Enable verification for 1/32th of queries loaded from disk
This is a limited enabling of incremental verification for query results loaded from disk, which previously did not run without -Zincremental-verify-ich. If enabled for all queries, we see a probably unacceptable hit of ~50% in the worst case, so this pairs back the verification to a more limited set based on the hash key.
Per collected [perf results](https://github.com/rust-lang/rust/pull/84227#issuecomment-953350582), this is a regression of at most 7% on coercions opt incr-unchanged, and typically less than 0.5% on other benchmarks (largely limited to incr-unchanged). I believe this is acceptable performance to land, and we can either ratchet it up or down fairly easily.
We have no real sense of whether this will lead to a large amount of assertions in the wild, but since those assertions may lead to miscompilations today, it seems potentially warranted. We have a good bit of lead time until the next stable release, though the holiday season will also start soon; we may wish to discuss the timing of enabling this and weigh the desire to prevent (possible) miscompilations against assertions.
cc `@rust-lang/wg-incr-comp`
Improve error when an .rlib can't be parsed
This usually describes either an error in the compiler itself or some
sort of IO error. Either way, we should report it to the user rather
than just saying "crate not found".
This only gives an error if the crate couldn't be loaded at all - if the
compiler finds another .rlib or .rmeta file which was valid, it will
continue to compile the crate.
Example output:
```
error[E0785]: found invalid metadata files for crate `foo`
--> bar.rs:3:24
|
3 | println!("{}", foo::FOO_11_49[0]);
| ^^^
|
= warning: failed to parse rlib '/home/joshua/test-rustdoc/libfoo.rlib': Invalid archive extended name offset
```
cc `@ehuss`
This usually describes either an error in the compiler itself or some
sort of IO error. Either way, we should report it to the user rather
than just saying "crate not found".
This only gives an error if the crate couldn't be loaded at all - if the
compiler finds another .rlib or .rmeta file which was valid, it will
continue to compile the crate.
Example output:
```
error[E0785]: found invalid metadata files for crate `foo`
--> bar.rs:3:24
|
3 | println!("{}", foo::FOO_11_49[0]);
| ^^^
|
= warning: failed to parse rlib '/home/joshua/test-rustdoc/libfoo.rlib': Invalid archive extended name offset
```
TraitKind -> Trait
TyAliasKind -> TyAlias
ImplKind -> Impl
FnKind -> Fn
All `*Kind`s in AST are supposed to be enums.
Tuple structs are converted to braced structs for the types above, and fields are reordered in syntactic order.
Also, mutable AST visitor now correctly visit spans in defaultness, unsafety, impl polarity and constness.
Add features gates for experimental asm features
This PR splits off parts of `asm!` into separate features because they are not ready for stabilization.
Specifically this adds:
- `asm_const` for `const` operands.
- `asm_sym` for `sym` operands.
- `asm_experimental_arch` for architectures other than x86, x86_64, arm, aarch64 and riscv.
r? `@nagisa`
Rollup of 6 pull requests
Successful merges:
- #90487 (Add a chapter on reading Rustdoc output)
- #90508 (Apply adjustments for field expression even if inaccessible)
- #90627 (Suggest dereference of `Box` when inner type is expected)
- #90642 (use matches!() macro in more places)
- #90646 (type error go brrrrrrrr)
- #90649 (Run reveal_all on MIR when inlining is activated.)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
type error go brrrrrrrr
Fixes#90444
when we relate something like:
`fn(fn((), (), u32))` with `fn(fn((), (), ()))`
we relate the inner fn ptrs:
`fn((), (), u32)` with `fn((), (), ())`
yielding a `TypeError::ArgumentSorts(_, 2)` which we then use as the `TypeError` for the `fn(fn(..))` which later causes the ICE as the `2` does not correspond to any input or output types in `fn(_)`
r? `@estebank`
Suggest dereference of `Box` when inner type is expected
For example:
enum Ty {
Unit,
List(Box<Ty>),
}
fn foo(x: Ty) -> Ty {
match x {
Ty::Unit => Ty::Unit,
Ty::List(elem) => foo(elem),
}
}
Before, the only suggestion was to rewrap `inner` with `Ty::Wrapper`,
which is unhelpful and confusing:
error[E0308]: mismatched types
--> src/test/ui/suggestions/boxed-variant-field.rs:9:31
|
9 | Ty::List(elem) => foo(elem),
| ^^^^
| |
| expected enum `Ty`, found struct `Box`
| help: try using a variant of the expected enum: `Ty::List(elem)`
|
= note: expected enum `Ty`
found struct `Box<Ty>`
Now, rustc will first suggest dereferencing the `Box`, which is most
likely what the user intended:
error[E0308]: mismatched types
--> src/test/ui/suggestions/boxed-variant-field.rs:9:31
|
9 | Ty::List(elem) => foo(elem),
| ^^^^ expected enum `Ty`, found struct `Box`
|
= note: expected enum `Ty`
found struct `Box<Ty>`
help: try dereferencing the `Box`
|
9 | Ty::List(elem) => foo(*elem),
| +
help: try using a variant of the expected enum
|
9 | Ty::List(elem) => foo(Ty::List(elem)),
| ~~~~~~~~~~~~~~
r? ``@davidtwco``
Apply adjustments for field expression even if inaccessible
The adjustments are used later by ExprUseVisitor to build Place projections and without adjustments it can produce invalid result.
Fix#90483
``@rustbot`` label: T-compiler
For example:
enum Ty {
Unit,
List(Box<Ty>),
}
fn foo(x: Ty) -> Ty {
match x {
Ty::Unit => Ty::Unit,
Ty::List(elem) => foo(elem),
}
}
Before, the only suggestion was to rewrap `elem` with `Ty::List`,
which is unhelpful and confusing:
error[E0308]: mismatched types
--> src/test/ui/suggestions/boxed-variant-field.rs:9:31
|
9 | Ty::List(elem) => foo(elem),
| ^^^^
| |
| expected enum `Ty`, found struct `Box`
| help: try using a variant of the expected enum: `Ty::List(elem)`
|
= note: expected enum `Ty`
found struct `Box<Ty>`
Now, rustc will first suggest dereferencing the `Box`, which is most
likely what the user intended:
error[E0308]: mismatched types
--> src/test/ui/suggestions/boxed-variant-field.rs:9:31
|
9 | Ty::List(elem) => foo(elem),
| ^^^^ expected enum `Ty`, found struct `Box`
|
= note: expected enum `Ty`
found struct `Box<Ty>`
help: try dereferencing the `Box`
|
9 | Ty::List(elem) => foo(*elem),
| +
help: try using a variant of the expected enum
|
9 | Ty::List(elem) => foo(Ty::List(elem)),
| ~~~~~~~~~~~~~~
Optimize bidi character detection.
Should fix most of the performance regression of the bidi character detection (#90514), to be confirmed with a perf run.
Initialize LLVM time trace profiler on each code generation thread
In https://reviews.llvm.org/D71059 LLVM 11, the time trace profiler was
extended to support multiple threads.
`timeTraceProfilerInitialize` creates a thread local profiler instance.
When a thread finishes `timeTraceProfilerFinishThread` moves a thread
local instance into a global collection of instances. Finally when all
codegen work is complete `timeTraceProfilerWrite` writes data from the
current thread local instance and the instances in global collection
of instances.
Previously, the profiler was intialized on a single thread only. Since
this thread performs no code generation on its own, the resulting
profile was empty.
Update LLVM codegen to initialize & finish time trace profiler on each
code generation thread.
cc `@tmandry`
r? `@wesleywiser`
Implementation of GATs outlives lint
See #87479 for background. Closes#87479
The basic premise of this lint/error is to require the user to write where clauses on a GAT when those bounds can be implied or proven from any function on the trait returning that GAT.
## Intuitive Explanation (Attempt) ##
Let's take this trait definition as an example:
```rust
trait Iterable {
type Item<'x>;
fn iter<'a>(&'a self) -> Self::Item<'a>;
}
```
Let's focus on the `iter` function. The first thing to realize is that we know that `Self: 'a` because of `&'a self`. If an impl wants `Self::Item` to contain any data with references, then those references must be derived from `&'a self`. Thus, they must live only as long as `'a`. Furthermore, because of the `Self: 'a` implied bound, they must live only as long as `Self`. Since it's `'a` is used in place of `'x`, it is reasonable to assume that any value of `Self::Item<'x>`, and thus `'x`, will only be able to live as long as `Self`. Therefore, we require this bound on `Item` in the trait.
As another example:
```rust
trait Deserializer<T> {
type Out<'x>;
fn deserialize<'a>(&self, input: &'a T) -> Self::Out<'a>;
}
```
The intuition is similar here, except rather than a `Self: 'a` implied bound, we have a `T: 'a` implied bound. Thus, the data on `Self::Out<'a>` is derived from `&'a T`, and thus it is reasonable to expect that the lifetime `'x` will always be less than `T`.
## Implementation Algorithm ##
* Given a GAT `<P0 as Trait<P1..Pi>>::G<Pi...Pn>` declared as `trait T<A1..Ai> for A0 { type G<Ai...An>; }` used in return type of one associated function `F`
* Given env `E` (including implied bounds) for `F`
* For each lifetime parameter `'a` in `P0...Pn`:
* For each other type parameter `Pi != 'a` in `P0...Pn`: // FIXME: this include of lifetime parameters too
* If `E => (P: 'a)`:
* Require where clause `Ai: 'a`
## Follow-up questions ##
* What should we do when we don't pass params exactly?
For this example:
```rust
trait Des {
type Out<'x, D>;
fn des<'z, T>(&self, data: &'z Wrap<T>) -> Self::Out<'z, Wrap<T>>;
}
```
Should we be requiring a `D: 'x` clause? We pass `Wrap<T>` as `D` and `'z` as `'x`, and should be able to prove that `Wrap<T>: 'z`.
r? `@nikomatsakis`
Properly register text_direction_codepoint_in_comment lint.
This makes it known to the compiler so it can be configured like with `#![allow(text_direction_codepoint_in_comment)]`.
Fixes#90614.
In https://reviews.llvm.org/D71059 LLVM 11, the time trace profiler was
extended to support multiple threads.
`timeTraceProfilerInitialize` creates a thread local profiler instance.
When a thread finishes `timeTraceProfilerFinishThread` moves a thread
local instance into a global collection of instances. Finally when all
codegen work is complete `timeTraceProfilerWrite` writes data from the
current thread local instance and the instances in global collection
of instances.
Previously, the profiler was intialized on a single thread only. Since
this thread performs no code generation on its own, the resulting
profile was empty.
Update LLVM codegen to initialize & finish time trace profiler on each
code generation thread.
Demote metadata load warning to "info".
There is a warn log message for whenever the crate loader fails to load metadata from a candidate file. I think this warning is too aggressive, as there are several situations where metadata information might not be found in a candidate file, which is normal. Also, this warning is somewhat confusing, and non-actionable in most cases for a user (most users will not know what it means).
If the crate loader ultimately does not find a valid crate, then an error will be reported (and hopefully #88368 will improve that error message).
If a rustc developer wants to debug a loader problem, they can still use `RUSTC_LOG=rustc_metadata=debug` and get the details.
There is more discussion of this particular warning at https://github.com/rust-lang/rust/issues/89795#issuecomment-940798190.
Fixes#90525
Update aarch64 `target_feature` list for LLVM 12.
Many of these feature are now available on all valid LLVM versions.
I've also added a few new ones to the list.
r? `@Amanieu`
