Previously, if no column was specified, ResolveSymbolContext would take
the first match returned by FindLineEntryIndexByFileIndex, and reuse it
to find subsequent exact matches. With the introduction of columns, columns
are now considered when matching the line entries.
This leads to a problem if one wants to get all existing line entries
that match that line, since now the column is also used for the exact match.
This way, all line entries are filtered out that have a different
column number, but the same line number.
This patch changes that by ignoring the column information of the first match
if the original request of ResolveSymbolContext was also ignoring it.
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D108816
If we encounter a new debug value, describing the same parameter,
we should stop tracking the parameter's Entry Value. At that point,
in some cases, the Transfer which uses the parameter's Entry Value,
is already emitted. Thanks to the RemoveRedundantDebugValues pass,
many problems with incorrect instruction order and number of DBG_VALUEs
are fixed. However, we still cannot rely on the rule that each new
debug value is set by the previous non-debug instruction in Machine
Basic Block.
When new parameter debug value triggers removal of Backup Entry Value
for the same parameter, do the cleanup of Transfers emitted from Backup
Entry Values. Get the Transfer Instruction which created the new debug
value and search for debug values already emitted from the to-be-deleted
Backup Entry Value and attached to the Transfer Instruction. If found,
delete the Transfer and remove "primary" Entry Value Var Loc from
OpenRanges.
This patch fixes PR47628.
Patch by Nikola Tesic.
Differential revision: https://reviews.llvm.org/D106856
Clang only adds GCC paths for RHEL <= 7 'devtoolset-<N>' Software
Collections (SCL). This generalizes this support to also include the
'gcc-toolset-10' SCL in RHEL/CentOS 8.
Reviewed By: stephan.dollberg
Differential Revision: https://reviews.llvm.org/D108908
The GLM/SLM special cases still get tested first but after the the MUL/DIV/REM pattern detection - this will be necessary for when we make the SLM vXi32 MUL canonicalization generic to improve PMULLW/PMULHW/PMADDDW cost support etc.
Previously, we'd expand *ALL* the SCEV's eagerly, because we needed to
check with `isValidRewrite()`, and discard bad rewrite candidates,
but now that we do not do that, we also don't need to always expand.
In particular, this avoids expanding potentially-huge SCEV's that we
would discard anyways because they are high-cost and we aren't
rewriting aggressively.
41d4aa7de6 introduced incorrect code in
extraTraitClassDeclaration: `this` refers to the trait class and not the
operation class so `->getContext()` is not valid. Use `$_op` instead.
`isValidRewrite()` checks that the both the original SCEV,
and the rewrite SCEV have the same base pointer.
I //believe//, after all the recent SCEV improvements,
this invariant is already enforced by SCEV itself.
I originally tried changing it into an assert in D108043,
but that showed that it triggers on e.g. https://reviews.llvm.org/D108043#2946621,
where SCEV manages to forward the store to load,
test added.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D108655
Add a support for handling fork/vfork stops in LLGS client. At this
point, it only sends a detach packet for the newly forked child
(and implicitly resumes the parent).
Differential Revision: https://reviews.llvm.org/D100206
This patch emits DW_TAG_namelist and DW_TAG_namelist_item for fortran
namelist variables. DICompositeType is extended to support this fortran
feature.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D108553
GET_COMMAND_ARGUMENT takes a lot of optional arguments: VALUE, LENGTH,
STATUS and ERRMSG. This patch breaks up the interface into 2 different
functions:
* One for getting the LENGTH of an argument.
* One for getting the VALUE and the ERRMSG of an argument. This returns
the STATUS, which can be easily ignored by lowering if it is missing in
the invocation.
Differential Revision: https://reviews.llvm.org/D108688
After applying VPlan-to-VPlan transformations, using IR references to
query VPlan values may be incorrect, as the IR is not in sync with the
VPlan any longer.
To better detect such mis-matches, this patch introduces a new flag to
VPlans to indicate whether it is safe to query VPValues using IR values.
getVPValue is updated to assert if it is called when the flag indicates
it is not safe any longer.
There is an escape hatch via an extra argument, because there are 3
places that need to be fixed first. Those are
1. truncateToMinimalBitwidths
2. clearReductionWrapFlags
3. fixLCSSAPHIs
As a first step, this flag will help preventing new code from violating
this property.
Any suggestions with respect to naming very welcome!
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D108573
This tutorial will guide you through the process of making a change to LLVM, and contributing it back to the LLVM project.
We'll be making a change to Clang, but the steps for other parts of LLVM are the same. Even though the change we'll be making is simple,
we're going to cover steps like building LLVM, running the tests, and code review. This is good practice, and you'll be prepared for making larger changes.
Authors: @meikeb , @gribozavr
Commit: Zhiqian Xia
PS - This is a duplicate revision of https://reviews.llvm.org/D100714 which was actually used for patch review.
Reviewed By: kuhnel
Differential Revision: https://reviews.llvm.org/D108267
The double precision KindCode was ignored when building the interface
of specific intrinsic procedures leading to bad semantics checks.
Differential Revision: https://reviews.llvm.org/D108828
SymbolRefAttr is fundamentally a base string plus a sequence
of nested references. Instead of storing the string data as
a copies StringRef, store it as an already-uniqued StringAttr.
This makes a lot of things simpler and more efficient because:
1) references to the symbol are already stored as StringAttr's:
there is no need to copy the string data into MLIRContext
multiple times.
2) This allows pointer comparisons instead of string
comparisons (or redundant uniquing) within SymbolTable.cpp.
3) This allows SymbolTable to hold a DenseMap instead of a
StringMap (which again copies the string data and slows
lookup).
This is a moderately invasive patch, so I kept a lot of
compatibility APIs around. It would be nice to explore changing
getName() to return a StringAttr for example (right now you have
to use getNameAttr()), and eliminate things like the StringRef
version of getSymbol.
Differential Revision: https://reviews.llvm.org/D108899
PowerPC can model these instructions, so we don't need this flag set.
Reviewed By: shchenz, jsji
Differential Revision: https://reviews.llvm.org/D71983
* Add `DimOfIterArgFolder`.
* Move existing cross-dialect canonicalization patterns to `LoopCanonicalization.cpp`.
* Rename `SCFAffineOpCanonicalization` pass to `SCFForLoopCanonicalization`.
* Expand documentaton of scf.for: The type of loop-carried variables may not change with iterations. (Not even the dynamic type.)
Differential Revision: https://reviews.llvm.org/D108806
The "aligned" attribute can only increase the alignment of a struct, or struct member, unless it's used together with the "packed" attribute, or used as a part of a typedef, in which case, the "aligned" attribute can both increase and decrease alignment.
That said, we expect:
1. "aligned" attribute alone: does not interfere with the alignment upgrade instrumented by the AIX "power" alignment rule,
2. "aligned" attribute + typedef: overrides any computed alignment,
3. "aligned" attribute + "packed" attribute: overrides any computed alignment.
The old implementation achieved 2 and 3, but didn't get 1 right, in that any field marked attribute "aligned" would not go through the alignment upgrade.
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D107394
* Add batched version of all `addId` variants, so that multiple IDs can be added at a time.
* Rename `addId` and variants to `insertId` and `appendId`. Most external users call `appendId`. Splitting `addId` into two functions also makes it possible to provide batched version for both. (Otherwise, the overloads are ambigious when calling `addId`.)
Differential Revision: https://reviews.llvm.org/D108532
We cannot leak any equivalency information by comparing against null
since null never has virtual metadata associated with it (when null is
not a valid dereferenceable pointer).
Instcombine seems to make sure that a null will be on the RHS, so we
don't have to check both operands.
This fixes a missed optimization in llvm-test-suite's MultiSource lambda
benchmark under -fstrict-vtable-pointers.
Reviewed By: Prazek
Differential Revision: https://reviews.llvm.org/D108734
Add backward compatibility tests for mapping the deprecated
ConstructorInitializerAllOnOneLineOrOnePerLine and
AllowAllConstructorInitializersOnNextLine to
PackConstructorInitializers.
Differential Revision: https://reviews.llvm.org/D108882
ExposePointerBase() in SCEVExpander implements basically the same
functionality as removePointerBase() in SCEV, so reuse it.
The SCEVExpander code assumes that the pointer operand on adds is
the last one -- I'm not sure that always holds. As such this might
not be strictly NFC.
There can only be one pointer operand in an add expression, and
we have sorted operands to guarantee that it is the first. As
such, the pointer check for other operands is dead code.
Remove method X86LowerAMXType::getRowFromCol since it's not used, and
it's causing a warning.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D108862
It is currently possible to register a frame recognizer, but it will be applied if and only if the frame's PC points to the very first instruction of the specified function, which limits usability of this feature.
The implementation already supports changing this behaviour by passing an additional flag, but it's not possible to set it via the command interface. Fix that.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D108510
