This also adjusts the lint docs generation to accept (and ignore) an allow
attribute, rather than expecting the documentation to be immediately followed by
the lint name.
Add `ConstraintCategory::Usage` for handling aggregate construction
In some cases, we emit borrowcheck diagnostics pointing
at a particular field expression in a struct expression
(e.g. `MyStruct { field: my_expr }`). However, this
behavior currently relies on us choosing the
`ConstraintCategory::Boring` with the 'correct' span.
When adding additional variants to `ConstraintCategory`,
(or changing existing usages away from `ConstraintCategory::Boring`),
the current behavior can easily get broken, since a non-boring
constraint will get chosen over a boring one.
To make the diagnostic output less fragile, this commit
adds a `ConstraintCategory::Usage` variant. We use this variant
for the temporary assignments created for each field of
an aggregate we are constructing.
Using this new variant, we can emit a message mentioning
"this usage", emphasizing the fact that the error message
is related to the specific use site (in the struct expression).
This is preparation for additional work on improving NLL error messages
(see #57374)
Querify `FnAbi::of_{fn_ptr,instance}` as `fn_abi_of_{fn_ptr,instance}`.
*Note: opening this PR as draft because it's based on #88499*
This more or less replicates the `LayoutOf::layout_of` setup from #88499, to replace `FnAbi::of_{fn_ptr,instance}` with `FnAbiOf::fn_abi_of_{fn_ptr,instance}`, and also route them through queries (which `layout_of` has used for a while).
The two changes at the use sites (other than the names) are:
* return type is now wrapped in `&'tcx`
* the value *is* interned, which may affect performance
* the `extra_args` list is now an interned `&'tcx ty::List<Ty<'tcx>>`
* should be cheap (it's empty for anything other than C variadics)
Theoretically, a `FnAbiOfHelpers` implementer could choose to keep the `Result<...>` instead of eagerly erroring, but the only existing users of these APIs are codegen backends, so they don't (want to) take advantage of this.
At least miri could make use of this, since it prefers propagating errors (it "just" doesn't use `FnAbi` yet - cc `@RalfJung).`
The way this is done is probably less efficient than what is possible, because the queries handle the correctness-oriented API (i.e. the split into `fn` pointers vs instances), whereas a lower-level query could end up with more reuse between different instances with identical signatures.
r? `@nagisa` cc `@oli-obk` `@bjorn3`
Gather module items after lowering.
This avoids having a non-local analysis inside lowering.
By implementing `hir_module_items` using a visitor, we make sure that iterations and visitors are consistent.
Simplify lazy DefPathHash decoding by using an on-disk hash table.
This PR simplifies the logic around mapping `DefPathHash` values encountered during incremental compilation to valid `DefId`s in the current session. It is able to do so by using an on-disk hash table encoding that allows for looking up values directly, i.e. without deserializing the entire table.
The main simplification comes from not having to keep track of `DefPathHashes` being used during the compilation session.
We now fallback type variables using the following rules:
* Construct a coercion graph `A -> B` where `A` and `B` are unresolved
type variables or the `!` type.
* Let D be those variables that are reachable from `!`.
* Let N be those variables that are reachable from a variable not in
D.
* All variables in (D \ N) fallback to `!`.
* All variables in (D & N) fallback to `()`.
Point at argument instead of call for their obligations
When an obligation is introduced by a specific `fn` argument, point at
the argument instead of the `fn` call if the obligation fails to be
fulfilled.
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
When giving an error about an obligation introduced by a function call
that an argument doesn't fulfill, and that argument is a block, add a
span_label pointing at the innermost tail expression.
Current output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:31
|
2 | let p = Some(45).and_then({
| ______________________--------_^
| | |
| | required by a bound introduced by this call
3 | | |x| println!("doubling {}", x);
4 | | Some(x * 2)
| | -----------
5 | | });
| |_____^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Previous output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:22
|
2 | let p = Some(45).and_then({
| ^^^^^^^^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Partially address #27300. Will require rebasing on top of #88546.
In some cases, we emit borrowcheck diagnostics pointing
at a particular field expression in a struct expression
(e.g. `MyStruct { field: my_expr }`). However, this
behavior currently relies on us choosing the
`ConstraintCategory::Boring` with the 'correct' span.
When adding additional variants to `ConstraintCategory`,
(or changing existing usages away from `ConstraintCategory::Boring`),
the current behavior can easily get broken, since a non-boring
constraint will get chosen over a boring one.
To make the diagnostic output less fragile, this commit
adds a `ConstraintCategory::Usage` variant. We use this variant
for the temporary assignments created for each field of
an aggregate we are constructing.
Using this new variant, we can emit a message mentioning
"this usage", emphasizing the fact that the error message
is related to the specific use site (in the struct expression).
This is preparation for additional work on improving NLL error messages
(see #57374)
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
Const drop
The changes are pretty primitive at this point. But at least it works. ^-^
Problems with the current change that I can think of now:
- [x] `~const Drop` shouldn't change anything in the non-const world.
- [x] types that do not have drop glues shouldn't fail to satisfy `~const Drop` in const contexts. `struct S { a: u8, b: u16 }` This might not fail for `needs_non_const_drop`, but it will fail in `rustc_trait_selection`.
- [x] The current change accepts types that have `const Drop` impls but have non-const `Drop` glue.
Fixes#88424.
Significant Changes:
- `~const Drop` is no longer treated as a normal trait bound. In non-const contexts, this bound has no effect, but in const contexts, this restricts the input type and all of its transitive fields to either a) have a `const Drop` impl or b) can be trivially dropped (i.e. no drop glue)
- `T: ~const Drop` will not be linted like `T: Drop`.
- Instead of recursing and iterating through the type in `rustc_mir::transform::check_consts`, we use the trait system to special case `~const Drop`. See [`rustc_trait_selection::...::candidate_assembly#assemble_const_drop_candidates`](https://github.com/fee1-dead/rust/blob/const-drop/compiler/rustc_trait_selection/src/traits/select/candidate_assembly.rs#L817) and others.
Changes not related to `const Drop`ping and/or changes that are insignificant:
- `Node.constness_for_typeck` no longer returns `hir::Constness::Const` for type aliases in traits. This was previously used to hack how we determine default bound constness for items. But because we now use an explicit opt-in, it is no longer needed.
- Removed `is_const_impl_raw` query. We have `impl_constness`, and the only existing use of that query uses `HirId`, which means we can just operate it with hir.
- `ty::Destructor` now has a field `constness`, which represents the constness of the destructor.
r? `@oli-obk`
This encoding allows for random access without an expensive upfront decoding
state which in turn allows simplifying the DefPathIndex lookup logic without
regressing performance.
Introduce NullOp::AlignOf
This PR introduces `Rvalue::NullaryOp(NullOp::AlignOf, ty)`, which will be lowered from `align_of`, similar to `size_of` lowering to `Rvalue::NullaryOp(NullOp::SizeOf, ty)`.
The changes are originally part of #88700 but since it's not dependent on other changes and could have performance impact on its own, it's separated into its own PR.
Add -Z panic-in-drop={unwind,abort} command-line option
This PR changes `Drop` to abort if an unwinding panic attempts to escape it, making the process abort instead. This has several benefits:
- The current behavior when unwinding out of `Drop` is very unintuitive and easy to miss: unwinding continues, but the remaining drops in scope are simply leaked.
- A lot of unsafe code doesn't expect drops to unwind, which can lead to unsoundness:
- https://github.com/servo/rust-smallvec/issues/14
- https://github.com/bluss/arrayvec/issues/3
- There is a code size and compilation time cost to this: LLVM needs to generate extra landing pads out of all calls in a drop implementation. This can compound when functions are inlined since unwinding will then continue on to process drops in the callee, which can itself unwind, etc.
- Initial measurements show a 3% size reduction and up to 10% compilation time reduction on some crates (`syn`).
One thing to note about `-Z panic-in-drop=abort` is that *all* crates must be built with this option for it to be sound since it makes the compiler assume that dropping `Box<dyn Any>` will never unwind.
cc https://github.com/rust-lang/lang-team/issues/97
generic_const_exprs: use thir for abstract consts instead of mir
Changes `AbstractConst` building to use `thir` instead of `mir` so that there's less chance of consts unifying when they shouldn't because lowering to mir dropped information (see `abstract-consts-as-cast-5.rs` test)
r? `@lcnr`
Encode spans relative to the enclosing item
The aim of this PR is to avoid recomputing queries when code is moved without modification.
MCP at https://github.com/rust-lang/compiler-team/issues/443
This is achieved by :
1. storing the HIR owner LocalDefId information inside the span;
2. encoding and decoding spans relative to the enclosing item in the incremental on-disk cache;
3. marking a dependency to the `source_span(LocalDefId)` query when we translate a span from the short (`Span`) representation to its explicit (`SpanData`) representation.
Since all client code uses `Span`, step 3 ensures that all manipulations
of span byte positions actually create the dependency edge between
the caller and the `source_span(LocalDefId)`.
This query return the actual absolute span of the parent item.
As a consequence, any source code motion that changes the absolute byte position of a node will either:
- modify the distance to the parent's beginning, so change the relative span's hash;
- dirty `source_span`, and trigger the incremental recomputation of all code that
depends on the span's absolute byte position.
With this scheme, I believe the dependency tracking to be accurate.
For the moment, the spans are marked during lowering.
I'd rather do this during def-collection,
but the AST MutVisitor is not practical enough just yet.
The only difference is that we attach macro-expanded spans
to their expansion point instead of the macro itself.
Change more x64 size checks to not apply to x32.
Commit 95e096d6 changed a bunch of size checks already, but more have
been added, so this fixes the new ones the same way: the various size
checks that are conditional on target_arch = "x86_64" were not intended
to apply to x86_64-unknown-linux-gnux32, so add
target_pointer_width = "64" to the conditions.
Now that we encode spans relative to the items, the item's own span is
never actually hashed as part of the HIR.
In consequence, we explicitly include it in the crate hash to avoid
missing cross-crate invalidations.
Split rustc_mir
The `rustc_mir` crate is the second largest in the compiler.
This PR splits it up into 5 crates:
- rustc_borrowck;
- rustc_const_eval;
- rustc_mir_dataflow;
- rustc_mir_transform;
- rustc_monomorphize.
Mmap the incremental data instead of reading it.
Instead of reading the full incremental state using `fs::read_file`, we memmap it using a private read-only file-backed map.
This allows the system to reclaim any memory we are not using, while ensuring we are not polluted by
outside modifications to the file.
Suggested in https://github.com/rust-lang/rust/pull/83036#issuecomment-800458082 by `@bjorn3`
Avoid invoking the hir_crate query to traverse the HIR
Walking the HIR tree is done using the `hir_crate` query. However, this is unnecessary, since `hir_owner(CRATE_DEF_ID)` provides the same information. Since depending on `hir_crate` forces dependents to always be executed, this leads to unnecessary work.
By splitting HIR and attributes visits, we can avoid an edge to `hir_crate` when trying to visit the HIR tree.
Stop allocating vtable entries for non-object-safe methods
Current a vtable entry is allocated for all associated fns, even if the method is not object-safe: https://godbolt.org/z/h7vx6f35T
As a result, each vtable for `Iterator`' currently consumes 74 `usize`s. This PR stops allocating vtable entries for those methods, reducing vtable size of each `Iterator` vtable to 7 `usize`s.
Note that this PR introduces will cause more invocations of `is_vtable_safe_method`. So a perf run might be needed. If result isn't favorable then we might need to query-ify `is_vtable_safe_method`.
Provide `layout_of` automatically (given tcx + param_env + error handling).
After #88337, there's no longer any uses of `LayoutOf` within `rustc_target` itself, so I realized I could move the trait to `rustc_middle::ty::layout` and redesign it a bit.
This is similar to #88338 (and supersedes it), but at no ergonomic loss, since there's no funky `C: LayoutOf<Ty = Ty>` -> `Ty: TyAbiInterface<C>` generic `impl` chain, and each `LayoutOf` still corresponds to one `impl` (of `LayoutOfHelpers`) for the specific context.
After this PR, this is what's needed to get `trait LayoutOf` (with the `layout_of` method) implemented on some context type:
* `TyCtxt`, via `HasTyCtxt`
* `ParamEnv`, via `HasParamEnv`
* a way to transform `LayoutError`s into the desired error type
* an error type of `!` can be paired with having `cx.layout_of(...)` return `TyAndLayout` *without* `Result<...>` around it, such as used by codegen
* this is done through a new `LayoutOfHelpers` trait (and so is specifying the type of `cx.layout_of(...)`)
When going through this path (and not bypassing it with a manual `impl` of `LayoutOf`), the end result is that only the error case can be customized, the query itself and the success paths are guaranteed to be uniform.
(**EDIT**: just noticed that because of the supertrait relationship, you cannot actually implement `LayoutOf` yourself, the blanket `impl` fully covers all possible context types that could ever implement it)
Part of the motivation for this shape of API is that I've been working on querifying `FnAbi::of_*`, and what I want/need to introduce for that looks a lot like the setup in this PR - in particular, it's harder to express the `FnAbi` methods in `rustc_target`, since they're much more tied to `rustc` concepts.
r? `@nagisa` cc `@oli-obk` `@bjorn3`
Commit 95e096d6 changed a bunch of size checks already, but more have
been added, so this fixes the new ones the same way: the various size
checks that are conditional on target_arch = "x86_64" were not intended
to apply to x86_64-unknown-linux-gnux32, so add
target_pointer_width = "64" to the conditions.
Fix drop handling for `if let` expressions
MIR lowering for `if let` expressions is now more complicated now that
`if let` exists in HIR. This PR adds a scope for the variables bound in
an `if let` expression and then uses an approach similar to how we
handle loops to ensure that we reliably drop the correct variables.
Closes#88307
cc `@flip1995` `@richkadel` `@c410-f3r`
MIR lowering for `if let` expressions is now more complicated now that
`if let` exists in HIR. This PR adds a scope for the variables bound in
an `if let` expression and then uses an approach similar to how we
handle loops to ensure that we reliably drop the correct variables.
Introduce `let...else`
Tracking issue: #87335
The trickiest part for me was enforcing the diverging else block with clear diagnostics. Perhaps the obvious solution is to expand to `let _: ! = ..`, but I decided against this because, when a "mismatched type" error is found in typeck, there is no way to trace where in the HIR the expected type originated, AFAICT. In order to pass down this information, I believe we should introduce `Expectation::LetElseNever(HirId)` or maybe add `HirId` to `Expectation::HasType`, but I left that as a future enhancement. For now, I simply assert that the block is `!` with a custom `ObligationCauseCode`, and I think this is clear enough, at least to start. The downside here is that the error points at the entire block rather than the specific expression with the wrong type. I left a todo to this effect.
Overall, I believe this PR is feature-complete with regard to the RFC.
rustc_target: `TyAndLayout::field` should never error.
This refactor (making `TyAndLayout::field` return `TyAndLayout` without any `Result` around it) is based on a simple observation, regarding `TyAndLayout::field`:
If `cx.layout_of(ty)` succeeds (for some `cx` and `ty`), then `.field(cx, i)` on the resulting `TyAndLayout` should *always* succeed in computing `cx.layout_of(field_ty)` (where `field_ty` is the type of the `i`th field of `ty`).
The reason for this is that no matter which field is chosen, `cx.layout_of(field_ty)` *will have already been computed*, as part of computing `cx.layout_of(ty)`, as we cannot determine the layout of *any* type without considering the layouts of *all* of its fields.
And so it should be fine to turn any errors into ICEs, since they likely indicate a `cx` mismatch, or some other edge case that is due to a compiler bug (as opposed to ever being an user-facing error).
<hr/>
Each commit should probably be reviewed separately, though note that there's some `where` clauses (in `rustc_target::abi::call::*`) that change in most commits.
cc `@nagisa` `@oli-obk`
Introduce `~const`
- [x] Removed `?const` and change uses of `?const`
- [x] Added `~const` to the AST. It is gated behind const_trait_impl.
- [x] Validate `~const` in ast_validation.
- [x] Update UI Tests
- [x] Add enum `BoundConstness` (With variants `NotConst` and
`ConstIfConst` allowing future extensions)
- [x] Adjust trait selection and pre-existing code to use `BoundConstness`.
- [ ] Optional steps for this PR
- [x] Fix#88155
- [x] ~~Do something with constness bounds in chalk~~ Must be done to rust-lang/chalk (just tried to refactor, there are a lot of errors to resolve :( )
- [ ] Adjust Error messages for `~const` bounds that can't be satisfied.
r? `@oli-obk`
`#[inline]` non-generic `pub fn`s in `rustc_target::abi` and `ty::layout`.
Mostly doing this as a perf curiosity, having spotted that `#[inline]` usage is a bit spotty.
- [x] Removed `?const` and change uses of `?const`
- [x] Added `~const` to the AST. It is gated behind const_trait_impl.
- [x] Validate `~const` in ast_validation.
- [ ] Add enum `BoundConstness` to the HIR. (With variants `NotConst` and
`ConstIfConst` allowing future extensions)
- [ ] Adjust trait selection and pre-existing code to use `BoundConstness`.
- [ ] Optional steps (*for this PR, obviously*)
- [ ] Fix#88155
- [ ] Do something with constness bounds in chalk
lazily "compute" anon const default substs
Continuing the work of #83086, this implements the discussed solution for the [unused substs problem](https://github.com/rust-lang/project-const-generics/blob/master/design-docs/anon-const-substs.md#unused-substs). As of now, anonymous constants inherit all of their parents generics, even if they do not use them, e.g. in `fn foo<T, const N: usize>() -> [T; N + 1]`, the array length has `T` as a generic parameter even though it doesn't use it. These *unused substs* cause some backwards incompatible, and imo incorrect behavior, e.g. #78369.
---
We do not actually filter any generic parameters here and the `default_anon_const_substs` query still a dummy which only checks that
- we now prevent the previously existing query cycles and are able to call `predicates_of(parent)` when computing the substs of anonymous constants
- the default anon consts substs only include the typeflags we assume it does.
Implementing that filtering will be left as future work.
---
The idea of this PR is to delay the creation of the anon const substs until after we've computed `predicates_of` for the parent of the anon const. As the predicates of the parent can however contain the anon const we still have to create a `ty::Const` for it.
We do this by changing the substs field of `ty::Unevaluated` to an option and modifying accesses to instead call the method `unevaluated.substs(tcx)` which returns the substs as before. If the substs - now `substs_` - of `ty::Unevaluated` are `None`, it means that the anon const currently has its default substs, i.e. the substs it has when first constructed, which are the generic parameters it has available. To be able to call `unevaluated.substs(tcx)` in a `TypeVisitor`, we add the non-defaulted method `fn tcx_for_anon_const_substs(&self) -> Option<TyCtxt<'tcx>>`. In case `tcx_for_anon_const_substs` returns `None`, unknown anon const default substs are skipped entirely.
Even when `substs_` is `None` we still have to treat the constant as if it has its default substs. To do this, `TypeFlags` are modified so that it is clear whether they can still change when *exposing* any anon const default substs. A new flag, `HAS_UNKNOWN_DEFAULT_CONST_SUBSTS`, is added in case some default flags are missing.
The rest of this PR are some smaller changes to either not cause cycles by trying to access the default anon const substs too early or to be able to access the `tcx` in previously unused locations.
cc `@rust-lang/project-const-generics`
r? `@nikomatsakis`
Morph `layout_raw` query into `layout_of`.
Before this PR, `LayoutCx::layout_of` wrapped the `layout_raw` query, to:
* normalize the type, before attempting to compute the layout
* pass the layout to `record_layout_for_printing`, for `-Zprint-type-sizes`
Moving those two responsibilities into the query may reduce overhead (due to cached calls skipping those steps), but I want to do a perf run to know.
One of the changes I had to make was changing the return type of the query, to be able to both get out the type produced by normalizing inside the query *and* to match the signature of the old `TyCtxt::layout_of`. This change may be worse, perf-wise, so that's another reason I want to check.
r? `@nagisa` cc `@oli-obk`
Use undef for uninitialized bytes in constants
Fixes#83657
This generates good code when the const is fully uninit, e.g.
```rust
#[no_mangle]
pub const fn fully_uninit() -> MaybeUninit<[u8; 10]> {
const M: MaybeUninit<[u8; 10]> = MaybeUninit::uninit();
M
}
```
generates
```asm
fully_uninit:
ret
```
as you would expect.
There is no improvement, however, when it's partially uninit, e.g.
```rust
pub struct PartiallyUninit {
x: u64,
y: MaybeUninit<[u8; 10]>
}
#[no_mangle]
pub const fn partially_uninit() -> PartiallyUninit {
const X: PartiallyUninit = PartiallyUninit { x: 0xdeadbeefcafe, y: MaybeUninit::uninit() };
X
}
```
generates
```asm
partially_uninit:
mov rax, rdi
mov rcx, qword ptr [rip + .L__unnamed_1+16]
mov qword ptr [rdi + 16], rcx
movups xmm0, xmmword ptr [rip + .L__unnamed_1]
movups xmmword ptr [rdi], xmm0
ret
.L__unnamed_1:
.asciz "\376\312\357\276\255\336\000"
.zero 16
.size .L__unnamed_1, 24
```
which copies a bunch of zeros in place of the undef bytes, the same as before this change.
Edit: generating partially-undef constants isn't viable at the moment anyways due to #84565, so it's disabled
Use if-let guards in the codebase and various other pattern cleanups
Dogfooding if-let guards as experimentation for the feature.
Tracking issue #51114. Conflicts with #87937.
Normalize projections under binders
Fixes#70243Fixes#70120Fixes#62529Fixes#87219
Issues to followup on after (probably fixed, but no test added here):
#76956#56556#79207#85636
r? `@nikomatsakis`
Use custom wrap-around type instead of RangeInclusive
Two reasons:
1. More memory is allocated than necessary for `valid_range` in `Scalar`. The range is not used as an iterator and `exhausted` is never used.
2. `contains`, `count` etc. methods in `RangeInclusive` are doing very unhelpful(and dangerous!) things when used as a wrap-around range. - In general this PR wants to limit potentially confusing methods, that have a low probability of working.
Doing a local perf run, every metric shows improvement except for instructions.
Max-rss seem to have a very consistent improvement.
Sorry - newbie here, probably doing something wrong.
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Trait upcasting coercion (part 3)
By using separate candidates for each possible choice, this fixes type-checking issues in previous commits.
r? `@nikomatsakis`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Refactor fallback code to prepare for never type
This PR contains cherry-picks of some of `@nikomatsakis's` work from #79366, and shouldn't (AFAICT) represent any change in behavior. However, the refactoring is good regardless of the never type work being landed, and will reduce the size of those eventual PR(s) (and rebase pain).
I am not personally an expert on this code, and the commits are essentially 100% `@nikomatsakis's,` but they do seem reasonable to me by my understanding. Happy to edit with review, of course. Commits are best reviewed in sequence rather than all together.
r? `@jackh726` perhaps?
Remove box syntax from compiler and tools
Removes box syntax from the compiler and tools. In #49733, the future of box syntax is uncertain and the use in the compiler was listed as one of the reasons to keep it. Removal of box syntax [might affect the code generated](https://github.com/rust-lang/rust/pull/49646#issuecomment-379219615) and slow down the compiler so I'd recommend doing a perf run on this.
Update `polonius-engine` to 0.13.0
This PR updates the use of `polonius-engine` to the recently released 0.13.0:
- this version renamed a lot of relations to match the current terminology
- "illegal subset relationships errors" (AKA "subset errors" or "universal region errors" in rustc parlance) have been implemented in all variants, and therefore the `Hybrid` variant can be the rustc default once again
- some of the blessed expectations were updated: new tests have been added since the last time I updated the tests, diagnostics have changed, etc.
In particular:
- a few tests had trivial expectations changes such as basic diagnostics changes for the migrate-mode and full NLLs
- others were recursion and lengths limits which emits a file, and under the polonius compare-mode, the folder has a different name
- a few tests were ignored in the NLL compare-mode for reasons that obviously also apply to Polonius
- some diagnostics were unified so that older expectations no longer made sense: the NLL and Polonius outputs were identical.
- in a few cases Polonius gets a chance to emit more errors than NLLs
A few tests in the compare-mode still are super slow and trigger the 60s warning, or OOM rustc during fact generation, and I've detailed these [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/186049-t-compiler.2Fwg-polonius/topic/Challenges.20for.20move.2Finit.2C.20liveness.2C.20and.20.60Location.3A.3AAll.60):
- `src/test/ui/numbers-arithmetic/saturating-float-casts.rs` -> OOM during rustc fact generation
- `src/test/ui/numbers-arithmetic/num-wrapping.rs`
- `src/test/ui/issues/issue-72933-match-stack-overflow.rs`
- `src/test/ui/issues/issue-74564-if-expr-stack-overflow.rs`
- `src/test/ui/repr/repr-no-niche.rs`
In addition, 2 tests don't currently pass and I didn't want to bless them now: they deal with HRTBs and miss errors that NLLs emit. We're currently trying to see if we need chalk to deal with HRTB errors (as we thought we would have to) but during the recent sprint, we discovered that we may be able to detect some of these errors in a way that resembles subset errors:
- `ui/hrtb/hrtb-just-for-static.rs` -> 3 errors in NLL, 2 in polonius: a missing error about HRTB + needing to outlive 'static
- `ui/issues/issue-26217.rs` -> missing HRTB that makes the test compile instead of emitting an error
We'll keep talking about this at the next sprint as well.
cc `@rust-lang/wg-polonius` r? `@nikomatsakis`
Try filtering out non-const impls when we expect const impls
**TL;DR**: Associated types on const impls are now bounded; we now disallow calling a const function with bounds when the specified type param only has a non-const impl.
r? `@oli-obk`
Name the captured upvars for closures/generators in debuginfo
Previously, debuggers print closures as something like
```
y::main::closure-0 (0x7fffffffdd34)
```
The pointer actually references to an upvar. It is not very obvious, especially for beginners.
It's because upvars don't have names before, as they are packed into a tuple. This PR names the upvars, so we can expect to see something like
```
y::main::closure-0 {_captured_ref__b: 0x[...]}
```
r? `@tmandry`
Discussed at https://github.com/rust-lang/rust/pull/84752#issuecomment-831639489 .
Add c_enum_min_bits target spec field, use for arm-none and thumb-none targets
Fixes https://github.com/rust-lang/rust/issues/87917
<s>Haven't tested this yet, still playing around.</s>
This seems to fix the issue.
