In a few occasions there's an internal report, make a common helper so
the prefix message is not necessary and the stack trace can be printed
if enabled.
Signed-off-by: David Sterba <dsterba@suse.com>
Process an enable_verity cmd by running the enable verity ioctl on the
file. Since enabling verity denies write access to the file, it is
important that we don't have any open write file descriptors.
This also revs the send stream format to version 3 with no format
changes besides the new commands and attributes. This version is not
finalized and commands may change, also this needs to be synchronized
with any kernel changes.
Note: the build is conditional on the header linux/fsverity.h
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The block group tree doesn't yet have full bi-directional conversion
support from btrfstune, and it seems we may want one or two release
cycles to rule out some extra bugs before really releasing the progs
support.
This patch will hide the block group tree feature behind experimental
flag for the following tools:
- btrfstune
"-b" option to convert to bg tree.
- mkfs.btrfs
hide "block-group-tree" feature from both -O (the new default position
for all features) and -R (the old, soon to be deprecated one).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lots of code still uses fprintf(stderr, "...") that should be the
error() helper. The kernel-shared code is left out of the conversion for
now.
Signed-off-by: David Sterba <dsterba@suse.com>
The tool IWYU (include what you use) suggests to remove and add some
includes. This is only partial to avoid accidental build breakage, the
includes are entangled and will have to be cleaned in the future again.
Signed-off-by: David Sterba <dsterba@suse.com>
The features are split to -O and -R but it does not make much sense from
user POV, there are different levels of compatibility but it does not
need to be selected that way. Merge the tables into one but hide it
behind experimental build until the conversion is complete.
Signed-off-by: David Sterba <dsterba@suse.com>
All files include the <btrfsutil.h> which could be confused with the
system-wide installation. Drop the -I path from build and use full path
for any libbtrfsutil headers.
Signed-off-by: David Sterba <dsterba@suse.com>
The preferred order:
- system headers
- standard headers
- libraries
- kernel library
- kernel shared
- common headers
- other tools
- own headers
Signed-off-by: David Sterba <dsterba@suse.com>
The function csum_tree_block() is not really utilized by anyone, all
current callers just use csum_tree_block_size().
Furthermore there is a stale definition in common/utils.h which is using
the old "struct btrfs_root" as the first argument, while we have already
migrated to "struct btrfs_fs_info".
So just unexport csum_tree_block() and remove the stale definition.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The raw number of the features in the list of 'mkfs.btrfs -O list-all'
and for -R is not that useful, it's an implementation detail or can be
put to documentation.
Now looks like:
Filesystem features available:
mixed-bg - mixed data and metadata block groups (compat=2.6.37, safe=2.6.37)
extref - increased hardlink limit per file to 65536 (compat=3.7, safe=3.12, default=3.12)
raid56 - raid56 extended format (compat=3.9)
...
Signed-off-by: David Sterba <dsterba@suse.com>
Block group tree feature is completely a standalone feature, and it has
been over 5 years before the initial introduction to solve the long
mount time.
I don't really want to waste another 5 years waiting for a feature which
may or may not work, but definitely not properly reviewed for its
preparation patches.
So this patch will separate the block group tree feature into a
standalone compat RO feature.
There is a catch, in mkfs create_block_group_tree(), current
tree-checker only accepts block group item with valid chunk_objectid,
but the existing code from extent-tree-v2 didn't properly initialize it.
This patch will also fix above mentioned problem so kernel can mount it
correctly.
Now mkfs/fsck should be able to handle the fs with block group tree.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This file includes linux/fs.h which includes linux/mount.h and with
glibc 2.36 linux/mount.h and glibc mount.h are not compatible [1]
therefore try to avoid including both headers
[1] https://sourceware.org/glibc/wiki/Release/2.36
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The initial proposal for file attributes was built on simply doing
SETFLAGS but this builds on an old and non-extensible interface that has
no direct mapping for all inode flags. There's a unified interface
fileattr that covers file attributes and xflags, it should be possible
to add new bits.
On the protocol level the value is copied as-is in the original inode
but this does not provide enough information how to apply the bits on
the receiving side. Eg. IMMUTABLE flag prevents any changes to the file
and has to be handled manually.
The receiving side does not apply the bits yet, only parses it from the
stream.
Signed-off-by: David Sterba <dsterba@suse.com>
Add constant for initial value to avoid unexpected clashes with user
defined getopt values and shift the common size getopt values.
Signed-off-by: David Sterba <dsterba@suse.com>
In send stream v2, send can emit a command for setting inode flags via
the setflags ioctl. Pass the flags attribute through to the ioctl call
in receive.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Send stream v2 can emit fallocate commands, so receive must support them
as well. The implementation simply passes along the arguments to the
syscall. Note that mode is encoded as a u32 in send stream but fallocate
takes an int, so there is a unsigned->signed conversion there.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new btrfs_send_op and support for both dumping and proper receive
processing which does actual encoded writes.
Encoded writes are only allowed on a file descriptor opened with an
extra flag that allows encoded writes, so we also add support for this
flag when opening or reusing a file for writing.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The new format privileges the BTRFS_SEND_A_DATA attribute by
guaranteeing it will always be the last attribute in any command that
needs it, and by implicitly encoding the data length as the difference
between the total command length in the command header and the sizes of
the rest of the attributes (and of course the tlv_type identifying the
DATA attribute). To parse the new stream, we must read the tlv_type and
if it is not DATA, we proceed normally, but if it is DATA, we don't
parse a tlv_len but simply compute the length.
In addition, we add some bounds checking when parsing each chunk of
data, as well as for the tlv_len itself.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
In send stream v2, write commands can now be an arbitrary size. For that
reason, we can no longer allocate a fixed array in sctx for read_cmd.
Instead, read_cmd dynamically allocates sctx->read_buf. To avoid
needless reallocations, we reuse read_buf between read_cmd calls by also
keeping track of the size of the allocated buffer in sctx->read_buf_sz.
We do the first allocation of the old default size at the start of
processing the stream, and we only reallocate if we encounter a command
that needs a larger buffer.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
An encoded extent can be up to 128K in length, which exceeds the largest
value expressible by the current send stream format's 16 bit tlv_len
field. Since encoded writes cannot be split into multiple writes by
btrfs send, the send stream format must change to accommodate encoded
writes.
Supporting this changed format requires retooling how we store the
commands we have processed. We currently store pointers to the struct
btrfs_tlv_headers in the command buffer. This is not sufficient to
represent the new BTRFS_SEND_A_DATA format. Instead, parse the attribute
headers and store them in a new struct btrfs_send_attribute which has a
32bit length field. This is transparent to users of the various TLV_GET
macros.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Headers that are only exported and not used for build do not need the
BTRFS_FLAT_INCLUDES switch (between local and installed headers). Now
that there are local copies of the shared headers drop the respective
part from local headers.
Signed-off-by: David Sterba <dsterba@suse.com>
Kernel commit efc0e69c2fea ("btrfs: introduce exclusive operation
BALANCE_PAUSED state") allows to start a device add when there's a
paused balance, eg. to let the balance finish when there's not enough
chunk space. Add the support for that, though this needs an updated
kernel to export the 'balance paused' in sysfs.
Signed-off-by: David Sterba <dsterba@suse.com>
We need to make sure we process the block group root, and mark its
blocks as used for the free space tree checking.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fuzz-test/003 was infinite looping when I reworked the code to
re-calculate the used bytes for the superblock. This is because fsck
wasn't properly fixing the bad extent before my change, it just happened
to error out nicely, whereas my change made it so we go the wrong bytes
used count and just infinite looped trying to fix the problem.
Fix this by sanity checking the extent when we try to re-calculate the
bytes_used. This makes us no longer infinite loop so we can get through
the fuzz tests.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to enable developers to test the extent tree v2 features as they
are added, add the ability to mkfs an extent tree v2 fs if we have
experimental enabled.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We could have multiple extent roots, so add a helper to mark all the
used space in the FS based on any extent roots we find, and then use
this extent io tree to fixup the block group accounting.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we switch to multiple global trees we'll need to access the
appropriate extent root depending on the block group or possibly root.
To handle this, use a helper in most places and then the actual root in
places where it is required. We will whittle down the direct accessors
with future patches, but this does the bulk of the preparatory work.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_mark_used_tree_blocks skips the reloc roots for some reason, which
causes problems because these blocks are in use, and we use this helper
to determine if the block accounting is correct with extent tree v2.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is going to be used for the extent tree v2 stuff more commonly, so
move it out so that it is accessible from everywhere that we need it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this helper sitting in extent-tree.c, but it's a repair
function. I'm going to need to make changes to this for extent-tree-v2
and would rather this live outside of the code we need to share with the
kernel.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
mkfs.btrfs v5.15 outputs a message even if the disk is a HDD without
TRIM/DISCARD support:
Performing full device TRIM /dev/sdc2 (326.03GiB) ...
[CAUSE]
mkfs.btrfs check TRIM/DISCARD support through the content of
queue/discard_granularity, but compare it against a wrong value.
When HDD without TRIM/DISCARD support, the content of
queue/discard_granularity is '0' '\n' '\0', rather than '0' '\0'.
[FIX]
- compare the value based on atoi() to provide more robustness
- delete unnecessary '\n' in pr_verbose()
Fixes: c50c448518 ("btrfs-progs: do sysfs detection of device discard capability")
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a lot of call sites where we use the following code snippet:
u8 super_block_data[BTRFS_SUPER_INFO_SIZE];
struct btrfs_super_block *sb;
u64 ret;
sb = (struct btrfs_super_block *)super_block_data;
The reason for this is, structure btrfs_super_block was smaller than
BTRFS_SUPER_INFO_SIZE.
Thus for anything with csum involved, we have to use a proper 4K buffer.
Since the recent unification of sizeof(struct btrfs_super_block), we no
longer need such workaround, and can use struct btrfs_super_block
directly to do any operation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Since commit dad03fac3b ("btrfs-progs: switch btrfs_group_profile_str
to use raid table"), fstests/btrfs/023 and btrfs/151 will always fail.
The failure of btrfs/151 explains the reason pretty well:
btrfs/151 1s ... - output mismatch
--- tests/btrfs/151.out 2019-10-22 15:18:14.068965341 +0800
+++ ~/xfstests-dev/results//btrfs/151.out.bad 2021-11-02 17:13:43.879999994 +0800
@@ -1,2 +1,2 @@
QA output created by 151
-Data, RAID1
+Data, raid1
...
(Run 'diff -u ~/xfstests-dev/tests/btrfs/151.out ~/xfstests-dev/results//btrfs/151.out.bad' to see the entire diff)
[CAUSE]
Commit dad03fac3b ("btrfs-progs: switch btrfs_group_profile_str to use
raid table") will use btrfs_raid_array[index].raid_name, which is all
lower case.
[FIX]
There is no need to bring such output format change.
So here we split the btrfs_raid_attr::raid_name[] into upper_name[] and
lower_name[], and make upper and lower case helpers for callers to use.
Now there are several types of callers referring to lower_name and
upper_name:
- parse_bg_profile()
It uses strcasecmp(), either case would be fine.
- btrfs_group_profile_str()
Originally it uses upper case for all profiles except "single".
Now unified to upper case.
- sprint_profiles()
It uses lower case.
- bg_flags_to_str()
It uses upper case.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit ("btrfs-progs: switch btrfs_group_profile_str to use raid table")
introduced a regression that raid profile of GlobalReserve will be
printed as 'unknown'.
$ btrfs filesystem df /mnt/test
Data, single: total=5.02TiB, used=4.98TiB
System, single: total=4.00MiB, used=624.00KiB
Metadata, single: total=11.01GiB, used=6.94GiB
GlobalReserve, unknown: total=512.00MiB, used=0.00B
Fix it by:
- take BTRFS_BLOCK_GROUP_RESERVED into account when masking the block
group flags
- update the define of BTRFS_BLOCK_GROUP_RESERVED too so it's same as in
kernel
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Kernel emits inode number for all mkfile/mkdir/... commands but the
receive part does not pass it to the callbacks. At least document that
and read it from the stream in case we'd like to use it in the future.
Signed-off-by: David Sterba <dsterba@suse.com>
Use the raid table helper to avoid hard coding profiles for the given
number of devices in test_num_disk_vs_raid.
Signed-off-by: David Sterba <dsterba@suse.com>
Another duplication of the raid table, in this case missing the changes
to raid10 and raid0 minimum devices changed in a177ef7dd4
("btrfs-progs: mkfs: allow degenerate raid0/raid10").
Define and use a helper using the table value.
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pread with btrfs_pread as well.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pwrite with btrfs_pwrite(). It simply calls pwrite() on non-zoned
btrfs (opened without O_DIRECT). On zoned mode (opened with O_DIRECT),
it allocates an aligned bounce buffer, copies the contents and uses it
for direct-IO writing.
Writes in device_zero_blocks() and btrfs_wipe_existing_sb() are a little
tricky. We don't have fs_info on our hands, so use zinfo to determine it
is a zoned device or not.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we cannot create ext*/reiserfs on a zoned device, it is useless to
allow ZONED feature when converting a file system. Drop ZONED flag from
BTRFS_CONVERT_ALLOWED_FEATURES.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
