Currently, the rustc_macros::symbols macro generates two
`macro_rules!` macros as its output. These two macros are
used in rustc_span/src/symbol.rs.
This means that each Symbol that we define is represented
in the AST of rustc_symbols twice: once in the definition
of the `define_symbols!` macro (similarly for the
`keywords! macro), and once in the rustc_span::symbols
definition.
That would be OK if there were only a handful of symbols,
but currently we define over 1100 symbols. The definition
of the `define_symbols!` macro contains the expanded definition
of each symbol, so that's a lot of AST storage wasted on a
macro that is used exactly once.
This commit removes the `define_symbols` macro, and simply
allows the proc macro to directly generate the
`rustc_symbols::symbol::sym` module.
The benefit is mainly in reducing memory wasted during
compilation of rustc itself. It should also reduce memory used
by Rust Analyzer.
This commit also reduces the size of the AST for symbol
definitions, by moving two `#[allow(...)]` attributes from
the symbol constants to the `sym` module. This eliminates 2200+
attribute nodes.
This commit also eliminates the need for the `digits_array`
constant. There's no need to store an array of Symbol values
for digits. We can simply define a constant of the base value,
and add to that base value.
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
Gives a performance increase over calling byte_pos_to_line_and_col
twice, partially because it decreases the function calling overhead,
potentially because it doesn't populate the line cache with lines that
turn out to belong to invalid spans, and likely because of some other
incidental improvements made possible by having more context available.
Fix some clippy lints
Happy to revert these if you think they're less readable, but personally I like them better now (especially the `else { if { ... } }` to `else if { ... }` change).
Extend doc keyword feature by allowing any ident
Part of #51315.
As suggested by ``@danielhenrymantilla`` in [this comment](https://github.com/rust-lang/rust/issues/51315#issuecomment-733879934), this PR extends `#[doc(keyword = "...")]` to allow any ident to be used as keyword. The final goal is to allow (proc-)macro crates' owners to write documentation of the keywords they might introduce.
r? ``@jyn514``
Move lev_distance to rustc_ast, make non-generic
rustc_ast currently has a few dependencies on rustc_lexer. Ideally, an AST
would not have any dependency its lexer, for minimizing
design-time dependencies. Breaking this dependency would also have practical
benefits, since modifying rustc_lexer would not trigger a rebuild of rustc_ast.
This commit does not remove the rustc_ast --> rustc_lexer dependency,
but it does remove one of the sources of this dependency, which is the
code that handles fuzzy matching between symbol names for making suggestions
in diagnostics. Since that code depends only on Symbol, it is easy to move
it to rustc_span. It might even be best to move it to a separate crate,
since other tools such as Cargo use the same algorithm, and have simply
contain a duplicate of the code.
This changes the signature of find_best_match_for_name so that it is no
longer generic over its input. I checked the optimized binaries, and this
function was duplicated for nearly every call site, because most call sites
used short-lived iterator chains, generic over Map and such. But there's
no good reason for a function like this to be generic, since all it does
is immediately convert the generic input (the Iterator impl) to a concrete
Vec<Symbol>. This has all of the costs of generics (duplicated method bodies)
with no benefit.
Changing find_best_match_for_name to be non-generic removed about 10KB of
code from the optimized binary. I know it's a drop in the bucket, but we have
to start reducing binary size, and beginning to tame over-use of generics
is part of that.
rustc_ast currently has a few dependencies on rustc_lexer. Ideally, an AST
would not have any dependency its lexer, for minimizing unnecessarily
design-time dependencies. Breaking this dependency would also have practical
benefits, since modifying rustc_lexer would not trigger a rebuild of rustc_ast.
This commit does not remove the rustc_ast --> rustc_lexer dependency,
but it does remove one of the sources of this dependency, which is the
code that handles fuzzy matching between symbol names for making suggestions
in diagnostics. Since that code depends only on Symbol, it is easy to move
it to rustc_span. It might even be best to move it to a separate crate,
since other tools such as Cargo use the same algorithm, and have simply
contain a duplicate of the code.
This changes the signature of find_best_match_for_name so that it is no
longer generic over its input. I checked the optimized binaries, and this
function was duplicated at nearly every call site, because most call sites
used short-lived iterator chains, generic over Map and such. But there's
no good reason for a function like this to be generic, since all it does
is immediately convert the generic input (the Iterator impl) to a concrete
Vec<Symbol>. This has all of the costs of generics (duplicated method bodies)
with no benefit.
Changing find_best_match_for_name to be non-generic removed about 10KB of
code from the optimized binary. I know it's a drop in the bucket, but we have
to start reducing binary size, and beginning to tame over-use of generics
is part of that.
They were originally called "opt-in, built-in traits" (OIBITs), but
people realized that the name was too confusing and a mouthful, and so
they were renamed to just "auto traits". The feature flag's name wasn't
updated, though, so that's what this PR does.
There are some other spots in the compiler that still refer to OIBITs,
but I don't think changing those now is worth it since they are internal
and not particularly relevant to this PR.
Also see <https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/opt-in.2C.20built-in.20traits.20(auto.20traits).20feature.20name>.
RFC-2229: Implement Precise Capture Analysis
### This PR introduces
- Feature gate for RFC-2229 (incomplete) `capture_disjoint_field`
- Rustc Attribute to print out the capture analysis `rustc_capture_analysis`
- Precise capture analysis
### Description of the analysis
1. If the feature gate is not set then all variables that are not local to the closure will be added to the list of captures. (This is for backcompat)
2. The rest of the analysis is based entirely on how the captured `Place`s are used within the closure. Precise information (i.e. projections) about the `Place` is maintained throughout.
3. To reduce the amount of information we need to keep track of, we do a minimization step. In this step, we determine a list such that no Place within this list represents an ancestor path to another entry in the list. Check rust-lang/project-rfc-2229#9 for more detailed examples.
4. To keep the compiler functional as before we implement a Bridge between the results of this new analysis to existing data structures used for closure captures. Note the new capture analysis results are only part of MaybeTypeckTables that is the information is only available during typeck-ing.
### Known issues
- Statements like `let _ = x` will make the compiler ICE when used within a closure with the feature enabled. More generally speaking the issue is caused by `let` statements that create no bindings and are init'ed using a Place expression.
### Testing
We removed the code that would handle the case where the feature gate is not set, to enable the feature as default and did a bors try and perf run. More information here: #78762
### Thanks
This has been slowly in the works for a while now.
I want to call out `@Azhng` `@ChrisPardy` `@null-sleep` `@jenniferwills` `@logmosier` `@roxelo` for working on this and the previous PRs that led up to this, `@nikomatsakis` for guiding us.
Closesrust-lang/project-rfc-2229#7Closesrust-lang/project-rfc-2229#9Closesrust-lang/project-rfc-2229#6Closesrust-lang/project-rfc-2229#19
r? `@nikomatsakis`
incr-comp: hash and serialize span end line/column
Hash both the length and the end location (line/column) of a span. If we
hash only the length, for example, then two otherwise equal spans with
different end locations will have the same hash. This can cause a
problem during incremental compilation wherein a previous result for a
query that depends on the end location of a span will be incorrectly
reused when the end location of the span it depends on has changed. A
similar analysis applies if some query depends specifically on the
length of the span, but we only hash the end location. So hash both.
Fix#46744, fix#59954, fix#63161, fix#73640, fix#73967, fix#74890, fix#75900
---
See #74890 for a more in-depth analysis.
I haven't thought about what other problems this root cause could be responsible for. Please let me know if anything springs to mind. I believe the issue has existed since the inception of incremental compilation.
Implement destructuring assignment for tuples
This is the first step towards implementing destructuring assignment (RFC: https://github.com/rust-lang/rfcs/pull/2909, tracking issue: #71126). This PR is the first part of #71156, which was split up to allow for easier review.
Quick summary: This change allows destructuring the LHS of an assignment if it's a (possibly nested) tuple.
It is implemented via a desugaring (AST -> HIR lowering) as follows:
```rust
(a,b) = (1,2)
```
... becomes ...
```rust
{
let (lhs0,lhs1) = (1,2);
a = lhs0;
b = lhs1;
}
```
Thanks to `@varkor` who helped with the implementation, particularly around default binding modes.
r? `@petrochenkov`
Hash both the length and the end location (line/column) of a span. If we
hash only the length, for example, then two otherwise equal spans with
different end locations will have the same hash. This can cause a
problem during incremental compilation wherein a previous result for a
query that depends on the end location of a span will be incorrectly
reused when the end location of the span it depends on has changed. A
similar analysis applies if some query depends specifically on the
length of the span, but we only hash the end location. So hash both.
Fix#46744, fix#59954, fix#63161, fix#73640, fix#73967, fix#74890, fix#75900
Add support for SHA256 source file hashing
Adds support for `-Z src-hash-algorithm sha256`, which became available in LLVM 11.
Using an older version of LLVM will cause an error `invalid checksum kind` if the hash algorithm is set to sha256.
r? `@eddyb`
cc #70401 `@est31`
Properly handle lint spans after MIR inlining
The first commit shows what happens when we apply mir inlining and then cause lints on the inlined MIR.
The second commit fixes that.
r? `@wesleywiser`
Avoid BorrowMutError with RUSTC_LOG=debug
```console
$ touch empty.rs
$ env RUSTC_LOG=debug rustc +stage1 --crate-type=lib empty.rs
```
Fails with a `BorrowMutError` because source map files are already
borrowed while `features_query` attempts to format a log message
containing a span.
Release the borrow before the query to avoid the issue.
rustc_span: improve bounds checks in byte_pos_to_line_and_col
The effect of this change is to consider edge-case spans that start or
end at the position one past the end of a file to be valid during span
hashing and encoding. This change means that these spans will be
preserved across incremental compilation sessions when they are part of
a serialized query result, instead of causing the dummy span to be used.
Separate unsized locals
Closes#71694
Takes over again #72029 and #74971
cc @RalfJung @oli-obk @pnkfelix @eddyb as they've participated in previous reviews of this PR.
Uplift `temporary-cstring-as-ptr` lint from `clippy` into rustc
The general consensus seems to be that this lint covers a common enough mistake to warrant inclusion in rustc.
The diagnostic message might need some tweaking, as I'm not sure the use of second-person perspective matches the rest of rustc, but I'd like to hear others' thoughts on that.
(cc #53224).
r? `@oli-obk`
The lint checks arguments in calls to `transmute` or functions that have
`Pointer` as a trait bound and displays a warning if the argument is a function
reference. Also checks for `std::fmt::Pointer::fmt` to handle formatting macros
although it doesn't depend on the exact expansion of the macro or formatting
internals. `std::fmt::Pointer` and `std::fmt::Pointer::fmt` were also added as
diagnostic items and symbols.
Add compiler support for LLVM's x86_64 ERMSB feature
This change is needed for compiler-builtins to check for this feature
when implementing memcpy/memset. See:
https://github.com/rust-lang/compiler-builtins/pull/365
Without this change, the following code compiles, but does nothing:
```rust
#[cfg(target_feature = "ermsb")]
pub unsafe fn ermsb_memcpy() { ... }
```
The change just does compile-time detection. I think that runtime
detection will have to come in a follow-up CL to std-detect.
Like all the CPU feature flags, this just references #44839
Signed-off-by: Joe Richey <joerichey@google.com>
The effect of this change is to consider edge-case spans that start or
end at the position one past the end of a file to be valid during span
hashing and encoding. This change means that these spans will be
preserved across incremental compilation sessions when they are part of
a serialized query result, instead of causing the dummy span to be used.
This change is needed for compiler-builtins to check for this feature
when implementing memcpy/memset. See:
https://github.com/rust-lang/compiler-builtins/pull/365
The change just does compile-time detection. I think that runtime
detection will have to come in a follow-up CL to std-detect.
Like all the CPU feature flags, this just references #44839
Signed-off-by: Joe Richey <joerichey@google.com>
replace `#[allow_internal_unstable]` with `#[rustc_allow_const_fn_unstable]` for `const fn`s
`#[allow_internal_unstable]` is currently used to side-step feature gate and stability checks.
While it was originally only meant to be used only on macros, its use was expanded to `const fn`s.
This pr adds stricter checks for the usage of `#[allow_internal_unstable]` (only on macros) and introduces the `#[rustc_allow_const_fn_unstable]` attribute for usage on `const fn`s.
This pr does not change any of the functionality associated with the use of `#[allow_internal_unstable]` on macros or the usage of `#[rustc_allow_const_fn_unstable]` (instead of `#[allow_internal_unstable]`) on `const fn`s (see https://github.com/rust-lang/rust/issues/69399#issuecomment-712911540).
Note: The check for `#[rustc_allow_const_fn_unstable]` currently only validates that the attribute is used on a function, because I don't know how I would check if the function is a `const fn` at the place of the check. I therefore openend this as a 'draft pull request'.
Closesrust-lang/rust#69399
r? @oli-obk
allow_internal_unstable is currently used
to side-step feature gate and stability checks.
While it was originally only meant to be used
only on macros, its use was expanded to
const functions.
This commit prepares stricter checks for the usage of allow_internal_unstable (only on macros)
and introduces the rustc_allow_const_fn_unstable attribute for usage on functions.
See rust-lang/rust#69399
Remove unused code
Rustc has a builtin lint for detecting unused code inside a crate, but when an item is marked `pub`, the code, even if unused inside the entire workspace, is never marked as such. Therefore, I've built [warnalyzer](https://github.com/est31/warnalyzer) to detect unused items in a cross-crate setting.
Closes https://github.com/est31/warnalyzer/issues/2
Give `impl Trait` in a `const fn` its own feature gate
...previously it was gated under `#![feature(const_fn)]`.
I think we actually want to do this in all const-contexts? If so, this should be `#![feature(const_impl_trait)]` instead. I don't think there's any way to make use of `impl Trait` within a `const` initializer.
cc #77463
r? `@oli-obk`
This is a combination of 18 commits.
Commit #2:
Additional examples and some small improvements.
Commit #3:
fixed mir-opt non-mir extensions and spanview title elements
Corrected a fairly recent assumption in runtest.rs that all MIR dump
files end in .mir. (It was appending .mir to the graphviz .dot and
spanview .html file names when generating blessed output files. That
also left outdated files in the baseline alongside the files with the
incorrect names, which I've now removed.)
Updated spanview HTML title elements to match their content, replacing a
hardcoded and incorrect name that was left in accidentally when
originally submitted.
Commit #4:
added more test examples
also improved Makefiles with support for non-zero exit status and to
force validation of tests unless a specific test overrides it with a
specific comment.
Commit #5:
Fixed rare issues after testing on real-world crate
Commit #6:
Addressed PR feedback, and removed temporary -Zexperimental-coverage
-Zinstrument-coverage once again supports the latest capabilities of
LLVM instrprof coverage instrumentation.
Also fixed a bug in spanview.
Commit #7:
Fix closure handling, add tests for closures and inner items
And cleaned up other tests for consistency, and to make it more clear
where spans start/end by breaking up lines.
Commit #8:
renamed "typical" test results "expected"
Now that the `llvm-cov show` tests are improved to normally expect
matching actuals, and to allow individual tests to override that
expectation.
Commit #9:
test coverage of inline generic struct function
Commit #10:
Addressed review feedback
* Removed unnecessary Unreachable filter.
* Replaced a match wildcard with remining variants.
* Added more comments to help clarify the role of successors() in the
CFG traversal
Commit #11:
refactoring based on feedback
* refactored `fn coverage_spans()`.
* changed the way I expand an empty coverage span to improve performance
* fixed a typo that I had accidently left in, in visit.rs
Commit #12:
Optimized use of SourceMap and SourceFile
Commit #13:
Fixed a regression, and synched with upstream
Some generated test file names changed due to some new change upstream.
Commit #14:
Stripping out crate disambiguators from demangled names
These can vary depending on the test platform.
Commit #15:
Ignore llvm-cov show diff on test with generics, expand IO error message
Tests with generics produce llvm-cov show results with demangled names
that can include an unstable "crate disambiguator" (hex value). The
value changes when run in the Rust CI Windows environment. I added a sed
filter to strip them out (in a prior commit), but sed also appears to
fail in the same environment. Until I can figure out a workaround, I'm
just going to ignore this specific test result. I added a FIXME to
follow up later, but it's not that critical.
I also saw an error with Windows GNU, but the IO error did not
specify a path for the directory or file that triggered the error. I
updated the error messages to provide more info for next, time but also
noticed some other tests with similar steps did not fail. Looks
spurious.
Commit #16:
Modify rust-demangler to strip disambiguators by default
Commit #17:
Remove std::process::exit from coverage tests
Due to Issue #77553, programs that call std::process::exit() do not
generate coverage results on Windows MSVC.
Commit #18:
fix: test file paths exceeding Windows max path len
Related: https://github.com/rust-lang/rust/issues/66741
Guarded with `#![feature(default_alloc_error_handler)]` a default
`alloc_error_handler` is called, if a custom allocator is used and no
other custom `#[alloc_error_handler]` is defined.
The panic message does not contain the size anymore, because it would
pull in the fmt machinery, which would blow up the code size
significantly.
This patch adds support for the LLVM cmse_nonsecure_entry attribute.
This is a target-dependent attribute that only has sense for the
thumbv8m Rust targets.
You can find more information about this attribute here:
https://developer.arm.com/documentation/ecm0359818/latest/
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Remove `#[rustc_allow_const_fn_ptr]` and add `#![feature(const_fn_fn_ptr_basics)]`
`rustc_allow_const_fn_ptr` was a hack to work around the lack of an escape hatch for the "min `const fn`" checks in const-stable functions. Now that we have co-opted `allow_internal_unstable` for this purpose, we no longer need a bespoke attribute.
Now this functionality is gated under `const_fn_fn_ptr_basics` (how concise!), and `#[allow_internal_unstable(const_fn_fn_ptr_basics)]` replaces `#[rustc_allow_const_fn_ptr]`. `const_fn_fn_ptr_basics` allows function pointer types to appear in the arguments and locals of a `const fn` as well as function pointer casts to be performed inside a `const fn`. Both of these were allowed in constants and statics already. Notably, this does **not** allow users to invoke function pointers in a const context. Presumably, we will use a nicer name for that (`const_fn_ptr`?).
r? @oli-obk
This was a hack to work around the lack of an escape hatch for the "min
`const fn`" checks in const-stable functions. Now that we have co-opted
`allow_internal_unstable` for this purpose, we no longer need the
bespoke attribute.
Add `#![feature(const_fn_floating_point_arithmetic)]`
cc #76618
This is a template for splitting up `const_fn` into granular feature gates. I think this will make it easier, both for us and for users, to track stabilization of each individual feature. We don't *have* to do this, however. We could also keep stabilizing things out from under `const_fn`.
cc @rust-lang/wg-const-eval
r? @oli-obk
Add cfg(target_has_atomic_equal_alignment) and use it for Atomic::from_mut.
Fixes some platform-specific problems with #74532 by using the actual alignment of the types instead of hardcoding a few `target_arch`s.
r? @RalfJung
Remove MMX from Rust
Follow-up to https://github.com/rust-lang/stdarch/pull/890
This removes most of MMX from Rust (tests pass with small changes), keeping stable `is_x86_feature_detected!("mmx")` working.
use `array_windows` instead of `windows` in the compiler
I do think these changes are beautiful, but do have to admit that using type inference for the window length
can easily be confusing. This seems like a general issue with const generics, where inferring constants adds an additional
complexity which users have to learn and keep in mind.
Note when a a move/borrow error is caused by a deref coercion
Fixes#73268
When a deref coercion occurs, we may end up with a move error if the
base value has been partially moved out of. However, we do not indicate
anywhere that a deref coercion is occuring, resulting in an error
message with a confusing span.
This PR adds an explicit note to move errors when a deref coercion is
involved. We mention the name of the type that the deref-coercion
resolved to, as well as the `Deref::Target` associated type being used.
Fixes#73268
When a deref coercion occurs, we may end up with a move error if the
base value has been partially moved out of. However, we do not indicate
anywhere that a deref coercion is occuring, resulting in an error
message with a confusing span.
This PR adds an explicit note to move errors when a deref coercion is
involved. We mention the name of the type that the deref-coercion
resolved to, as well as the `Deref::Target` associated type being used.
`span.is_empty()` - returns true if `lo()` and `hi()` are equal. This is
not only a convenience, but makes it clear that a `Span` can be empty
(that is, retrieving the source for an empty `Span` will return an empty
string), and codifies the (otherwise undocumented--in the rustc_span
package, at least) fact that `Span` is a half-open interval (where
`hi()` is the open end).
`source_map.lookup_file_span()` - returns an enclosing `Span`
representing the start and end positions of the file enclosing the given
`BytePos`. This gives developers a clear way to quickly determine if any
any other `BytePos` or `Span` is also from the same file (for example,
by simply calling `file_span.contains(span)`).
This results in much simpler code and is much more runtime efficient
compared with the obvious alternative: calling `source_map.lookup_line()`
for any two `Span`'s byte positions, handle both arms of the `Result`
(both contain the file), and then compare files. It is also more
efficient than the non-public method `lookup_source_file_idx()` for each
`BytePos`, because, while comparing the internal source file indexes
would be efficient, looking up the source file index for every `BytePos`
or `Span` to be compared requires a binary search (worst case
performance being O(log n) for every lookup).
`source_map.lookup_file_span()` performs the binary search only once, to
get the `file_span` result that can be used to compare to any number of
other `BytePos` or `Span` values and those comparisons are always O(1).
