rust-lang/chalk#680 and release~~
In addition to the straight upgrade, I also tried to fix some tests by properly returning variables and max universes in the solution. Unfortunately, this actually triggers the same perf problem that rustc traits code runs into in `canonicalizer`. Not sure what the root cause of this problem is, or why it's supposed to be solved in chalk.
r? ```@nikomatsakis```
Fix early lints inside an async desugaring
Fixes#81531
When we buffer an early lint for a macro invocation,
we need to determine which NodeId to take the lint level from.
Currently, we use the NodeId of the closest def parent. However, if
the macro invocation is inside the desugared closure from an `async fn`
or async closure, that NodeId does not actually exist in the AST.
This commit uses the parent of a desugared closure when computing
`lint_node_id`, which is something that actually exists in the AST (an
`async fn` or async closure).
Fixes#81531
When we buffer an early lint for a macro invocation,
we need to determine which NodeId to take the lint level from.
Currently, we use the `NodeId` of the closest def parent. However, if
the macro invocation is inside the desugared closure from an `async fn`
or async closure, that `NodeId` does not actually exist in the AST.
This commit explicitly calls `check_lint` for the `NodeId`s of closures
desugared from async expressions, ensuring that we do not miss any
buffered lints.
Box the biggest ast::ItemKind variants
This PR is a different approach on https://github.com/rust-lang/rust/pull/81400, aiming to save memory in humongous ASTs.
The three affected item kind enums are:
- `ast::ItemKind` (208 -> 112 bytes)
- `ast::AssocItemKind` (176 -> 72 bytes)
- `ast::ForeignItemKind` (176 -> 72 bytes)
This commit adds a new ABI to be selected via `extern
"C-cmse-nonsecure-call"` on function pointers in order for the compiler to
apply the corresponding cmse_nonsecure_call callsite attribute.
For Armv8-M targets supporting TrustZone-M, this will perform a
non-secure function call by saving, clearing and calling a non-secure
function pointer using the BLXNS instruction.
See the page on the unstable book for details.
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Remove unneeded `mut` variable
`arg_elide` gets initialized, immediately cloned, and only written to after that.
The last reading access was removed back in
7704762604
Remove the remains of query categories
Back in October 2020 in #77830 ``@cjgillot`` removed the query categories information from the profiler, but the actual definitions which query was in which category remained, although unused.
Here I clean that up, to simplify the query definitions even further.
It's unfortunate that this loses all the context for `git blame`, ~~but I'm working on moving those query definitions into `rustc_query_system`, which will lose that context anyway.~~ EDIT: Might not work out.
The functional changes are in the first commit. The second one only changes the indentation.
Improve handling of spans around macro result parse errors
Fixes#81543
After we expand a macro, we try to parse the resulting tokens as a AST
node. This commit makes several improvements to how we handle spans when
an error occurs:
* Only ovewrite the original `Span` if it's a dummy span. This preserves
a more-specific span if one is available.
* Use `self.prev_token` instead of `self.token` when emitting an error
message after encountering EOF, since an EOF token always has a dummy
span
* Make `SourceMap::next_point` leave dummy spans unused. A dummy span
does not have a logical 'next point', since it's a zero-length span.
Re-using the span span preserves its 'dummy-ness' for other checks
Add lint for 2229 migrations
Implements the first for RFC 2229 where we make the decision to migrate a root variable based on if the type of the variable needs Drop and if the root variable would be moved into the closure when the feature isn't enabled.
r? `@nikomatsakis`
- This allows us add fake information after handling migrations if
needed.
- Capture analysis also priortizes what we see earlier, which means
fake information should go in last.
