Stable hashing: add comments and tests concerning platform-independence
SipHasher128 implements short_write in an endian-independent way, yet
its write_xxx Hasher trait methods undo this endian-independence by byte
swapping the integer inputs on big-endian hardware. StableHasher then
adds endian-independence back by also byte-swapping on big-endian
hardware prior to invoking SipHasher128.
This double swap may have the appearance of being a no-op, but is in
fact by design. In particular, we really do want SipHasher128 to be
platform-dependent, in order to be consistent with the libstd SipHasher.
Try to clarify this intent. Also, add and update a couple of unit tests.
---
Previous commit text:
~SipHasher128: fix platform-independence confusion~
~StableHasher is supposed to ensure platform independence by converting
integers to little-endian and extending isize and usize to 64 bits as
necessary, but in fact, much of that work is already handled by
SipHasher128.~
~In particular, SipHasher128 implements short_write in an
endian-independent way, yet both StableHasher and SipHasher128
additionally attempt to achieve endian-independence by byte swapping on
BE hardware before invoking short writes. This double swap has no
effect, so let's remove it.~
~Because short_write is endian-independent, SipHasher128 is already
handling part of the platform-independence, and it would be somewhat
difficult to make it *not* handle that part with the current
implementation. As splitting platform-independence responsibilities
between StableHasher and SipHasher128 would be confusing, let's make
SipHasher128 handle all of it.~
~Finally, update some incorrect comments and increase test coverage.
Unit tests pass on both LE and BE systems.~
const evaluatable: improve `TooGeneric` handling
Instead of emitting an error in `fulfill`, we now correctly stall on inference variables.
As `const_eval_resolve` returns `ErrorHandled::TooGeneric` when encountering generic parameters on which
we actually do want to error, we check for inference variables and eagerly emit an error if they don't exist, returning `ErrorHandled::Reported` instead.
Also contains a small bugfix for `ConstEquate` where we previously only stalled on type variables. This is probably a leftover from
when we did not yet support stalling on const inference variables.
r? @oli-obk cc @varkor @eddyb
Defer Apple SDKROOT detection to link time.
This defers the detection of the SDKROOT for Apple iOS/tvOS targets to link time, instead of when the `Target` is defined. This allows commands that don't need to link to work (like `rustdoc` or `rustc --print=target-list`). This also makes `--print=target-list` a bit faster.
This also removes the note in the platform support documentation about these targets being missing. When I wrote it, I misunderstood how the SDKROOT stuff worked.
Notes:
* This means that JSON spec targets can't explicitly override these flags. I think that is probably fine, as I believe the value is generally required, and can be set with the SDKROOT environment variable.
* This changes `x86_64-apple-tvos` to use `appletvsimulator`. I think the original code was wrong (it was using `iphonesimulator`). Also, `x86_64-apple-tvos` seems broken in general, and I cannot build it locally. The `data_layout` does not appear to be correct (it is a copy of the arm64 layout instead of the x86_64 layout). I have not tried building Apple's LLVM to see if that helps, but I suspect it is just wrong (I'm uncertain since I don't know how the tvOS simulator works with its bitcode-only requirements).
* I'm tempted to remove the use of `Result` for built-in target definitions, since I don't think they should be fallible. This was added in https://github.com/rust-lang/rust/pull/34980, but that only relates to JSON definitions. I think the built-in targets shouldn't fail. I can do this now, or not.
Fixes#36156Fixes#76584
Fix recursive nonterminal expansion during pretty-print/reparse check
Makes progress towards #43081
In PR #73084, we started recursively expanded nonterminals during the
pretty-print/reparse check, allowing them to be properly compared
against the reparsed tokenstream.
Unfortunately, the recursive logic in that PR only handles the case
where a nonterminal appears inside a `TokenTree::Delimited`. If a
nonterminal appears directly in the expanded tokens of another
nonterminal, the inner nonterminal will not be expanded.
This PR fixes the recursive expansion of nonterminals, ensuring that
they are expanded wherever they occur.
Rollup of 12 pull requests
Successful merges:
- #77037 (more tiny clippy cleanups)
- #77233 (BTreeMap: keep an eye out on the size of the main components)
- #77280 (Ensure that all LLVM components requested by tests are available on CI)
- #77284 (library: Forward compiler-builtins "mem" feature)
- #77296 (liveness: Use Option::None to represent absent live nodes)
- #77322 (Add unstable book docs for `-Zunsound-mir-opts`)
- #77328 (Use `rtassert!` instead of `assert!` from the child process after fork() in std::sys::unix::process::Command::spawn())
- #77331 (Add test for async/await combined with const-generics.)
- #77338 (Fix typo in alloc vec comment)
- #77340 (Alloc vec use imported path)
- #77345 (Add test for issue #74761)
- #77348 (Update books)
Failed merges:
r? `@ghost`
Add support for cmse_nonsecure_entry attribute
This pull request adds the `cmse_nonsecure_entry` attribute under an unstable feature.
I was not sure if it was fine for me to send directly the pull-request or if I should submit a RFC first. I was told on Zulip that it was fine to do so but please close it if I need first submit a RFC or follow another process instead.
The `cmse_nonsecure_entry` attribute is a LLVM attribute that will be available in LLVM 11. I plan to rebase on the [upgrade PR](https://github.com/rust-lang/rust/pull/73526) once merged to make this one compile.
This attribute modifies code generation of the function as explained [here](https://developer.arm.com/documentation/ecm0359818/latest/) to make it work with the TrustZone-M hardware feature. This feature is only available on `thumbv8m` targets so I created an error for that if one tries to use this attribute for another target.
I added this attribute in Rust as any other LLVM attribute are added but since this one is target-dependent I am not sure if it was the best thing to do. Please indicate me if you think of other ways, like isolating target-dependent attributes together.
----------------
Tracking issue: https://github.com/rust-lang/rust/issues/75835
This patch adds support for the LLVM cmse_nonsecure_entry attribute.
This is a target-dependent attribute that only has sense for the
thumbv8m Rust targets.
You can find more information about this attribute here:
https://developer.arm.com/documentation/ecm0359818/latest/
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Secure entry functions do not support if arguments are passed on the
stack. An "unsupported" diagnostic will be emitted by LLVM if that is
the case.
This commits adds support in Rust for that diagnostic so that an error
will be output if that is the case!
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
SipHasher128 implements short_write in an endian-independent way, yet
its write_xxx Hasher trait methods undo this endian-independence by byte
swapping the integer inputs on big-endian hardware. StableHasher then
adds endian-independence back by also byte-swapping on big-endian
hardware prior to invoking SipHasher128.
This double swap may have the appearance of being a no-op, but is in
fact by design. In particular, we really do want SipHasher128 to be
platform-dependent, in order to be consistent with the libstd SipHasher.
Try to clarify this intent. Also, add and update a couple of unit tests.
This helper function was meant to reduce code duplication between
const-checking pre- and post-drop-elaboration. Most of the functionality
is only relevant for the pre-drop-elaboration pass.
Liveness refactoring continued
* Move body_owner field from IrMaps to Liveness (the only user of the field).
* Use upvars instead of FnKind to check for closures (avoids FnKind, will be useful when checking all bodies, not just fns).
* Use visit_param to add variables corresponding to params.
* Store upvars_mentioned inside Liveness struct.
* Inline visitor implementation for IrMaps, avoiding unnecessary indirection.
* Test interaction with automatically_derived attribute (not covered by any of existing tests).
No functional changes intended.
This commit improves the "try using the enum's variant" suggestion:
- Variants in suggestions would not result in more errors (e.g. use
of a struct variant is only suggested if the suggestion can
trivially construct that variant). Therefore, suggestions are only
emitted for variants that have no fields (since the suggestion
can't know what value fields would have).
- Suggestions include the syntax for constructing the variant. If a
struct or tuple variant is suggested, then it is constructed in the
suggestion - unless in pattern-matching or when arguments are already
provided.
- A help message is added which mentions the variants which are no
longer suggested.
Signed-off-by: David Wood <david@davidtw.co>
expand: Stop normalizing `NtIdent`s before passing them to built-in macros
Built-in macros should be able to deal with `NtIdents` in the input by themselves like any other parser code.
You can't imagine how bad mutable AST visitors are, *especially* if they are modifying tokens.
This is one step towards removing token visiting from the visitor infrastructure (https://github.com/rust-lang/rust/pull/77271 also works in this direction.)
Optimize `IntRange::from_pat`, then shrink `ParamEnv`
Resolves#77058.
r? `@Mark-Simulacrum`
cc `@vandenheuvel`
Looking at the output of `perf report` for #76244, the hot instructions seemed to be around the call to `pat_constructor` in `IntRange::from_pat`. I carried out an obvious optimization, but it actually made the instruction count higher (see #77075). However, it seems to have mitigated whatever was causing the pipeline stalls, so when combined with #76244, it's a net win.
As you can see below, the regression in #76244 seems to have originated from something measured by `stalled-cycles-backend`. I'll try to collect some finer-grained stats to see if I can isolate it. I wish I had a better idea of what was going on here. I'd like to prevent the regression from reappearing in the future due to small changes in unrelated code.
<details>
<summary>Current `master`:</summary>
```
Performance counter stats for 'cargo +baseline-stage1 check':
2,275.67 msec task-clock:u # 0.998 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
49,826 page-faults:u # 0.022 M/sec
5,117,221,678 cycles:u # 2.249 GHz
299,655,943 stalled-cycles-frontend:u # 5.86% frontend cycles idle
2,284,213,395 stalled-cycles-backend:u # 44.64% backend cycles idle
8,051,871,959 instructions:u # 1.57 insn per cycle
# 0.28 stalled cycles per insn
1,359,589,402 branches:u # 597.447 M/sec
7,359,347 branch-misses:u # 0.54% of all branches
2.281030026 seconds time elapsed
2.108197000 seconds user
0.164183000 seconds sys
```
</details>
<details>
<summary>Shrink `ParamEnv` without changing `IntRange::from_pat`:</summary>
```
Performance counter stats for 'cargo +perf-stage1 check':
2,751.79 msec task-clock:u # 0.996 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
50,103 page-faults:u # 0.018 M/sec
6,260,590,019 cycles:u # 2.275 GHz
317,355,920 stalled-cycles-frontend:u # 5.07% frontend cycles idle
3,397,743,582 stalled-cycles-backend:u # 54.27% backend cycles idle
8,276,224,367 instructions:u # 1.32 insn per cycle
# 0.41 stalled cycles per insn
1,370,453,386 branches:u # 498.023 M/sec
7,281,031 branch-misses:u # 0.53% of all branches
2.763265838 seconds time elapsed
2.544578000 seconds user
0.204548000 seconds sys
```
</details>
<details>
<summary>Shrink `ParamEnv` and change `IntRange::from_pat`: </summary>
```
Performance counter stats for 'cargo +perf-stage1 check':
2,295.57 msec task-clock:u # 0.996 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
49,959 page-faults:u # 0.022 M/sec
5,151,407,066 cycles:u # 2.244 GHz
324,517,829 stalled-cycles-frontend:u # 6.30% frontend cycles idle
2,301,671,001 stalled-cycles-backend:u # 44.68% backend cycles idle
8,130,868,329 instructions:u # 1.58 insn per cycle
# 0.28 stalled cycles per insn
1,356,618,512 branches:u # 590.972 M/sec
7,323,800 branch-misses:u # 0.54% of all branches
2.304509653 seconds time elapsed
2.128090000 seconds user
0.163909000 seconds sys
```
</details>
Makes progress towards #43081
In PR #73084, we started recursively expanded nonterminals during the
pretty-print/reparse check, allowing them to be properly compared
against the reparsed tokenstream.
Unfortunately, the recursive logic in that PR only handles the case
where a nonterminal appears inside a `TokenTree::Delimited`. If a
nonterminal appears directly in the expanded tokens of another
nonterminal, the inner nonterminal will not be expanded.
This PR fixes the recursive expansion of nonterminals, ensuring that
they are expanded wherever they occur.
Rollup of 7 pull requests
Successful merges:
- #76454 (UI to unit test for those using Cell/RefCell/UnsafeCell)
- #76474 (Add option to pass a custom codegen backend from a driver)
- #76711 (diag: improve closure/generic parameter mismatch)
- #77170 (Remove `#[rustc_allow_const_fn_ptr]` and add `#![feature(const_fn_fn_ptr_basics)]`)
- #77194 (Add doc alias for iterator fold)
- #77288 (fix building libstd for Miri on macOS)
- #77295 (Update unstable-book: Fix ABNF in inline assembly docs)
Failed merges:
r? `@ghost`
Remove `#[rustc_allow_const_fn_ptr]` and add `#![feature(const_fn_fn_ptr_basics)]`
`rustc_allow_const_fn_ptr` was a hack to work around the lack of an escape hatch for the "min `const fn`" checks in const-stable functions. Now that we have co-opted `allow_internal_unstable` for this purpose, we no longer need a bespoke attribute.
Now this functionality is gated under `const_fn_fn_ptr_basics` (how concise!), and `#[allow_internal_unstable(const_fn_fn_ptr_basics)]` replaces `#[rustc_allow_const_fn_ptr]`. `const_fn_fn_ptr_basics` allows function pointer types to appear in the arguments and locals of a `const fn` as well as function pointer casts to be performed inside a `const fn`. Both of these were allowed in constants and statics already. Notably, this does **not** allow users to invoke function pointers in a const context. Presumably, we will use a nicer name for that (`const_fn_ptr`?).
r? @oli-obk
diag: improve closure/generic parameter mismatch
Fixes#51154.
This PR improves the diagnostic when a type parameter is expected and a closure is found, noting that each closure has a distinct type and therefore could not always match the caller-chosen type of the parameter.
r? @estebank
Add option to pass a custom codegen backend from a driver
This allows the driver to pass information to the codegen backend. For example the headcrab debugger may in the future want to use cg_clif to JIT code to be injected in the debuggee. This would PR make it possible to tell cg_clif which symbol can be found at which address and to tell it to inject the JITed code into the right process.
This PR may also help with https://github.com/rust-lang/miri/pull/1540 by allowing miri to provide a codegen backend that only emits metadata and doesn't perform any codegen.
cc @nbaksalyar (headcrab)
cc @RalfJung (miri)
[mir-opt] Introduce a new flag to enable experimental/unsound mir opts
This implements part of https://github.com/rust-lang/compiler-team/issues/319. The exact name of this flag was not decided as part of that MCP and some people expressed that it should include "unsound" in some way.
I've chosen to use `enable-experimental-unsound-mir-opts` as the name. While long, I don't think that matters too much as really it will only be used by some mir-opt tests. If you object or have a better name, please leave a comment!
r? `@oli-obk`
cc `@rust-lang/wg-mir-opt` `@RalfJung`
Deduplicate and generalize some (de/)serializer impls
I noticed this while implementing #77227 and getting a "not implemented for [T; 16]" error. There's likely more things we can deduplicate in this file, but I didn't need any additional changes.
Replace `discriminant_switch_effect` with more general version
#68528 added a new edge-specific effect for `SwitchInt` terminators, `discriminant_switch_effect`, to the dataflow framework. While this accomplished the short-term goal of making drop elaboration more precise, it wasn't really useful in other contexts: It only supported `SwitchInt`s on the discriminant of an `enum` and did not allow effects to be applied along the "otherwise" branch. In const-propagation, for example, arbitrary edge-specific effects for the targets of a `SwitchInt` can be used to remember the value a `match` scrutinee must have in each arm.
This PR replaces `discriminant_switch_effect` with a more general `switch_int_edge_effects` method. The new method has a slightly different interface from the other edge-specific effect methods (e.g. `call_return_effect`). This divergence is explained in the new method's documentation, and reading the changes to the various dataflow impls as well as `direction.rs` should further clarify things. This PR should not change behavior.
Small improvements in liveness pass
* Remove redundant debug logging (`add_variable` already contains logging).
* Remove redundant fields for a number of live nodes and variables.
* Delay conversion from a symbol to a string until linting.
* Inline contents of specials struct.
* Remove unnecessary local variable exit_ln.
* Use newtype_index for Variable and LiveNode.
* Access live nodes directly through self.lnks[ln].
No functional changes intended (except those related to the logging).
This was a hack to work around the lack of an escape hatch for the "min
`const fn`" checks in const-stable functions. Now that we have co-opted
`allow_internal_unstable` for this purpose, we no longer need the
bespoke attribute.
Separate `private_intra_doc_links` and `broken_intra_doc_links` into separate lints
This is not ideal because it means `deny(broken_intra_doc_links)` will
no longer `deny(private_intra_doc_links)`. However, it can't be fixed
with a new lint group, because `broken` is already in the `rustdoc` lint
group; there would need to be a way to nest groups somehow.
This also removes the early `return` so that the link will be generated
even though it gives a warning.
r? @Manishearth
cc @ecstatic-morse (https://github.com/rust-lang/rust/pull/77242#issuecomment-699565095)
Check for missing const-stability attributes in `rustc_passes`
Currently, this happens as a side effect of `is_min_const_fn`, which is non-obvious. Also adds a test for this case, since we didn't seem to have one before.
This is not ideal because it means `deny(broken_intra_doc_links)` will
no longer `deny(private_intra_doc_links)`. However, it can't be fixed
with a new lint group, because `broken` is already in the `rustdoc` lint
group; there would need to be a way to nest groups somehow.
This also removes the early `return` so that the link will be generated
even though it gives a warning.
might_permit_raw_init: also check aggregate fields
This is the next step for https://github.com/rust-lang/rust/issues/66151: when doing `mem::zeroed`/`mem::uninitialized`, also recursively check fields of aggregates (except for arrays) for whether they permit zero/uninit initialization.
Refactor and fix intra-doc link diagnostics, and fix links to primitives
Closes https://github.com/rust-lang/rust/issues/76925, closes https://github.com/rust-lang/rust/issues/76693, closes https://github.com/rust-lang/rust/issues/76692.
Originally I only meant to fix#76925. But the hack with `has_primitive` was so bad it was easier to fix the primitive issues than to try and work around it.
Note that this still has one bug: `std::primitive::i32::MAX` does not resolve. However, this fixes the ICE so I'm fine with fixing the link in a later PR.
This is part of a series of refactors to make #76467 possible.
This is best reviewed commit-by-commit; it has detailed commit messages.
r? `@euclio`
Previously, this method called the more general `pat_constructor`
function, which can return other pattern variants besides `IntRange`.
Then it throws away any non-`IntRange` variants. Specialize it so work
is only done when it could result in an `IntRange`.
This patch also:
* Add soft-float supports: only f32
* zero-extend i8/i16 to i32 because MIPS only supports register-length
arithmetic.
* Update table in asm! chapter in unstable book.
Return values up to 128 bits in registers
This fixes https://github.com/rust-lang/rust/issues/26494#issuecomment-619506345 by making Rust's default ABI pass return values up to 128 bits in size in registers, just like the System V ABI.
The result is that these methods from the comment linked above now generate the same code, making the Rust ABI as efficient as the `"C"` ABI:
```rust
pub struct Stats { x: u32, y: u32, z: u32, }
pub extern "C" fn sum_c(a: &Stats, b: &Stats) -> Stats {
return Stats {x: a.x + b.x, y: a.y + b.y, z: a.z + b.z };
}
pub fn sum_rust(a: &Stats, b: &Stats) -> Stats {
return Stats {x: a.x + b.x, y: a.y + b.y, z: a.z + b.z };
}
```
```asm
sum_rust:
movl (%rsi), %eax
addl (%rdi), %eax
movl 4(%rsi), %ecx
addl 4(%rdi), %ecx
movl 8(%rsi), %edx
addl 8(%rdi), %edx
shlq $32, %rcx
orq %rcx, %rax
retq
```
pretty-print-reparse hack: Rename some variables for clarity
This will also make it easier to make the comparisons asymmetric.
Also one impossible case is removed.
r? @Aaron1011
Move helper function for `missing_const_for_fn` out of rustc to clippy
cc @rust-lang/clippy @ecstatic-morse #76618
r? @Manishearth
I also removed all support for suggesting a function could be `const fn` when that would require feature gates to actually work.
This means we'll now have to maintain this ourselves in clippy, but that's how most lints work anyway, so...
Late link args order
MSYS2 changed how winpthreads is built and as the result it now depends on more mingw-w64 libraries.
This PR affects only MinGW targets since nobody else is using `late_link_args_{dynamic,static}`. Now the order is similar to how it used to be before https://github.com/rust-lang/rust/pull/67502.
Enable const propagation into operands at mir_opt_level=2
Feature was added in #74507 but gated with `mir_opt_level>=3` because of compile time regressions. Let's see whether the LLVM 11 update solves that.
As the [perf results](https://github.com/rust-lang/rust/pull/77107#issuecomment-697668154) show, enabling this optimization results in a lot less regression as before.
cc @oli-obk
r? @ghost
SsoHashSet::replace had to be removed because
it requires missing API from SsoHashMap.
It's not a widely used function, so I think it's ok
to omit it for now.
EitherIter moved into its own file.
Also sprinkled code with #[inline] attributes where appropriate.
Encode less metadata for proc-macro crates
Currently, we serialize the same crate metadata for proc-macro crates as
we do for normal crates. This is quite wasteful - almost none of this
metadata is ever used, and much of it can't even be deserialized (if it
contains a foreign `CrateNum`).
This PR changes metadata encoding to skip encoding the majority of crate
metadata for proc-macro crates. Most of the `Lazy<[T]>` fields are left
completetly empty, while the non-lazy fields are left as-is.
Additionally, proc-macros now have a def span that does not include
their body. This was done for normal functions in #75465, but was missed
for proc-macros.
As a result of this PR, we should only ever encode local `CrateNum`s
when encoding proc-macro crates. I've added a specialized serialization
impl for `CrateNum` to assert this.
Currently, we serialize the same crate metadata for proc-macro crates as
we do for normal crates. This is quite wasteful - almost none of this
metadata is ever used, and much of it can't even be deserialized (if it
contains a foreign `CrateNum`).
This PR changes metadata encoding to skip encoding the majority of crate
metadata for proc-macro crates. Most of the `Lazy<[T]>` fields are left
completetly empty, while the non-lazy fields are left as-is.
Additionally, proc-macros now have a def span that does not include
their body. This was done for normal functions in #75465, but was missed
for proc-macros.
As a result of this PR, we should only ever encode local `CrateNum`s
when encoding proc-macro crates. I've added a specialized serialization
impl for `CrateNum` to assert this.
Remove TrustedLen requirement from BuilderMethods::switch
The main use case of TrustedLen is allowing APIs to specialize on it,
but no use of it uses that specialization. Instead, only the .len()
function provided by ExactSizeIterator is used, which is already
required to be accurate.
Thus, the TrustedLen requirement on BuilderMethods::switch is redundant.
Add `#![feature(const_fn_floating_point_arithmetic)]`
cc #76618
This is a template for splitting up `const_fn` into granular feature gates. I think this will make it easier, both for us and for users, to track stabilization of each individual feature. We don't *have* to do this, however. We could also keep stabilizing things out from under `const_fn`.
cc @rust-lang/wg-const-eval
r? @oli-obk
Rollup of 15 pull requests
Successful merges:
- #76932 (Relax promises about condition variable.)
- #76973 (Unstably allow assume intrinsic in const contexts)
- #77005 (BtreeMap: refactoring around edges)
- #77066 (Fix dest prop miscompilation around references)
- #77073 (dead_code: look at trait impls even if they don't contain items)
- #77086 (Include libunwind in the rust-src component.)
- #77097 (Make [].as_[mut_]ptr_range() (unstably) const.)
- #77106 (clarify that `changelog-seen = 1` goes to the beginning of config.toml)
- #77120 (Add `--keep-stage-std` to `x.py` for keeping only standard library artifacts)
- #77126 (Invalidate local LLVM cache less often)
- #77146 (Install std for non-host targets)
- #77155 (remove enum name from ImplSource variants)
- #77176 (Removing erroneous semicolon in transmute documentation)
- #77183 (Allow multiple allow_internal_unstable attributes)
- #77189 (Remove extra space from vec drawing)
Failed merges:
r? `@ghost`
This refactors handling of `Rvalue::{Unary,Binary}Op` in the
const-checker. Now we `span_bug` if there's an unexpected type in a
primitive operation. This also allows unary negation on
`char` values through the const-checker because it makes the code a bit
cleaner. `char` does not actually support these operations, and if it
did, we could evaluate them at compile-time.
Ignore ZST offsets when deciding whether to use Scalar/ScalarPair layout
This is important because Scalar/ScalarPair layout previously would not be used if any ZST had nonzero offset.
For example, before this change, only `((), u128)` would be laid out like `u128`, not `(u128, ())`.
Fixes#63244
perf: move cold path of `process_obligations` into a separate function
cc #76575
This probably won't matter too much in the long run once #69218 is merged so we may not want to merge this.
r? `@ecstatic-morse`
Fix#76803 miscompilation
Fixes#76803
Seems like it was an oversight that the discriminant value being set was not compared to the target value from the SwitchInt, as a comment says this is a requirement for the optimization to be sound.
r? `@wesleywiser` since you are probably familiar with the optimization and made #76837 to workaround the bug
Rollup of 15 pull requests
Successful merges:
- #75438 (Use adaptive SVG favicon for rustdoc like other rust sites)
- #76304 (Make delegation methods of `std::net::IpAddr` unstably const)
- #76724 (Allow a unique name to be assigned to dataflow graphviz output)
- #76978 (Documented From impls in std/sync/mpsc/mod.rs)
- #77044 (Liballoc bench vec use mem take not replace)
- #77050 (Typo fix: "satsify" -> "satisfy")
- #77074 (add array::from_ref)
- #77078 (Don't use an if guard to check equality with a constant)
- #77079 (Use `Self` in docs when possible)
- #77081 (Merge two almost identical match arms)
- #77121 (Updated html_root_url for compiler crates)
- #77136 (Suggest `const_mut_refs`, not `const_fn` for mutable references in `const fn`)
- #77160 (Suggest `const_fn_transmute`, not `const_fn`)
- #77164 (Remove workaround for deref issue that no longer exists.)
- #77165 (Followup to #76673)
Failed merges:
r? `@ghost`
Suggest `const_fn_transmute`, not `const_fn`
More fallout from #76850 in the vein of #77134. The fix is the same. I looked through the structured errors file and didn't see any more of this kind of diagnostics bug.
r? @oli-obk
Suggest `const_mut_refs`, not `const_fn` for mutable references in `const fn`
Resolves#77134.
Prior to #76850, most uses of `&mut` in `const fn` ~~required~~ involved two feature gates, `const_mut_refs` and `const_fn`. The first allowed all mutable borrows of locals. The second allowed only locals, arguments and return values whose types contained `&mut`. I switched the second check to the `const_mut_refs` gate. However, I forgot update the error message with the new suggestion.
Alternatively, we could revert to having two different feature gates for this. OP's code never borrows anything mutably, so it didn't need `const_mut_refs` in the past, only `const_fn`. I'd prefer to keep everything under a single gate, however.
r? @oli-obk
Allow a unique name to be assigned to dataflow graphviz output
Previously, if the same analysis were invoked multiple times in a single compilation session, the graphviz output for later runs would overwrite that of previous runs. Allow callers to add a unique identifier to each run so this can be avoided.
DroplessArena: Allocate objects from the end of memory chunk
Allocating from the end of memory chunk simplifies the alignment code
and reduces the number of checked arithmetic operations.
Add fast path for match checking
This adds a fast path that would reduce the complexity to linear on matches consisting of only variant patterns (i.e. enum matches). (Also see: #7462) Unfortunately, I was too lazy to add a similar fast path for constants (mostly for integer matches), ideally that could be added another day.
TBH, I'm not confident with the performance claims due to the fact that enums tends to be small and FxHashMap could add a lot of overhead.
r? `@Mark-Simulacrum`
needs perf
The main use case of TrustedLen is allowing APIs to specialize on it,
but no use of it uses that specialization. Instead, only the .len()
function provided by ExactSizeIterator is used, which is already
required to be accurate.
Thus, the TrustedLen requirement on BuilderMethods::switch is redundant.
const_evaluatable_checked: extend predicate collection
We now walk the hir instead of using `ty` so that we get better spans here, While I am still not completely sure if that's
what we want in the end, it does seem a lot closer to the final goal than the previous version.
We also look into type aliases (and use a `TypeVisitor` here), about which I am not completely sure, but we will see how well this works.
We also look into fn decls, so the following should work now.
```rust
fn test<T>() -> [u8; std::mem::size_of::<T>()] {
[0; std::mem::size_of::<T>()]
}
```
Additionally, we visit the optional trait and self type of impls.
r? `@oli-obk`
Fix underflow when calculating the number of no-op jumps folded
When removing unwinds to no-op blocks and folding jumps to no-op blocks,
remove the unwind target first. Otherwise we cannot determine if target
has been already folded or not.
Previous implementation incorrectly assumed that all resume targets had
been folded already, occasionally resulting in an underflow:
```
remove_noop_landing_pads: removed 18446744073709551613 jumps and 3 landing pads
```
- Add `PrimTy::name` and `PrimTy::name_str`
- Use those new functions to distinguish between the name in scope and
the canonical name
- Fix diagnostics for primitive types
- Add tests for primitives
Rollup of 9 pull requests
Successful merges:
- #76898 (Record `tcx.def_span` instead of `item.span` in crate metadata)
- #76939 (emit errors during AbstractConst building)
- #76965 (Add cfg(target_has_atomic_equal_alignment) and use it for Atomic::from_mut.)
- #76993 (Changing the alloc() to accept &self instead of &mut self)
- #76994 (fix small typo in docs and comments)
- #77017 (Add missing examples on Vec iter types)
- #77042 (Improve documentation for ToSocketAddrs)
- #77047 (Miri: more informative deallocation error messages)
- #77055 (Add #[track_caller] to more panicking Cell functions)
Failed merges:
r? `@ghost`
MIR pass to remove unneeded drops on types not needing drop
This is heavily dependent on MIR inlining running to actually see the drop statement.
Do we want to special case replacing a call to std::mem::drop with a goto aswell?
Add cfg(target_has_atomic_equal_alignment) and use it for Atomic::from_mut.
Fixes some platform-specific problems with #74532 by using the actual alignment of the types instead of hardcoding a few `target_arch`s.
r? @RalfJung
emit errors during AbstractConst building
There changes are currently still untested, so I don't expect this to pass CI 😆
It seems to me like this is the direction we want to go in, though we didn't have too much of a discussion about this.
r? @oli-obk
Record `tcx.def_span` instead of `item.span` in crate metadata
This was missed in PR #75465. As a result, a few places have been using
the full body span of functions, instead of just the header span.
SimplifyComparisonIntegral: fix miscompilation
Fixes#76432
Only insert StorageDeads if we actually removed one.
Fixes an issue where we added StorageDead to a place with no StorageLive
r? `@oli-obk`
Remove `qualify_min_const_fn`
~~Blocked on #76807 (the first six commits).~~
With this PR, all checks in `qualify_min_const_fn` are replicated in `check_consts`, and the former is no longer invoked. My goal was to have as few changes to test output as possible, since making sweeping changes to the code *while* doing big batches of diagnostics updates turned out to be a headache. To this end, there's a few `HACK`s in `check_consts` to achieve parity with `qualify_min_const_fn`.
The new system that replaces `is_min_const_fn` is referred to as "const-stability" My end goal for the const-stability rules is this:
* Const-stability is only applicable to functions defined in `staged_api` crates.
* All functions not marked `rustc_const_unstable` are considered "const-stable".
- NB. This is currently not implemented. `#[unstable]` functions are also const-unstable. This causes problems when searching for feature gates.
- All "const-unstable" functions have an associated feature gate
* const-stable functions can only call other const-stable functions
- `allow_internal_unstable` can be used to circumvent this.
* All const-stable functions are subject to some additional checks (the ones that were unique to `qualify_min_const_fn`)
The plan is to remove each `HACK` individually in subsequent PRs. That way, changes to error message output can be reviewed in isolation.
