The most common sector sizes are 4k, 16k and 64k, we don't really need
to test that with convert, this takes a long time for little benefit as
the node size is only for metadata, while the rest remains the same.
Signed-off-by: David Sterba <dsterba@suse.com>
The ntfs2btrfs tool recently found a bug in 'check', add the conversion
test support to our testsuite. It's optional and depends on kernel
support of the 'ntfs3' driver and the availability of mkntfs and
ntfs2btrfs, which might not be available everywhere.
Signed-off-by: David Sterba <dsterba@suse.com>
Fix failures caused by the lack of ACL support in btrfs. For example:
$ make test
::
[TEST/misc] 057-btrfstune-free-space-tree
failed: setfacl -m u:root:x /Volumes/ws/btrfs-progs/tests/mnt/acls/acls.1
test failed for case 057-btrfstune-free-space-tree
make: *** [Makefile:493: test-misc] Error 1
Similar failures occurred in the test cases convert/001-ext2-basic,
convert/003-ext4-basic, convert/005-delete-all-rollback, and
convert/006-large-hole-extent.
Resolve it by adding a check for ACL support using the
check_kernel_support_acl() helper function. It gracefully handles the case
when ACL support is not compiled by calling _not_run().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new test case would create an empty ext4 with 64K block size, which
can lead to a new data chunk which is no longer 1:1 mapped.
Then convert the fs and verify it with --check-data-csum to make sure
the image file is fine.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Executing the script inside the directories as './test.sh' is not
supposed to work but could happen accidentally. With an exit after
attempting to source the we can fix that.
Signed-off-by: David Sterba <dsterba@suse.com>
We've changed mkfs defaults in 5.15 so it's not necessary to test the
features separately with convert. Instead use only defaults and add
other features that can be selected independently.
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The test case convert/022 will fail if the system doesn't have
reiserfs support nor reiserfs user space tools:
# make TEST=022\* test-convert
[TEST] convert-tests.sh
WARNING: reiserfs filesystem not listed in /proc/filesystems, some tests might be skipped
[TEST/conv] 022-reiserfs-parent-ref
Failed system wide prerequisities: mkreiserfs
test failed for case 022-reiserfs-parent-ref
make: *** [Makefile:443: test-convert] Error 1
[CAUSE]
Unlike other test cases, convert/022 doesn't even check if we have
kernel support for it.
[FIX]
Add the proper check before doing system wide prerequisities checks.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Creating a simple directory structure leads to the following error:
$ btrfs check
Checking filesystem on test.img
UUID: 8f2292ad-c80e-4ab4-8a72-29aa3a83002c
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
unresolved ref dir 260 index 0 namelen 2 name .. filetype 0 errors 3, no dir item, no dir index
ERROR: errors found in fs roots
found 101085184 bytes used, error(s) found
total csum bytes: 98460
total tree bytes: 262144
total fs tree bytes: 49152
total extent tree bytes: 16384
btree space waste bytes: 151864
file data blocks allocated: 167931904
referenced 167931904
The self-reference should exist for the toplevel directory, where the
parent directory points to itself.
Issue: #453
Author: tyan0
Signed-off-by: David Sterba <dsterba@suse.com>
The ext3 has been superseded by ext4, we don't need to test it
separately so this reduces the convert tests run time.
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers to create temporary files, this save some typing and
we'll have a bit more consistent naming.
Signed-off-by: David Sterba <dsterba@suse.com>
The file names are build from roughly these components:
- btrfs-progs as prefix
- category (mkfs, convert) or what's the type of the file like 'image'
- the substitution template, XXXXXX
Signed-off-by: David Sterba <dsterba@suse.com>
Relax the condition about a unique uuid for convert, only print a
warning. In case we copy the uuid, it's expected that at the time the
conversion starts the uuid is not unique as it sill exists on the source
filesystem.
In case user sets the uuid manually but it's still the same one as on
the source filesystem we should also allow that, so it warns in this
case as well.
Update the test so it creates a block device where the uuid would be
also cached by blkid and lets the non-unique check succeed.
Issue: #404
Signed-off-by: David Sterba <dsterba@suse.com>
To properly check the 64bit timestamp conversion, the filesystem must
support it. Check that a freshly created filesystem contains the
feature.
Signed-off-by: David Sterba <dsterba@suse.com>
Image of ext4 with needs_recovery incompat bit set. This bit cannot be
set by regular tune2fs so was created on an empty 4M image by patched
tune2fs that set the bit unconditionally (the image still passed e2fsck,
with journal recovery).
Issue: #348
Signed-off-by: David Sterba <dsterba@suse.com>
The new test case will test whether btrfs-convert can handle 64G ext*
fs.
This exercise the cctx->total_bytes calculation where multiplying 4K
(unsigned int) and 16777216 (u32) could lead to bit overflow for
unsigned int and got 0, and screw up later free space calculation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a test case to check if the converted fs has device extent beyond
boundary.
The disk layout of source ext4 fs needs some extents to make them
allocated at the very end of the fs. The script is from the original
reporter.
Also, since the existing convert tests always uses 512M as device size,
which is not suitable for this test case, make it to grab the existing
device size to co-operate with this test case.
Reported-by: Jiachen YANG <farseerfc@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The shell keyword function is not necessary and not used in many tests,
remove it from the few places that use it right now.
Signed-off-by: David Sterba <dsterba@suse.com>
Use TEST_TOP as base for tests to reference any files, this will be used
for git and external testsuite.
INTERNAL_BIN is needed for referencing binaries that could reside in
different paths in git vs external testsuite.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
[ add quotes around sourced files, update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The post-rollback helper still assumes just extN, we need an extra
argument that'll get passed to fsck. Change all callsites at once so the
tests do not fail temporarily.
Signed-off-by: David Sterba <dsterba@suse.com>
Many of the test cases for convert apply regardless of what the source
file system is and using ext4 is sufficient. I've included several
test cases that are reiserfs-specific.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ patch split from the previous one, minor cleanups in common.convert ]
Signed-off-by: David Sterba <dsterba@suse.com>
The dd in convert-tests/008-readonly-image is expected to fail, so
there being a typo in the file name has gone unnoticed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We'll enforce the btrfs type for mount everwhere so we must provide a
way to mount converted filesystems. Add a new helper that will try to
mount the given type.
Signed-off-by: David Sterba <dsterba@suse.com>
We'll use mount -t $fstype later on, extend the API so we don't have to
parse the type from other parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
Separate checksum test from convert_test_post_check and use it to fix
the broken test 005 as reported.
References: https://bugzilla.kernel.org/show_bug.cgi?id=177141
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new test case to check if btrfs-convert copies common inode flags
like append(a), immutable(i).
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ minor fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Old convert codes uses both 0400 permission and INODE_READONLY flag to
make the converted ext2 image readonly.
While new convert treat the inode just as normal inode, with no special
inode flag and uses 0600 permission.
This makes user able to modify converted image unintentionally and make
rollback fails.
This test case will test the regression.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For ext* fs containing a large hole(larger than 128M), btrfs-convert
will only insert one 128M hole extent and skip the remaining.
This leads to discontinuous file extents.
Add test case for it, and since it's a pinpoint regression test case, no
combination of convert options nor checksum verification.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extN filesystem type was lost when the separate tests were created
and we've been testing only ext2. The tests pass for ext3 and ext4
though.
Signed-off-by: David Sterba <dsterba@suse.com>
We really use root only for mount/umount and access to the ext2_saved
image (that has 0600). Also switch to common variable so we can use
helpers.
Signed-off-by: David Sterba <dsterba@suse.com>
New convert introduced simpler chunk/extent allocation algorithm, at the
cost of complex backup superblock migration codes.
Use specially built ext2 images to test if btrfs-convert can convert and
rollback images without problem.
All these special ext2 image have blocks/holes across 2nd btrfs backup
superblock.
The naming of test image is like the following:
|<------superblock migration range----->|
64M 64M + 64K
|-Data--|-Data--|/Hole//|-Data--|/Hole//|-Data--|--Data--| = drdhdhdrd
These test cases should check all typical layouts and make sure new
convert works.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
