Kernel commit efc0e69c2fea ("btrfs: introduce exclusive operation
BALANCE_PAUSED state") allows to start a device add when there's a
paused balance, eg. to let the balance finish when there's not enough
chunk space. Add the support for that, though this needs an updated
kernel to export the 'balance paused' in sysfs.
Signed-off-by: David Sterba <dsterba@suse.com>
We need to make sure we process the block group root, and mark its
blocks as used for the free space tree checking.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fuzz-test/003 was infinite looping when I reworked the code to
re-calculate the used bytes for the superblock. This is because fsck
wasn't properly fixing the bad extent before my change, it just happened
to error out nicely, whereas my change made it so we go the wrong bytes
used count and just infinite looped trying to fix the problem.
Fix this by sanity checking the extent when we try to re-calculate the
bytes_used. This makes us no longer infinite loop so we can get through
the fuzz tests.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to enable developers to test the extent tree v2 features as they
are added, add the ability to mkfs an extent tree v2 fs if we have
experimental enabled.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We could have multiple extent roots, so add a helper to mark all the
used space in the FS based on any extent roots we find, and then use
this extent io tree to fixup the block group accounting.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we switch to multiple global trees we'll need to access the
appropriate extent root depending on the block group or possibly root.
To handle this, use a helper in most places and then the actual root in
places where it is required. We will whittle down the direct accessors
with future patches, but this does the bulk of the preparatory work.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_mark_used_tree_blocks skips the reloc roots for some reason, which
causes problems because these blocks are in use, and we use this helper
to determine if the block accounting is correct with extent tree v2.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is going to be used for the extent tree v2 stuff more commonly, so
move it out so that it is accessible from everywhere that we need it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this helper sitting in extent-tree.c, but it's a repair
function. I'm going to need to make changes to this for extent-tree-v2
and would rather this live outside of the code we need to share with the
kernel.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
mkfs.btrfs v5.15 outputs a message even if the disk is a HDD without
TRIM/DISCARD support:
Performing full device TRIM /dev/sdc2 (326.03GiB) ...
[CAUSE]
mkfs.btrfs check TRIM/DISCARD support through the content of
queue/discard_granularity, but compare it against a wrong value.
When HDD without TRIM/DISCARD support, the content of
queue/discard_granularity is '0' '\n' '\0', rather than '0' '\0'.
[FIX]
- compare the value based on atoi() to provide more robustness
- delete unnecessary '\n' in pr_verbose()
Fixes: c50c448518 ("btrfs-progs: do sysfs detection of device discard capability")
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a lot of call sites where we use the following code snippet:
u8 super_block_data[BTRFS_SUPER_INFO_SIZE];
struct btrfs_super_block *sb;
u64 ret;
sb = (struct btrfs_super_block *)super_block_data;
The reason for this is, structure btrfs_super_block was smaller than
BTRFS_SUPER_INFO_SIZE.
Thus for anything with csum involved, we have to use a proper 4K buffer.
Since the recent unification of sizeof(struct btrfs_super_block), we no
longer need such workaround, and can use struct btrfs_super_block
directly to do any operation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Since commit dad03fac3b ("btrfs-progs: switch btrfs_group_profile_str
to use raid table"), fstests/btrfs/023 and btrfs/151 will always fail.
The failure of btrfs/151 explains the reason pretty well:
btrfs/151 1s ... - output mismatch
--- tests/btrfs/151.out 2019-10-22 15:18:14.068965341 +0800
+++ ~/xfstests-dev/results//btrfs/151.out.bad 2021-11-02 17:13:43.879999994 +0800
@@ -1,2 +1,2 @@
QA output created by 151
-Data, RAID1
+Data, raid1
...
(Run 'diff -u ~/xfstests-dev/tests/btrfs/151.out ~/xfstests-dev/results//btrfs/151.out.bad' to see the entire diff)
[CAUSE]
Commit dad03fac3b ("btrfs-progs: switch btrfs_group_profile_str to use
raid table") will use btrfs_raid_array[index].raid_name, which is all
lower case.
[FIX]
There is no need to bring such output format change.
So here we split the btrfs_raid_attr::raid_name[] into upper_name[] and
lower_name[], and make upper and lower case helpers for callers to use.
Now there are several types of callers referring to lower_name and
upper_name:
- parse_bg_profile()
It uses strcasecmp(), either case would be fine.
- btrfs_group_profile_str()
Originally it uses upper case for all profiles except "single".
Now unified to upper case.
- sprint_profiles()
It uses lower case.
- bg_flags_to_str()
It uses upper case.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit ("btrfs-progs: switch btrfs_group_profile_str to use raid table")
introduced a regression that raid profile of GlobalReserve will be
printed as 'unknown'.
$ btrfs filesystem df /mnt/test
Data, single: total=5.02TiB, used=4.98TiB
System, single: total=4.00MiB, used=624.00KiB
Metadata, single: total=11.01GiB, used=6.94GiB
GlobalReserve, unknown: total=512.00MiB, used=0.00B
Fix it by:
- take BTRFS_BLOCK_GROUP_RESERVED into account when masking the block
group flags
- update the define of BTRFS_BLOCK_GROUP_RESERVED too so it's same as in
kernel
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Kernel emits inode number for all mkfile/mkdir/... commands but the
receive part does not pass it to the callbacks. At least document that
and read it from the stream in case we'd like to use it in the future.
Signed-off-by: David Sterba <dsterba@suse.com>
Use the raid table helper to avoid hard coding profiles for the given
number of devices in test_num_disk_vs_raid.
Signed-off-by: David Sterba <dsterba@suse.com>
Another duplication of the raid table, in this case missing the changes
to raid10 and raid0 minimum devices changed in a177ef7dd4
("btrfs-progs: mkfs: allow degenerate raid0/raid10").
Define and use a helper using the table value.
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pread with btrfs_pread as well.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pwrite with btrfs_pwrite(). It simply calls pwrite() on non-zoned
btrfs (opened without O_DIRECT). On zoned mode (opened with O_DIRECT),
it allocates an aligned bounce buffer, copies the contents and uses it
for direct-IO writing.
Writes in device_zero_blocks() and btrfs_wipe_existing_sb() are a little
tricky. We don't have fs_info on our hands, so use zinfo to determine it
is a zoned device or not.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we cannot create ext*/reiserfs on a zoned device, it is useless to
allow ZONED feature when converting a file system. Drop ZONED flag from
BTRFS_CONVERT_ALLOWED_FEATURES.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Due to ambiguity of error values in the public API subvol_uuid_search,
there was second version added. There's a separate copy in libbtrfs and
we don't have to distinguish in the internal code. All callers check for
IS_ERR and NULL, so we can safely merge the helpers into one.
Signed-off-by: David Sterba <dsterba@suse.com>
After removing uuid search fallback code the structure has become
trivial and copies the fd that all callers have in their context.
Signed-off-by: David Sterba <dsterba@suse.com>
After the uuid search fallback code has been removed, the finit helper
has become empty and can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>
There's a lot of code under BTRFS_COMPAT_SEND_NO_UUID_TREE to support
kernels < 3.12 that don't have uuid tree and the subvolume uuids are
searched in a slow way, building the uuid tree on the userspace side.
As the uuid tree is always created, the fallback code was not exercised
anyway due to 'uuid_tree_existed' check in subvol_uuid_search2.
Delete the code from the internal copy of send-utils. The support still
stays for libbtrfs and will be removed in the future.
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_list_* functions come with some overhead and for simple path
resolution we can use btrfs_subvolid_resolve.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to include this besides btrfs-list.c itself and
subvolume.c that does use the btrfs_list_* API.
Signed-off-by: David Sterba <dsterba@suse.com>
The separate file was needed for libbtrfs in the past to avoid pulling
utils.c in, but this is not needed after recent cleanups.
Signed-off-by: David Sterba <dsterba@suse.com>
The free space tree is a better way to track the free space and has been
tested in the wild for a long time. The backward compatibility is
sufficient, several long term kernels. On-line conversion from v1 to v2
can be done by mount, switching from v2 to v1 can be done by 'btrfs
check'.
Issue: #295
Signed-off-by: David Sterba <dsterba@suse.com>
The no-holes feature reduces consumption of metadata by not representing
file holes. Reducing metadata is a good thing in general, this is the
main goal to enable this by default.
There's a drawback, related to the missing information about holes. The
'check' tool cannot use it to cross-reference extent information and in
some cases may not be able to detect a problem.
The no-hole feature can be also enabled by 'btrfstune -n' on an
unmounted filesystem.
Issue: #405
Signed-off-by: David Sterba <dsterba@suse.com>
The term 'path' is confusing as we normally use it for filesystem paths,
while for multipath it's more related to the physical path by which the
devices are connected (though it also shows up as another path in the
filesystem).
Rename the helper doing the multipath detection so it's clear what path
is meant by that.
Signed-off-by: David Sterba <dsterba@suse.com>
Since libudev doesn't provide a static version of the library for static
build btrfs-progs will have to provide manual fallback. This change does
this by parsing the udev database files hosted at /run/udev/data/.
Under that directory every block device should have a file with the
following name: bMAJ:MIN. So implement the bare minimum code necessary
to parse this file and search for the presence of DM_MULTIPATH_DEVICE_PATH
udev attribute. This could likely be racy since access to the udev
database is done outside of libudev but that's the best that can be
done when implementing this manually and is only for a limited usecase
where static build has to be used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs-progs will happily enumerate any device which has a
btrfs filesystem on it irrespective of its type. For the majority of
use cases that's fine and there haven't been any problems with that.
However, there was a recent report that in multipath scenario when
running "btrfs fi show" after a path flap (path going down and then
coming back up) instead of the multipath device being show the device
which represents the flapped path is shown. So a multipath filesystem
might look like:
Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba
Total devices 1 FS bytes used 192.00KiB
devid 1 size 10.00GiB used 536.00MiB path /dev/mapper/3600140501cc1f49e5364f0093869c763
/dev/mapper/xxx is actually backed by an arbitrary number of paths,
which in turn are presented to the system as ordinary SCSI devices i.e
/dev/sdX. If a path flaps and a user re-runs 'btrfs fi show' the output
would look like:
Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba
Total devices 1 FS bytes used 192.00KiB
devid 1 size 10.00GiB used 536.00MiB path /dev/sdd
This only occurs on unmounted filesystems as those are enumerated by
btrfs-progs, for mounted filesystem the kernel properly deals only with
the actual multipath device.
Turns out the output of this command is consumed by libraries and the
presence of a path device rather than the actual multipath causes
issues.
Fix this by checking for the presence of DM_MULTIPATH_DEVICE_PATH
udev attribute as multipath path devices are tagged with this attribute
by the multipath udev scripts.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The detection of the discard status of a device is done by issuing a
real discard request but on an empty range. This works in most cases.
However there's a case of a VirtualBox driver that returns 'Operation
not supported' in that case, and then discard is skipped during mkfs.
The other tools like fstrim check the sysfs queue file
discard_granularity which is the recommended way. Do that as well.
Issue: #390
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot zone reset a regular file with emulated zones. So, mkfs.btrfs
on such a file causes the following error.
ERROR: zoned: failed to reset device '/home/naota/tmp/btrfs.img' zones: Inappropriate ioctl for device
Introduce btrfs_zoned_device_info->emulated to distinguish the zones are
emulated or not. And, use it to decide it needs zone reset or not.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reading partition size using an ioctl requires the device open, but that
does not work for unprivileged users. This leads to 0 size in device
info structures filled by device_get_partition_size.
As a consequence, this also misreports such devices as missing in 'fi
us' overview:
$ btrfs fi us /
WARNING: cannot read detailed chunk info, per-device usage will not be shown, run as root
Overall:
Device size: 411.35GiB
Device allocated: 53.01GiB
Device unallocated: 358.34GiB
Device missing: 411.35GiB
Used: 31.99GiB
Free (estimated): 379.16GiB (min: 379.16GiB)
Free (statfs, df): 379.35GiB
Data ratio: 1.00
Metadata ratio: 1.00
Global reserve: 194.77MiB (used: 0.00B)
Multiple profiles: no
There should be 0 for 'Device missing'.
Add a fallback to read the device size from sysfs in case the ioctl is
not available.
Issue: #395
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_list_get_path_rootid is exported to libbtrfs so it
needs to stay, but we can inline the implementation.
Signed-off-by: David Sterba <dsterba@suse.com>
The header contains the protocol definitions and is almost exactly the
same as the kernel version, move it to the proper directory.
Signed-off-by: David Sterba <dsterba@suse.com>
The helper open codes what we already have in the raid attr table, so
use it. We assume a valid flags so there's no error value.
Signed-off-by: David Sterba <dsterba@suse.com>
