rustc: Allow safe #[target_feature] on wasm
This commit updates the compiler's handling of the `#[target_feature]`
attribute when applied to functions on WebAssembly-based targets. The
compiler in general requires that any functions with `#[target_feature]`
are marked as `unsafe` as well, but this commit relaxes the restriction
for WebAssembly targets where the attribute can be applied to safe
functions as well.
The reason this is done is that the motivation for this feature of the
compiler is not applicable for WebAssembly targets. In general the
`#[target_feature]` attribute is used to enhance target CPU features
enabled beyond the basic level for the rest of the compilation. If done
improperly this means that your program could execute an instruction
that the CPU you happen to be running on does not understand. This is
considered undefined behavior where it is unknown what will happen (e.g.
it's not a deterministic `SIGILL`).
For WebAssembly, however, the target is different. It is not possible
for a running WebAssembly program to execute an instruction that the
engine does not understand. If this were the case then the program would
not have validated in the first place and would not run at all. Even if
this were allowed in some hypothetical future where engines have some
form of runtime feature detection (which they do not right now) any
implementation of such a feature would generate a trap if a module
attempts to execute an instruction the module does not understand. This
deterministic trap behavior would still not fall into the category of
undefined behavior because the trap is deterministic.
For these reasons the `#[target_feature]` attribute is now allowed on
safe functions, but only for WebAssembly targets. This notably enables
the wasm-SIMD intrinsics proposed for stabilization in #74372 to be
marked as safe generally instead of today where they're all `unsafe` due
to the historical implementation of `#[target_feature]` in the compiler.
Reduce the amount of untracked state in TyCtxt
Access to untracked global state may generate instances of #84970.
The GlobalCtxt contains the lowered HIR, the resolver outputs and interners.
By wrapping the resolver inside a query, we make sure those accesses are properly tracked.
As a no_hash query, all dependent queries essentially become `eval_always`,
what they should have been from the beginning.
Fix span of redundant generic arguments
Fixes#71563
Above issue is about lifetime arguments, but generic arguments also have same problem.
This PR fixes both help messages.
This commit updates the compiler's handling of the `#[target_feature]`
attribute when applied to functions on WebAssembly-based targets. The
compiler in general requires that any functions with `#[target_feature]`
are marked as `unsafe` as well, but this commit relaxes the restriction
for WebAssembly targets where the attribute can be applied to safe
functions as well.
The reason this is done is that the motivation for this feature of the
compiler is not applicable for WebAssembly targets. In general the
`#[target_feature]` attribute is used to enhance target CPU features
enabled beyond the basic level for the rest of the compilation. If done
improperly this means that your program could execute an instruction
that the CPU you happen to be running on does not understand. This is
considered undefined behavior where it is unknown what will happen (e.g.
it's not a deterministic `SIGILL`).
For WebAssembly, however, the target is different. It is not possible
for a running WebAssembly program to execute an instruction that the
engine does not understand. If this were the case then the program would
not have validated in the first place and would not run at all. Even if
this were allowed in some hypothetical future where engines have some
form of runtime feature detection (which they do not right now) any
implementation of such a feature would generate a trap if a module
attempts to execute an instruction the module does not understand. This
deterministic trap behavior would still not fall into the category of
undefined behavior because the trap is deterministic.
For these reasons the `#[target_feature]` attribute is now allowed on
safe functions, but only for WebAssembly targets. This notably enables
the wasm-SIMD intrinsics proposed for stabilization in #74372 to be
marked as safe generally instead of today where they're all `unsafe` due
to the historical implementation of `#[target_feature]` in the compiler.
Fix incorrect suggestions for E0605
Fixes#84598. Here is a simplified version of the problem presented in issue #84598:
```Rust
#![allow(unused_variables)]
#![allow(dead_code)]
trait T { fn t(&self) -> i32; }
unsafe fn foo(t: *mut dyn T) {
(t as &dyn T).t();
}
fn main() {}
```
The current output is:
```
error[E0605]: non-primitive cast: `*mut (dyn T + 'static)` as `&dyn T`
--> src/main.rs:7:5
|
7 | (t as &dyn T).t();
| ^^^^^^^^^^^^^ invalid cast
|
help: borrow the value for the cast to be valid
|
7 | (&t as &dyn T).t();
| ^
```
This is incorrect, though: The cast will _not_ be valid when writing `&t` instead of `t`:
```
error[E0277]: the trait bound `*mut (dyn T + 'static): T` is not satisfied
--> t4.rs:7:6
|
7 | (&t as &dyn T).t();
| ^^ the trait `T` is not implemented for `*mut (dyn T + 'static)`
|
= note: required for the cast to the object type `dyn T`
```
The correct suggestion is `&*t`, which I have implemented in this pull request. Of course, this suggestion will always require an unsafe block, but arguably, that's what the user really wants if they're trying to cast a pointer to a reference.
In any case, claiming that the cast will be valid after implementing the suggestion is overly optimistic, as the coercion logic doesn't seem to resolve all nested obligations, i.e. the cast may still be invalid after implementing the suggestion. I have therefore rephrased the suggestion slightly ("consider borrowing the value" instead of "borrow the value for the cast to be valid").
Additionally, I have fixed another incorrect suggestion not mentioned in #84598, which relates to casting immutable references to mutable ones:
```rust
fn main() {
let mut x = 0;
let m = &x as &mut i32;
}
```
currently leads to
```
error[E0605]: non-primitive cast: `&i32` as `&mut i32`
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^^^^^^^^^^^^^ invalid cast
|
help: borrow the value for the cast to be valid
|
3 | let m = &mut &x as &mut i32;
| ^^^^
```
which is obviously incorrect:
```
error[E0596]: cannot borrow data in a `&` reference as mutable
--> t5.rs:3:13
|
3 | let m = &mut &x as &mut i32;
| ^^^^^^^ cannot borrow as mutable
```
I've changed the suggestion to a note explaining the problem:
```
error[E0605]: non-primitive cast: `&i32` as `&mut i32`
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^^^^^^^^^^^^^ invalid cast
|
note: this reference is immutable
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^
note: trying to cast to a mutable reference type
--> t5.rs:3:19
|
3 | let m = &x as &mut i32;
| ^^^^^^^^
```
In this example, it would have been even nicer to suggest replacing `&x` with `&mut x`, but this would be much more complex because we would have to take apart the expression to be cast (currently, we only look at its type), and `&x` could be stored in a variable, where such a suggestion would not even be directly applicable:
```rust
fn main() {
let mut x = 0;
let r = &x;
let m = r as &mut i32;
}
```
My solution covers this case, too.
E0599 suggestions and elision of generic argument if no canditate is found
fixes#81576
changes: In error E0599 (method not found) generic argument are eluded if the method was not found anywhere. If the method was found in another inherent implementation suggest that it was found elsewhere.
Example
```rust
struct Wrapper<T>(T);
struct Wrapper2<T> {
x: T,
}
impl Wrapper2<i8> {
fn method(&self) {}
}
fn main() {
let wrapper = Wrapper(i32);
wrapper.method();
let wrapper2 = Wrapper2{x: i32};
wrapper2.method();
}
```
```
Error[E0599]: no method named `method` found for struct `Wrapper<_>` in the current scope
....
error[E0599]: no method named `method` found for struct `Wrapper2<i32>` in the current scope
...
= note: The method was found for Wrapper2<i8>.
```
I am not very happy with the ```no method named `test` found for struct `Vec<_, _>` in the current scope```. I think it might be better to show only one generic argument `Vec<_>` if there is a default one. But I haven't yet found a way to do that,
Adjust self-type check to require equality
When we encounter `SomeType::<X>::foo`, `self_ty` is `SomeType<X>` and the method is defined in an impl on `SomeType<A>`. Previously, we required simply that `self_ty <: impl_ty`, but this is too lax: we should require equality in order to use the method. This was found as part of unrelated work on never type stabilization, but also fixes one of the wf test cases.
Fix missing lifetimes diagnostics after #83759
In #83759 while rebasing I didn't realize there was a new function for suggesting to add lifetime arguments. It relied on some invariants, namely that if a generic type/trait has angle brackets then it must have some generic argument, which is now no longer true. This PR updates that function to handle the new invariants.
This also adds a new regression test but I'm not sure if that's the correct place for it.
Fixes#85347
Report an error if a lang item has the wrong number of generic arguments
This pull request fixes#83893. The issue is that the lang item code currently checks whether the lang item has the correct item kind (e.g. a `#[lang="add"]` has to be a trait), but not whether the item has the correct number of generic arguments.
This can lead to an "index out of bounds" ICE when the compiler tries to create more substitutions than there are suitable types available (if the lang item was declared with too many generic arguments).
For instance, here is a reduced ("reduced" in the sense that it does not trigger additional errors) version of the example given in #83893:
```rust
#![feature(lang_items,no_core)]
#![no_core]
#![crate_type="lib"]
#[lang = "sized"]
trait MySized {}
#[lang = "add"]
trait MyAdd<'a, T> {}
fn ice() {
let r = 5;
let a = 6;
r + a
}
```
On current nightly, this immediately causes an ICE without any warnings or errors emitted. With the changes in this PR, however, I get no ICE and two errors:
```
error[E0718]: `add` language item must be applied to a trait with 1 generic argument
--> pr-ex.rs:8:1
|
8 | #[lang = "add"]
| ^^^^^^^^^^^^^^^
9 | trait MyAdd<'a, T> {}
| ------- this trait has 2 generic arguments, not 1
error[E0369]: cannot add `{integer}` to `{integer}`
--> pr-ex.rs:14:7
|
14 | r + a
| - ^ - {integer}
| |
| {integer}
error: aborting due to 2 previous errors
Some errors have detailed explanations: E0369, E0718.
For more information about an error, try `rustc --explain E0369`.
```
This adds a new lint to `rustc` that is used in rustdoc when a code
block is empty or cannot be parsed as valid Rust code.
Previously this was unconditionally a warning. As such some
documentation comments were (unknowingly) abusing this to pass despite
the `-Dwarnings` used when compiling `rustc`, this should not be the
case anymore.
Remove CrateNum parameter for queries that only work on local crate
The pervasive `CrateNum` parameter is a remnant of the multi-crate rustc idea.
Using `()` as query key in those cases avoids having to worry about the validity of the query key.
Remove support for floating-point constants in asm!
Floating-point constants aren't very useful anyways and this simplifies
the code since the type check can now be done in typeck.
cc `@rust-lang/wg-inline-asm`
r? `@nagisa`
Add support for const operands and options to global_asm!
On x86, the default syntax is also switched to Intel to match asm!.
Currently `global_asm!` only supports `const` operands and the `att_syntax` option. In the future, `sym` operands will also be supported. However there is no plan to support any of the other operand types or options since they don't make sense in the context of `global_asm!`.
r? `@nagisa`
have on_completion record subcycles
have on_completion record subcycles
Rework `on_completion` method so that it removes all
provisional cache entries that are "below" a completed
node (while leaving those entries that are not below
the node).
This corrects an imprecise result that could in turn lead
to an incremental compilation failure. Under the old
scheme, if you had:
* A depends on...
* B depends on A
* C depends on...
* D depends on C
* T: 'static
then the provisional results for A, B, C, and D would all
be entangled. Thus, if A was `EvaluatedToOkModuloRegions`
(because of that final condition), then the result for C and
D would also be demoted to "ok modulo regions".
In reality, though, the result for C depends only on C and itself,
and is not dependent on regions. If we happen to evaluate the
cycle starting from C, we would never reach A, and hence the
result would be "ok".
Under the new scheme, the provisional results for C and D
are moved to the permanent cache immediately and are not affected
by the result of A.
Fixes#83538
r? `@Aaron1011`
Remove rustc_args_required_const attribute
Now that stdarch no longer needs it (thanks `@Amanieu!),` we can kill the `rustc_args_required_const` attribute. This means that lifetime extension of references to temporaries is the only remaining job that promotion is performing. :-)
r? `@oli-obk`
Fixes https://github.com/rust-lang/rust/issues/69493
This attribute will cause us to invoke evaluate on every where clause of an
invoked function and to generate an error with the result.
Without this, it is very difficult to observe the effects of invoking the trait
evaluator.
Handle more span edge cases in generics diagnostics
This should fix invalid suggestions that didn't account for empty bracket pairs (`<>`) or type bindings.
Add auto traits and clone trait migrations for RFC2229
This PR
- renames the existent RFC2229 migration `disjoint_capture_drop_reorder` to `disjoint_capture_migration`
- add additional migrations for auto traits and clone trait
Closesrust-lang/project-rfc-2229#29Closesrust-lang/project-rfc-2229#28
r? `@nikomatsakis`
