This commit teaches ASTDeclReader::attachPreviousDecl to successfully merge
two Decl's when one contains an inheritable attribute like the
MSInheritanceAttr. Usually, attributes that are needed to be present along the
redeclaration chain are attached during ASTReading from
ASTDeclReader::attachPreviousDecl, but no such thing is done for inheritable
attributes. Currently, only the logic for merging MSInheritanceAttr is
provided.
Currently ConstantExpr::getWithOperands does not handle FNeg and
subsequently treats FNeg as binary operator, leading to an assertion
failure or segmentation fault if built without assertions.
Originally I reproduced this with llvm-dis on a bitcode file, which I
unfortunately cannot share and also cannot really reduce.
But PR45426 describes the same issue and has a reproducer with Clang, so
I'll go with that.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86274
This patch is the initial support for the Intial Exec Thread Local
Local Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D81947
Recommit the patch after fixing an issue reported caused by the fact
that re-used values are also added to InsertedValues.
Additional tests have been added in 88818491b9
This reverts the revert commit 38884641f2.
D81347 changes the ASTFileSignature to be an array of 20 uint8_t instead of 5
uint32_t. However, it didn't update the code in ObjectFilePCHContainerOperations
that creates the dwoID in the module from the ASTFileSignature
(`Buffer->Signature` being the array subclass that is now `std::array<uint8_t,
20>` instead of `std::array<uint32_t, 5>`).
```
uint64_t Signature = [..] (uint64_t)Buffer->Signature[1] << 32 | Buffer->Signature[0]
```
This code works with the old ASTFileSignature (where two uint32_t are enough to
fill the uint64_t), but after the patch this only took two bytes from the
ASTFileSignature and only partly filled the Signature uint64_t.
This caused that the dwoID in the module ref and the dwoID in the actual module
no longer match (which in turns causes that LLDB keeps warning about the dwoID's
not matching when debugging -gmodules-compiled binaries).
This patch just unifies the logic for turning the ASTFileSignature into an
uint64_t which makes the dwoID match again (and should prevent issues like that
in the future).
Reviewed By: aprantl, dang
Differential Revision: https://reviews.llvm.org/D84013
The testing in merged.test is not ideal.
It uses the following set of flags: `-aeWhSrnudlVgIs`
and the precompiled object `trivial.obj.elf-i386`.
In fact, this object, for example, does not contain versioning stuff,
so specifying `-V` does not make much sense for it, so it is not really tested.
Also, we want to avoid using of precompiled objects, ideally we
want to use a YAML that triggers an output for each of the short options in use:
```
-a: --all
-e: --headers
-W: --wide
-h: --file-headers, --file-header
-S: --section-headers, --sections
-r: --relocations
-n: --notes
-u: --unwind
-d: --dynamic-table
-l: --program-headers
-V: --version-info
-g: --elf-section-groups
-I: --elf-hash-histogram
-s: --symbols
```
Note that, for example, we do not need to have groups to test `-g`, because for a
object with no groups llvm-readelf still prints "There are no section groups in this file.",
but that is not always the case. E.g. for `-d` we don't print anything when we have
no dynamic table, so we have to describe it in a YAML to test `-d` properly.
Also, we probably want to test cases with and without `-a`(-all) option separately
to be sure that we handle all options and not only the first one in the sequence.
Differential revision: https://reviews.llvm.org/D86283
D80465 added an assembly implementation of muldi3 for RISC-V but it didn't
add it to the cmake `*_SOURCES` list, so the C implementation was being used
instead. This patch fixes that.
Differential Revision: https://reviews.llvm.org/D86036
The code that reports "PT_DYNAMIC segment offset + size exceeds the size of the file"
has an issue: it is possible to bypass the validation by overflowing the size + offset result.
Differential revision: https://reviews.llvm.org/D85519
Our handling of PC-Relative addressing is currently broken with
Fast ISel in 3 ways:
- FISel emits calls without handling all the PC-Rel intricacies
- FISel materializes FP constants through the TOC
- FISel materializes GV's through the TOC
As it would be unnecessarily tedious to implement all the handling
for PC-Rel in Fast ISel, we will turn off FISel for anything that
generates references to the TOC.
Summary of changes:
- added description of MTBUF instructions and format modifier;
- described limitations of f16 inline constants when used with integer operands;
- updated description of gfx9+ flat global addressing modes;
- v_accvgpr_write_b32 src0 corrections (gfx908);
- minor bugfixing and improvements.
This can happen when building implicit modules, as demonstrated in test.
The CompilerInstance uses the same StoredDiags, but different
SourceManager. This used to crash clangd when it tried to relocate the
diagnostic to the main file, which, according to SourceManager from the
diagnostic, is a fake <module-includes> file.
Differential Revision: https://reviews.llvm.org/D85753
The original commit (7ff0ace96db9164dcde232c36cab6519ea4fce8) was causing
build failure and was reverted in 6d242a7326
==================== Original Commit Message ====================
This patch adds support for referencing different abbrev tables. We use
'ID' to distinguish abbrev tables and use 'AbbrevTableID' to explicitly
assign an abbrev table to compilation units.
The syntax is:
```
debug_abbrev:
- ID: 0
Table:
...
- ID: 1
Table:
...
debug_info:
- ...
AbbrevTableID: 1 ## Reference the second abbrev table.
- ...
AbbrevTableID: 0 ## Reference the first abbrev table.
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83116
PseudoBRIND had seemingly inherited incorrect annotations denoting it as
a call instruction and that it defines X1/ra. This caused excess
save/restore code to be emitted for ra.
Differential Revision: https://reviews.llvm.org/D86286
Do not break down local loads and stores so ds_read/write_b96/b128 in
ISelLowering can be selected on subtargets that support them and if align
requirements allow them.
Differential Revision: https://reviews.llvm.org/D84403
Fix local ds_read/write_b96/b128 so they can be selected if the alignment
allows. Otherwise, either pick appropriate ds_read2/write2 instructions or break
them down.
Differential Revision: https://reviews.llvm.org/D81638
Features UnalignedBufferAccess and UnalignedDSAccess are now used to determine
whether hardware supports such access.
UnalignedAccessMode should be used to enable them.
hasUnalignedBufferAccessEnabled() and hasUnalignedDSAccessEnabled() can be
now used to quickly check both.
Differential Revision: https://reviews.llvm.org/D84522
Adjust alignment requirements for ds_read/write_b96/b128.
GFX9 and onwards allow misaligned access for reads and writes but only if
SH_MEM_CONFIG.alignment_mode allows it.
UnalignedDSAccess is set on GCN subtargets from GFX9 onward to let us know if we
can relax alignment requirements.
UnalignedAccessMode acts similary to UnalignedBufferAccess for DS instructions
but only from GFX9 onward and is supposed to match alignment_mode. By default
alignment of 4 is required.
Differential Revision: https://reviews.llvm.org/D82788
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
Both AfterPass and AfterPassInvalidated pass instrumentation
callbacks get additional parameter of type PreservedAnalyses.
This patch was created by @fedor.sergeev. I have just slightly
changed it.
Reviewers: fedor.sergeev
Differential Revision: https://reviews.llvm.org/D81555
Before we speculatively execute a basic block, query the cost of
inserting the necessary select instructions against the phi folding
threshold. For non-trivial insertions, a more accurate decision can
probably be made during machine if-conversion. With minsize we query
the CodeSize cost, otherwise we use SizeAndLatency.
Differential Revision: https://reviews.llvm.org/D82438
1. Complete `process load` with the common disk file completion, so there is not test provided for it;
2. Complete `process unload` with the tokens of valid loaded images.
Thanks for Raphael's help on the test for `process unload`.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D79887
Currently we have `checkDRI` and two `createDRIFrom` methods which
are used to create `DynRegionInfo` objects.
And we have an issue: constructions like:
`ObjF->getELFFile()->base() + P->p_offset`
that are used in `createDRIFrom` functions might overflow.
I had to revert `D85519` which triggered such UBSan failure.
This NFC, simplifies and generalizes how we create `DynRegionInfo` objects.
It will allow us to introduce more/better validation checks in a single place.
It also will allow to change `createDRI` to return `Expected<>` so
that we will be able to stop using the `reportError`, which
is used inside currently, and have a warning instead.
Differential revision: https://reviews.llvm.org/D86297
Modify the ARM getCmpSelInstrCost implementation for the code size
costs of selects. Now consider the legalization cost and increase
the cost of i1 because those values wouldn't live in a general purpose
register. We also make selects +1 more expensive to account for the IT
instruction.
Differential Revision: https://reviews.llvm.org/D82091
As part of D84741, this adds a target hook for the
preferPredicatedReductionSelect option and makes use
of it under MVE, allowing us to tail predicate most
reduction loops.
Differential Revision: https://reviews.llvm.org/D85980
Commit dbcfbffc adds ppc.readflm and ppc.setflm intrinsics to read or
write FPSCR register. This patch adds them to Clang.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D85874
Instead of ANDing with a one hot mask representing the bit to
be tested, we were ANDing with just the bit number. This tests
multiple bits none of them the correct one.
This caused skylake-avx512, cascadelake and cooperlake to all
be misdetected. Based on experiments with the Intel SDE, it seems
that all of these CPUs are being detected as being cooperlake.
This is bad since its the newest CPU of the 3.
In e99dee82b0, the "out_of_memory_new_handler" was changed to be
explicitly initialized instead of relying on a global static
constructor.
However before this change, install_out_of_memory_new_handler could be
called multiple times while it asserts right now.
We can be more tolerant to calling multiple time InitLLVM without
reintroducing a global constructor for this handler.
Differential Revision: https://reviews.llvm.org/D86330
