c8h4/btrfs-progs
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
btrfs-progs/Makefile
Mark Fasheh 96ec888aad btrfs-progs: add quota group verify code 
This patch adds functionality (in qgroup-verify.c) to compute bytecounts in
subvolume quota groups. The original groups are read in and stored in memory
so that after we compute our own bytecounts, we can compare them with those
on disk. A print function is provided to do this comparison and show the
results on the console.

A 'qgroup check' pass is added to btrfsck. If any subvolume quota groups
differ from what we compute, the differences for them are printed.  We also
provide an option '--qgroup-report' which will run only the quota check code
and print a report on all quota groups.  Other than making it possible to
verify that our qgroup changes work correctly, this mode can also be used in
xfstests for automated checking after qgroup tests.

This patch does not address the following:
- compressed counts are identical to non compressed, because kernel doesn't
  make the distinction yet.  Adding the code to verify compressed counts
  shouldn't be hard at all though once kernel can do this.
- It is only concerned with subvolume quota groups (like most of
  btrfs-progs).

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.cz>
2014-08-22 14:39:33 +02:00

263 lines
8.8 KiB
Makefile
Raw Blame History

# Export all variables to sub-makes by default
export
CC = gcc
LN = ln
AR = ar
AM_CFLAGS = -Wall -D_FILE_OFFSET_BITS=64 -DBTRFS_FLAT_INCLUDES -fno-strict-aliasing -fPIC
CFLAGS = -g -O1 -fno-strict-aliasing
objects = ctree.o disk-io.o radix-tree.o extent-tree.o print-tree.o \
root-tree.o dir-item.o file-item.o inode-item.o inode-map.o \
extent-cache.o extent_io.o volumes.o utils.o repair.o \
qgroup.o raid6.o free-space-cache.o list_sort.o props.o \
utils-lib.o ulist.o qgroup-verify.o
cmds_objects = cmds-subvolume.o cmds-filesystem.o cmds-device.o cmds-scrub.o \
cmds-inspect.o cmds-balance.o cmds-send.o cmds-receive.o \
cmds-quota.o cmds-qgroup.o cmds-replace.o cmds-check.o \
cmds-restore.o cmds-rescue.o chunk-recover.o super-recover.o \
cmds-property.o
libbtrfs_objects = send-stream.o send-utils.o rbtree.o btrfs-list.o crc32c.o \
uuid-tree.o utils-lib.o
libbtrfs_headers = send-stream.h send-utils.h send.h rbtree.h btrfs-list.h \
crc32c.h list.h kerncompat.h radix-tree.h extent-cache.h \
extent_io.h ioctl.h ctree.h btrfsck.h
TESTS = fsck-tests.sh
INSTALL = install
prefix ?= /usr/local
bindir = $(prefix)/bin
lib_LIBS = -luuid -lblkid -lm -lz -llzo2 -L.
libdir ?= $(prefix)/lib
incdir = $(prefix)/include/btrfs
LIBS = $(lib_LIBS) $(libs_static)
ifeq ("$(origin V)", "command line")
BUILD_VERBOSE = $(V)
endif
ifndef BUILD_VERBOSE
BUILD_VERBOSE = 0
endif
ifeq ($(BUILD_VERBOSE),1)
Q =
else
Q = @
endif
MAKEOPTS = --no-print-directory Q=$(Q)
progs = mkfs.btrfs btrfs-debug-tree btrfsck \
btrfs btrfs-map-logical btrfs-image btrfs-zero-log btrfs-convert \
btrfs-find-root btrfstune btrfs-show-super
# external libs required by various binaries; for btrfs-foo,
# specify btrfs_foo_libs = <list of libs>; see $($(subst...)) rules below
btrfs_convert_libs = -lext2fs -lcom_err
btrfs_image_libs = -lpthread
btrfs_fragments_libs = -lgd -lpng -ljpeg -lfreetype
SUBDIRS =
BUILDDIRS = $(patsubst %,build-%,$(SUBDIRS)) build-Documentation
INSTALLDIRS = $(patsubst %,install-%,$(SUBDIRS)) install-Documentation
CLEANDIRS = $(patsubst %,clean-%,$(SUBDIRS))
.PHONY: $(SUBDIRS)
.PHONY: $(BUILDDIRS)
.PHONY: $(INSTALLDIRS)
.PHONY: $(TESTDIRS)
.PHONY: $(CLEANDIRS)
.PHONY: all install clean
# Create all the static targets
static_objects = $(patsubst %.o, %.static.o, $(objects))
static_cmds_objects = $(patsubst %.o, %.static.o, $(cmds_objects))
static_libbtrfs_objects = $(patsubst %.o, %.static.o, $(libbtrfs_objects))
# Define static compilation flags
STATIC_CFLAGS = $(CFLAGS) -ffunction-sections -fdata-sections
STATIC_LDFLAGS = -static -Wl,--gc-sections
STATIC_LIBS = $(lib_LIBS) -lpthread
libs_shared = libbtrfs.so.0.1
libs_static = libbtrfs.a
libs = $(libs_shared) $(libs_static)
lib_links = libbtrfs.so.0 libbtrfs.so
headers = $(libbtrfs_headers)
# make C=1 to enable sparse
check_defs := .cc-defines.h
ifdef C
#
# We're trying to use sparse against glibc headers which go wild
# trying to use internal compiler macros to test features. We
# copy gcc's and give them to sparse. But not __SIZE_TYPE__
# 'cause sparse defines that one.
#
dummy := $(shell $(CC) -dM -E -x c - < /dev/null | \
grep -v __SIZE_TYPE__ > $(check_defs))
check = sparse -include $(check_defs) -D__CHECKER__ \
-D__CHECK_ENDIAN__ -Wbitwise -Wuninitialized -Wshadow -Wundef
check_echo = echo
# don't use FORTIFY with sparse because glibc with FORTIFY can
# generate so many sparse errors that sparse stops parsing,
# which masks real errors that we want to see.
else
check = true
check_echo = true
AM_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2
endif
%.o.d: %.c
$(Q)$(CC) -MM -MG -MF $@ -MT $(@:.o.d=.o) -MT $(@:.o.d=.static.o) -MT $@ $(AM_CFLAGS) $(CFLAGS) $<
.c.o:
@$(check_echo) " [SP] $<"
$(Q)$(check) $(AM_CFLAGS) $(CFLAGS) $<
@echo " [CC] $@"
$(Q)$(CC) $(AM_CFLAGS) $(CFLAGS) -c $<
%.static.o: %.c
@echo " [CC] $@"
$(Q)$(CC) $(AM_CFLAGS) $(STATIC_CFLAGS) -c $< -o $@
all: $(progs) $(BUILDDIRS)
$(SUBDIRS): $(BUILDDIRS)
$(BUILDDIRS):
@echo "Making all in $(patsubst build-%,%,$@)"
$(Q)$(MAKE) $(MAKEOPTS) -C $(patsubst build-%,%,$@)
test:
$(Q)for t in $(TESTS); do \
echo " [TEST] $$t"; \
bash tests/$$t || exit 1; \
done
#
# NOTE: For static compiles, you need to have all the required libs
# static equivalent available
#
static: btrfs.static mkfs.btrfs.static btrfs-find-root.static
version.h:
@echo " [SH] $@"
$(Q)bash version.sh
$(libs_shared): $(libbtrfs_objects) $(lib_links) send.h
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) $(libbtrfs_objects) $(LDFLAGS) $(lib_LIBS) \
-shared -Wl,-soname,libbtrfs.so.0 -o libbtrfs.so.0.1
$(libs_static): $(libbtrfs_objects)
@echo " [AR] $@"
$(Q)$(AR) cru libbtrfs.a $(libbtrfs_objects)
$(lib_links):
@echo " [LN] $@"
$(Q)$(LN) -sf libbtrfs.so.0.1 libbtrfs.so.0
$(Q)$(LN) -sf libbtrfs.so.0.1 libbtrfs.so
# keep intermediate files from the below implicit rules around
.PRECIOUS: $(addsuffix .o,$(progs))
# Make any btrfs-foo out of btrfs-foo.o, with appropriate libs.
# The $($(subst...)) bits below takes the btrfs_*_libs definitions above and
# turns them into a list of libraries to link against if they exist
#
# For static variants, use an extra $(subst) to get rid of the ".static"
# from the target name before translating to list of libs
btrfs-%.static: $(static_objects) btrfs-%.static.o $(static_libbtrfs_objects)
@echo " [LD] $@"
$(Q)$(CC) $(STATIC_CFLAGS) -o $@ $@.o $(static_objects) \
$(static_libbtrfs_objects) $(STATIC_LDFLAGS) $(STATIC_LIBS) \
$($(subst -,_,$(subst .static,,$@)-libs))
btrfs-%: $(objects) $(libs) btrfs-%.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o $@ $(objects) $@.o $(LDFLAGS) $(LIBS) $($(subst -,_,$@-libs))
btrfs: $(objects) btrfs.o help.o $(cmds_objects) $(libs)
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o btrfs btrfs.o help.o $(cmds_objects) \
$(objects) $(LDFLAGS) $(LIBS) -lpthread
btrfs.static: $(static_objects) btrfs.static.o help.static.o $(static_cmds_objects) $(static_libbtrfs_objects)
@echo " [LD] $@"
$(Q)$(CC) $(STATIC_CFLAGS) -o btrfs.static btrfs.static.o help.static.o $(static_cmds_objects) \
$(static_objects) $(static_libbtrfs_objects) $(STATIC_LDFLAGS) $(STATIC_LIBS)
# For backward compatibility, 'btrfs' changes behaviour to fsck if it's named 'btrfsck'
btrfsck: btrfs
@echo " [LN] $@"
$(Q)$(LN) -f btrfs btrfsck
mkfs.btrfs: $(objects) $(libs) mkfs.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o mkfs.btrfs $(objects) mkfs.o $(LDFLAGS) $(LIBS)
mkfs.btrfs.static: $(static_objects) mkfs.static.o $(static_libbtrfs_objects)
@echo " [LD] $@"
$(Q)$(CC) $(STATIC_CFLAGS) -o mkfs.btrfs.static mkfs.static.o $(static_objects) \
$(static_libbtrfs_objects) $(STATIC_LDFLAGS) $(STATIC_LIBS)
btrfstune: $(objects) $(libs) btrfstune.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o btrfstune $(objects) btrfstune.o $(LDFLAGS) $(LIBS)
dir-test: $(objects) $(libs) dir-test.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o dir-test $(objects) dir-test.o $(LDFLAGS) $(LIBS)
quick-test: $(objects) $(libs) quick-test.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o quick-test $(objects) quick-test.o $(LDFLAGS) $(LIBS)
ioctl-test: $(objects) $(libs) ioctl-test.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o ioctl-test $(objects) ioctl-test.o $(LDFLAGS) $(LIBS)
send-test: $(objects) $(libs) send-test.o
@echo " [LD] $@"
$(Q)$(CC) $(CFLAGS) -o send-test $(objects) send-test.o $(LDFLAGS) $(LIBS) -lpthread
manpages:
$(Q)$(MAKE) $(MAKEOPTS) -C Documentation
clean-all: clean-doc clean
clean: $(CLEANDIRS)
@echo "Cleaning"
$(Q)rm -f $(progs) cscope.out *.o *.o.d btrfs-convert btrfs-image btrfs-select-super \
btrfs-zero-log btrfstune dir-test ioctl-test quick-test send-test btrfsck \
btrfs.static mkfs.btrfs.static btrfs-calc-size \
version.h $(check_defs) \
$(libs) $(lib_links)
clean-doc:
@echo "Cleaning Documentation"
$(Q)$(MAKE) $(MAKEOPTS) -C Documentation clean
$(CLEANDIRS):
@echo "Cleaning $(patsubst clean-%,%,$@)"
$(Q)$(MAKE) $(MAKEOPTS) -C $(patsubst clean-%,%,$@) clean
install: $(libs) $(progs) $(INSTALLDIRS)
$(INSTALL) -m755 -d $(DESTDIR)$(bindir)
$(INSTALL) $(progs) $(DESTDIR)$(bindir)
$(INSTALL) fsck.btrfs $(DESTDIR)$(bindir)
# btrfsck is a link to btrfs in the src tree, make it so for installed file as well
$(LN) -f $(DESTDIR)$(bindir)/btrfs $(DESTDIR)$(bindir)/btrfsck
$(INSTALL) -m755 -d $(DESTDIR)$(libdir)
$(INSTALL) $(libs) $(DESTDIR)$(libdir)
cp -a $(lib_links) $(DESTDIR)$(libdir)
$(INSTALL) -m755 -d $(DESTDIR)$(incdir)
$(INSTALL) -m644 $(headers) $(DESTDIR)$(incdir)
$(INSTALLDIRS):
@echo "Making install in $(patsubst install-%,%,$@)"
$(Q)$(MAKE) $(MAKEOPTS) -C $(patsubst install-%,%,$@) install
ifneq ($(MAKECMDGOALS),clean)
-include $(objects:.o=.o.d) $(cmd-objects:.o=.o.d) $(subst .btrfs,, $(filter-out btrfsck.o.d, $(progs:=.o.d)))
endif
Reference in a new issue View git blame Copy permalink