Implement rustc side of report-future-incompat
cc https://github.com/rust-lang/rust/issues/71249
This is an alternative to `@pnkfelix's` initial implementation in https://github.com/pnkfelix/rust/commits/prototype-rustc-side-of-report-future-incompat (mainly because I started working before seeing that branch 😄 ).
My approach outputs the entire original `Diagnostic`, in a way that is compatible with incremental compilation. This is not yet integrated with compiletest, but can be used manually by passing `-Z emit-future-incompat-report` to `rustc`.
Several changes are made to support this feature:
* The `librustc_session/lint` module is moved to a new crate `librustc_lint_defs` (name bikesheddable). This allows accessing lint definitions from `librustc_errors`.
* The `Lint` struct is extended with an `Option<FutureBreakage>`. When present, it indicates that we should display a lint in the future-compat report. `FutureBreakage` contains additional information that we may want to display in the report (currently, a `date` field indicating when the crate will stop compiling).
* A new variant `rustc_error::Level::Allow` is added. This is used when constructing a diagnostic for a future-breakage lint that is marked as allowed (via `#[allow]` or `--cap-lints`). This allows us to capture any future-breakage diagnostics in one place, while still discarding them before they are passed to the `Emitter`.
* `DiagnosticId::Lint` is extended with a `has_future_breakage` field, indicating whether or not the `Lint` has future breakage information (and should therefore show up in the report).
* `Session` is given access to the `LintStore` via a new `SessionLintStore` trait (since `librustc_session` cannot directly reference `LintStore` without a cyclic dependency). We use this to turn a string `DiagnosticId::Lint` back into a `Lint`, to retrieve the `FutureBreakage` data.
Currently, `FutureBreakage.date` is always set to `None`. However, this could potentially be interpreted by Cargo in the future.
I've enabled the future-breakage report for the `ARRAY_INTO_ITER` lint, which can be used to test out this PR. The intent is to use the field to allow Cargo to determine the date of future breakage (as described in [RFC 2834](https://github.com/rust-lang/rfcs/blob/master/text/2834-cargo-report-future-incompat.md)) without needing to parse the diagnostic itself.
cc `@pnkfelix`
Split out statement attributes changes from #78306
This is the same as PR https://github.com/rust-lang/rust/pull/78306, but `unused_doc_comments` is modified to explicitly ignore statement items (which preserves the current behavior).
This shouldn't have any user-visible effects, so it can be landed without lang team discussion.
---------
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
BTreeMap: refactor Entry out of map.rs into its own file
btree/map.rs is approaching the 3000 line mark, splitting out the entry
code buys about 500 lines of headroom.
I've created this PR because the changes I've made in #77438 will push `map.rs` over the 3000 line limit and cause tidy to complain.
I picked `Entry` to factor out because it feels less tightly coupled to the rest of `BTreeMap` than the various iterator implementations.
Related: #60302
The wrapper type led to tons of target.target
across the compiler. Its ptr_width field isn't
required any more, as target_pointer_width
is already present in parsed form.
Fix LitKind's byte buffer to use refcounted slice
While working on adding a new lint for clippy (see https://github.com/rust-lang/rust-clippy/pull/6044) for avoiding shared ownership of "mutable buffer" types (such as using `Rc<Vec<T>>` instead of `Rc<[T]>`), I noticed a type exported from rustc_ast and used by clippy gets caught by the lint. This PR fixes the exported type.
This PR includes the actual change to clippy too, but I will open a PR directly against clippy for that part (although it will currently fail to build there).
Allow a unique name to be assigned to dataflow graphviz output
Previously, if the same analysis were invoked multiple times in a single compilation session, the graphviz output for later runs would overwrite that of previous runs. Allow callers to add a unique identifier to each run so this can be avoided.
Stabilize some Result methods as const
Stabilize the following methods of Result as const:
- `is_ok`
- `is_err`
- `as_ref`
A test is also included, analogous to the test for `const_option`.
These methods are currently const under the unstable feature `const_result` (tracking issue: #67520).
I believe these methods to be eligible for stabilization because of the stabilization of #49146 (Allow if and match in constants) and the trivial implementations, see also: [PR#75463](https://github.com/rust-lang/rust/pull/75463) and [PR#76135](https://github.com/rust-lang/rust/pull/76135).
Note: these methods are the only methods currently under the `const_result` feature, thus this PR results in the removal of the feature.
Related: #76225
Attach tokens to all AST types used in `Nonterminal`
We perform token capturing when we have outer attributes (for nonterminals that support attributes - e.g. `Stmt`), or when we parse a `Nonterminal` for a `macro_rules!` argument. The full list of `Nonterminals` affected by this PR is:
* `NtBlock`
* `NtStmt`
* `NtTy`
* `NtMeta`
* `NtPath`
* `NtVis`
* `NtLiteral`
Of these nonterminals, only `NtStmt` and `NtLiteral` (which is actually just an `Expr`), support outer attributes - the rest only ever have token capturing perform when they match a `macro_rules!` argument.
This makes progress towards solving https://github.com/rust-lang/rust/issues/43081 - we now collect tokens for everything that might need them. However, we still need to handle `#[cfg]`, inner attributes, and misc pretty-printing issues (e.g. #75734)
I've separated the changes into (mostly) independent commits, which could be split into individual PRs for each `Nonterminal` variant. The purpose of having them all in one PR is to do a single Crater run for all of them.
Most of the changes in this PR are trivial (adding `tokens: None` everywhere we construct the various AST structs). The significant changes are:
* `ast::Visibility` is changed from `type Visibility = Spanned<VisibilityKind>` to a `struct Visibility { kind, span, tokens }`.
* `maybe_collect_tokens` is made generic, and used for both `ast::Expr` and `ast::Stmt`.
* Some of the statement-parsing functions are refactored so that we can capture the trailing semicolon.
* `Nonterminal` and `Expr` both grew by 8 bytes, as some of the structs which are stored inline (rather than behind a `P`) now have an `Option<TokenStream>` field. Hopefully the performance impact of doing this is negligible.
Add CONST_ITEM_MUTATION lint
Fixes#74053Fixes#55721
This PR adds a new lint `CONST_ITEM_MUTATION`.
Given an item `const FOO: SomeType = ..`, this lint fires on:
* Attempting to write directly to a field (`FOO.field = some_val`) or
array entry (`FOO.array_field[0] = val`)
* Taking a mutable reference to the `const` item (`&mut FOO`), including
through an autoderef `FOO.some_mut_self_method()`
The lint message explains that since each use of a constant creates a
new temporary, the original `const` item will not be modified.
We no longer lint assignments to const item fields in the
`temporary_assignment` lint, since this is now covered by the
`CONST_ITEM_MUTATION` lint.
Additionally, we `#![allow(const_item_mutation)]` in the
`borrow_interior_mutable_const.rs` test. Clippy UI tests are run with
`-D warnings`, which seems to cause builtin lints to prevent Clippy
lints from running.
Support dataflow problems on arbitrary lattices
This PR implements last of the proposed extensions I mentioned in the design meeting for the original dataflow refactor. It extends the current dataflow framework to work with arbitrary lattices, not just `BitSet`s. This is a prerequisite for dataflow-enabled MIR const-propagation. Personally, I am skeptical of the usefulness of doing const-propagation pre-monomorphization, since many useful constants only become known after monomorphization (e.g. `size_of::<T>()`) and users have a natural tendency to hand-optimize the rest. It's probably worth exprimenting with, however, and others have shown interest cc `@rust-lang/wg-mir-opt.`
The `Idx` associated type is moved from `AnalysisDomain` to `GenKillAnalysis` and replaced with an associated `Domain` type that must implement `JoinSemiLattice`. Like before, each `Analysis` defines the "bottom value" for its domain, but can no longer override the dataflow join operator. Analyses that want to use set intersection must now use the `lattice::Dual` newtype. `GenKillAnalysis` impls have an additional requirement that `Self::Domain: BorrowMut<BitSet<Self::Idx>>`, which effectively means that they must use `BitSet<Self::Idx>` or `lattice::Dual<BitSet<Self::Idx>>` as their domain.
Most of these changes were mechanical. However, because a `Domain` is no longer always a powerset of some index type, we can no longer use an `IndexVec<BasicBlock, GenKillSet<A::Idx>>>` to store cached block transfer functions. Instead, we use a boxed `dyn Fn` trait object. I discuss a few alternatives to the current approach in a commit message.
The majority of new lines of code are to preserve existing Graphviz diagrams for those unlucky enough to have to debug dataflow analyses. I find these diagrams incredibly useful when things are going wrong and considered regressing them unacceptable, especially the pretty-printing of `MovePathIndex`s, which are used in many dataflow analyses. This required a parallel `fmt` trait used only for printing dataflow domains, as well as a refactoring of the `graphviz` module now that we cannot expect the domain to be a `BitSet`. Some features did have to be removed, such as the gen/kill display mode (which I didn't use but existed to mirror the output of the old dataflow framework) and line wrapping. Since I had to rewrite much of it anyway, I took the opportunity to switch to a `Visitor` for printing dataflow state diffs instead of using cursors, which are error prone for code that must be generic over both forward and backward analyses. As a side-effect of this change, we no longer have quadratic behavior when writing graphviz diagrams for backward dataflow analyses.
r? `@pnkfelix`
This extends PR #73293 to handle patterns (Pat). Unlike expressions,
patterns do not support custom attributes, so we only need to capture
tokens during macro_rules! argument parsing.
