c6be84840f
The feature pages share the contents with the manual page section 5 so put the contents to separate files. Progress: 2/3. Signed-off-by: David Sterba <dsterba@suse.com>
29 lines
1.5 KiB
ReStructuredText
29 lines
1.5 KiB
ReStructuredText
Scrub is a pass over all filesystem data and metadata and verifying the
|
|
checksums. If a valid copy is available (replicated block group profiles) then
|
|
the damaged one is repaired. All copies of the replicated profiles are validated.
|
|
|
|
.. note::
|
|
Scrub is not a filesystem checker (fsck) and does not verify nor repair
|
|
structural damage in the filesystem. It really only checks checksums of data
|
|
and tree blocks, it doesn't ensure the content of tree blocks is valid and
|
|
consistent. There's some validation performed when metadata blocks are read
|
|
from disk but it's not extensive and cannot substitute full *btrfs check*
|
|
run.
|
|
|
|
The user is supposed to run it manually or via a periodic system service. The
|
|
recommended period is a month but could be less. The estimated device bandwidth
|
|
utilization is about 80% on an idle filesystem. The IO priority class is by
|
|
default *idle* so background scrub should not significantly interfere with
|
|
normal filesystem operation. The IO scheduler set for the device(s) might not
|
|
support the priority classes though.
|
|
|
|
The scrubbing status is recorded in */var/lib/btrfs/* in textual files named
|
|
*scrub.status.UUID* for a filesystem identified by the given UUID. (Progress
|
|
state is communicated through a named pipe in file *scrub.progress.UUID* in the
|
|
same directory.) The status file is updated every 5 seconds. A resumed scrub
|
|
will continue from the last saved position.
|
|
|
|
Scrub can be started only on a mounted filesystem, though it's possible to
|
|
scrub only a selected device. See **btrfs scrub start** for more.
|
|
|