There's a lot of code under BTRFS_COMPAT_SEND_NO_UUID_TREE to support
kernels < 3.12 that don't have uuid tree and the subvolume uuids are
searched in a slow way, building the uuid tree on the userspace side.
As the uuid tree is always created, the fallback code was not exercised
anyway due to 'uuid_tree_existed' check in subvol_uuid_search2.
Delete the code from the internal copy of send-utils. The support still
stays for libbtrfs and will be removed in the future.
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_list_* functions come with some overhead and for simple path
resolution we can use btrfs_subvolid_resolve.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to include this besides btrfs-list.c itself and
subvolume.c that does use the btrfs_list_* API.
Signed-off-by: David Sterba <dsterba@suse.com>
The separate file was needed for libbtrfs in the past to avoid pulling
utils.c in, but this is not needed after recent cleanups.
Signed-off-by: David Sterba <dsterba@suse.com>
The free space tree is a better way to track the free space and has been
tested in the wild for a long time. The backward compatibility is
sufficient, several long term kernels. On-line conversion from v1 to v2
can be done by mount, switching from v2 to v1 can be done by 'btrfs
check'.
Issue: #295
Signed-off-by: David Sterba <dsterba@suse.com>
The no-holes feature reduces consumption of metadata by not representing
file holes. Reducing metadata is a good thing in general, this is the
main goal to enable this by default.
There's a drawback, related to the missing information about holes. The
'check' tool cannot use it to cross-reference extent information and in
some cases may not be able to detect a problem.
The no-hole feature can be also enabled by 'btrfstune -n' on an
unmounted filesystem.
Issue: #405
Signed-off-by: David Sterba <dsterba@suse.com>
The term 'path' is confusing as we normally use it for filesystem paths,
while for multipath it's more related to the physical path by which the
devices are connected (though it also shows up as another path in the
filesystem).
Rename the helper doing the multipath detection so it's clear what path
is meant by that.
Signed-off-by: David Sterba <dsterba@suse.com>
Since libudev doesn't provide a static version of the library for static
build btrfs-progs will have to provide manual fallback. This change does
this by parsing the udev database files hosted at /run/udev/data/.
Under that directory every block device should have a file with the
following name: bMAJ:MIN. So implement the bare minimum code necessary
to parse this file and search for the presence of DM_MULTIPATH_DEVICE_PATH
udev attribute. This could likely be racy since access to the udev
database is done outside of libudev but that's the best that can be
done when implementing this manually and is only for a limited usecase
where static build has to be used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs-progs will happily enumerate any device which has a
btrfs filesystem on it irrespective of its type. For the majority of
use cases that's fine and there haven't been any problems with that.
However, there was a recent report that in multipath scenario when
running "btrfs fi show" after a path flap (path going down and then
coming back up) instead of the multipath device being show the device
which represents the flapped path is shown. So a multipath filesystem
might look like:
Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba
Total devices 1 FS bytes used 192.00KiB
devid 1 size 10.00GiB used 536.00MiB path /dev/mapper/3600140501cc1f49e5364f0093869c763
/dev/mapper/xxx is actually backed by an arbitrary number of paths,
which in turn are presented to the system as ordinary SCSI devices i.e
/dev/sdX. If a path flaps and a user re-runs 'btrfs fi show' the output
would look like:
Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba
Total devices 1 FS bytes used 192.00KiB
devid 1 size 10.00GiB used 536.00MiB path /dev/sdd
This only occurs on unmounted filesystems as those are enumerated by
btrfs-progs, for mounted filesystem the kernel properly deals only with
the actual multipath device.
Turns out the output of this command is consumed by libraries and the
presence of a path device rather than the actual multipath causes
issues.
Fix this by checking for the presence of DM_MULTIPATH_DEVICE_PATH
udev attribute as multipath path devices are tagged with this attribute
by the multipath udev scripts.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The detection of the discard status of a device is done by issuing a
real discard request but on an empty range. This works in most cases.
However there's a case of a VirtualBox driver that returns 'Operation
not supported' in that case, and then discard is skipped during mkfs.
The other tools like fstrim check the sysfs queue file
discard_granularity which is the recommended way. Do that as well.
Issue: #390
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot zone reset a regular file with emulated zones. So, mkfs.btrfs
on such a file causes the following error.
ERROR: zoned: failed to reset device '/home/naota/tmp/btrfs.img' zones: Inappropriate ioctl for device
Introduce btrfs_zoned_device_info->emulated to distinguish the zones are
emulated or not. And, use it to decide it needs zone reset or not.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reading partition size using an ioctl requires the device open, but that
does not work for unprivileged users. This leads to 0 size in device
info structures filled by device_get_partition_size.
As a consequence, this also misreports such devices as missing in 'fi
us' overview:
$ btrfs fi us /
WARNING: cannot read detailed chunk info, per-device usage will not be shown, run as root
Overall:
Device size: 411.35GiB
Device allocated: 53.01GiB
Device unallocated: 358.34GiB
Device missing: 411.35GiB
Used: 31.99GiB
Free (estimated): 379.16GiB (min: 379.16GiB)
Free (statfs, df): 379.35GiB
Data ratio: 1.00
Metadata ratio: 1.00
Global reserve: 194.77MiB (used: 0.00B)
Multiple profiles: no
There should be 0 for 'Device missing'.
Add a fallback to read the device size from sysfs in case the ioctl is
not available.
Issue: #395
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_list_get_path_rootid is exported to libbtrfs so it
needs to stay, but we can inline the implementation.
Signed-off-by: David Sterba <dsterba@suse.com>
The header contains the protocol definitions and is almost exactly the
same as the kernel version, move it to the proper directory.
Signed-off-by: David Sterba <dsterba@suse.com>
The helper open codes what we already have in the raid attr table, so
use it. We assume a valid flags so there's no error value.
Signed-off-by: David Sterba <dsterba@suse.com>
We'll use plain qgroupid parsing function elsewhere so split that part
from parse_qgroupid_or_path. The parsing is slightly reworked and goes
from start to end, while previously it looked up the slash and worked
from there. In case a valid qgroupid is also a valid path, the path must
be specified as absolute.
Signed-off-by: David Sterba <dsterba@suse.com>
This helper can parse a qgroupid or a path, so rename it accordingly, so
a plain qgroupid parsing can be factored out as a standalone helper.
Signed-off-by: David Sterba <dsterba@suse.com>
Add the GPL v2 header to files where it was missing and is not from an
external source, update to the most recent version with the address.
Signed-off-by: David Sterba <dsterba@suse.com>
There are some duplicate parsers of the profile names, factor out the
one from balance to the common code.
Signed-off-by: David Sterba <dsterba@suse.com>
There are various parsing helpers scattered everywhere, unify them to
one file and start with helpers already in utils.c.
Signed-off-by: David Sterba <dsterba@suse.com>
Kernel patch b2f78e88052bc0bee ("btrfs: allow degenerate raid0/raid10")
in
5.15 will allow mounting and converting to single device raid0 or two
device raid10. Let mkfs create such filesystem.
"The motivation is to allow to preserve the profile type as long as it
possible for some intermediate state (device removal, conversion), or
when there are disks of different size, with raid0 the otherwise
unusable space of the last device will be used too. Similarly for
raid10, though the two largest devices would need to be the same."
Signed-off-by: David Sterba <dsterba@suse.com>
- Change it void
The old one always return csum_size.
- Use snprintf()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_format_csum() is a special helper only used in
btrfs-progs.
Move it to common/utils.[ch] other than leaving it in
kernel-shared/disk-io.c.
Since we're moving the code, also introduce a macro,
BTRFS_CSUM_STRING_LEN, to replace open-coded string length calculation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
check_running_fs_exclop() can return 1 when exclop is changed to "none"
The ret is set by the return value of the select() operation. Checking
the exclusive op changes just the exclop variable while ret is still
set to 1.
Set ret = 0 if exclop is set to BTRFS_EXCL_NONE or BTRFS_EXCL_UNKNOWN.
Remove unnecessary continue statement at the end of the block.
The command appears to have executed, but does not. This was found when
balance which typically reports chunks relocated did not print anything
on screen.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sysfs hides the zone size of a block device in the queue/chunk_sectors
file, so add a helper that will read it for us when given the short
device name (that can be found in FSID/devices).
Signed-off-by: David Sterba <dsterba@suse.com>
There are several directories in /sys/fs/btrfs/FSID that contain more
than one file/directory. Add a helper to open the directory so that the
file descriptor can be used for fdopendir.
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 8ef9313cf2 ("btrfs-progs: zoned: implement log-structured
superblock") changed to write BTRFS_SUPER_INFO_SIZE bytes to device.
The before num of bytes to be written is sectorsize.
It causes mkfs.btrfs failed on my 16k pagesize kvm:
$ /usr/bin/mkfs.btrfs -s 16k -f -mraid0 /dev/vdb2 /dev/vdb3
btrfs-progs v5.12
See http://btrfs.wiki.kernel.org for more information.
ERROR: superblock magic doesn't match
ERROR: superblock magic doesn't match
common/device-scan.c:195: btrfs_add_to_fsid: BUG_ON `ret != sectorsize`
triggered, value 1
/usr/bin/mkfs.btrfs(btrfs_add_to_fsid+0x274)[0xaaab4fe8a5fc]
/usr/bin/mkfs.btrfs(main+0x1188)[0xaaab4fe4dc8c]
/usr/lib/libc.so.6(__libc_start_main+0xe8)[0xffff7223c538]
/usr/bin/mkfs.btrfs(+0xc558)[0xaaab4fe4c558]
[1] 225842 abort (core dumped) /usr/bin/mkfs.btrfs -s 16k -f -mraid0
/dev/vdb2 /dev/vdb3
btrfs_add_to_fsid() now always calls sbwrite() to write
BTRFS_SUPER_INFO_SIZE bytes to device, so change condition of
the BUG_ON().
Also add comments for sbread() and sbwrite().
Signed-off-by: Su Yue <l@damenly.su>
Signed-off-by: David Sterba <dsterba@suse.com>
Compiling with clang produces warnings like:
common/utils.c:1670:31: warning: use of GNU 'missing =' extension in designator [-Wgnu-designator]
[BTRFS_EXCLOP_SWAP_ACTIVATE] "swap activate",
^
=
Use the form with '=' to fix the warning.
Signed-off-by: David Sterba <dsterba@suse.com>
Getting the per bg type zone unusable space will be used in other size
reports like 'fi us', so export it to the device utils.
Signed-off-by: David Sterba <dsterba@suse.com>
Move the file to common as it's used by several parts, while still
keeping the name 'repair' although the only thing it does is adding a
corrupted extent.
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of functions that are related to opening filesystem in
various modes, this can be moved to a separate file.
Signed-off-by: David Sterba <dsterba@suse.com>
Decrease dependency on system headers, remove where they're not needed
or became stale after code moved. The path-utils.h encapsulate path
operations so include linux/limits.h here, that's where PATH_MAX is
defined.
Signed-off-by: David Sterba <dsterba@suse.com>
The helper wraps a raw ioctl but some users may already have the fd and
not necessarily the path. Add a suitable helper for convenience.
Signed-off-by: David Sterba <dsterba@suse.com>
This helper hasn't been used since 63bbf2931d ("btrfs-progs: rework
calculations of fi usage") a few years ago and we don't need the statfs
based calculations anywhere.
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot overwrite superblock magic in a sequential required zone.
Instead, we can reset the zone to wipe it.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we zero out a region in a sequential write required zone, we cannot
write to the region until we reset the zone. Thus, we must prohibit zeroing
out to a sequential write required zone.
zero_dev_clamped() is modified to take the zone information and it calls
zero_zone_blocks() if the device is host managed to avoid writing to
sequential write required zones.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All zones of zoned block devices should be reset before writing. Support
this by introducing PREP_DEVICE_ZONED.
btrfs_reset_all_zones() walk all the zones on a device, and reset a zone if
it is sequential required zone, or discard the zone range otherwise.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Superblock (and its copies) is the only data structure in btrfs which has a
fixed location on a device. Since we cannot overwrite in a sequential write
required zone, we cannot place superblock in the zone. One easy solution
is limiting superblock and copies to be placed only in conventional zones.
However, this method has two downsides: one is reduced number of superblock
copies. The location of the second copy of superblock is 256GB, which is in
a sequential write required zone on typical devices in the market today.
So, the number of superblock and copies is limited to be two. Second
downside is that we cannot support devices which have no conventional zones
at all.
To solve these two problems, we employ superblock log writing. It uses two
adjacent zones as a circular buffer to write updated superblocks. Once the
first zone is filled up, start writing into the second one. Then, when
both zones are filled up and before starting to write to the first zone
again, reset the first zone.
We can determine the position of the latest superblock by reading write
pointer information from a device. One corner case is when both zones are
full. For this situation, we read out the last superblock of each zone, and
compare them to determine which zone is older.
The following zones are reserved as the circular buffer on ZONED btrfs.
- primary superblock: offset 0B (and the following zone)
- first copy: offset 512G (and the following zone)
- Second copy: offset 4T (4096G, and the following zone)
If these reserved zones are conventional, superblock is written fixed at
the start of the zone without logging.
Currently, superblock reading/writing is done by pread/pwrite. This
commit replace the call sites with sbread/sbwrite to wrap the functions.
For zoned btrfs, btrfs_sb_io which is called from sbread/sbwrite
reverses the IO position back to a mirror number, maps the mirror number
into the superblock logging position, and do the IO.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Get the zone information (number of zones and zone size) from all the
devices, if the volume contains a zoned block device. To avoid costly
run-time zone report commands to test the device zones type during block
allocation, it also records all the zone status (zone type, write
pointer position, etc.).
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the zoned feature enabled, a zoned block device-aware btrfs
allocates block groups aligned to the device zones and always written in
sequential zones at the zone write pointer position.
It also supports "emulated" zoned mode on a non-zoned device. In the
emulated mode, btrfs emulates conventional zones by slicing the device
into fixed-size zones.
We don't support conversion from the ext4 volume with the zoned feature
because we can't be sure all the converted block groups are aligned to
zone boundaries.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Likewise in the kernel code, provide fs_info access from struct
btrfs_device. This will help to unify the code between the kernel and
the userland.
Since fs_info can be NULL at the time of btrfs_add_to_fsid(), let's use
btrfs_open_devices() to set fs_info to the devices.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce the queue_param helper function to get a device request queue
parameter. This helper will be used later to query information of a zoned
device.
Furthermore, rewrite is_ssd() using the helper function.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[Naohiro] fixed error return value
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently mkfs.btrfs will output a warning message if the sectorsize is
not the same as page size:
WARNING: the filesystem may not be mountable, sectorsize 4096 doesn't match page size 65536
But since btrfs subpage support for 64K page size is coming, this output
is populating the golden output of fstests, causing tons of false
alerts.
This patch will teach mkfs.btrfs to check
/sys/fs/btrfs/features/supported_sectorsizes and check if the sector
size is supported.
Then only output above warning message if the sector size is not
supported or the file is not found (ie. kernel does not export the file
yet).
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Line continuations and not simple "\n" for the json output, this got
inherited to the plain text output, but this is not necessary.
This also caused problems in fstests btrfs/006 where the extra newline
does not match the golden output and the test fails, when printing
device stats that now use the output formatter.
Change the plain text formatting to always expect that a fmt_print or a
manual line print (like is for the device stats) will append the newline
and remove it from the end of formatting.
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H4b7QhL02aSOpN0-k_9P2EAbj1t+NkA6VwidKEg4S996w@mail.gmail.com
Reported-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current mount detection code in btrfs receive is not quite perfect.
For example, suppose /tmp is mounted as a tmpfs. In that case,
btrfs receive /tmp2 will find /tmp as the longest mount that matches a
prefix of /tmp2 and blow up because it is not a btrfs filesystem, even
if /tmp2 is just a directory in / mounted as btrfs.
Fix this by replacing the substring check with a dirname recursion to
only check the directories in the path of the dir, rather than every
substring.
Add a new test for this case.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_open_dir already has a check whether the passed path is a
directory and if so it returns a specific error code (-3) when such an
error occurs. Use this instead of open-coding the directory check. To
avoid regression in cli/003 test also move directory checks before fs
type in btrfs_open.
Output before this check:
ERROR: resize works on mounted filesystems and accepts only
directories as argument. Passing file containing a btrfs image
would resize the underlying filesystem instead of the image.
After:
ERROR: not a directory: /root/btrfs-progs/tests/test.img
ERROR: resize works on mounted filesystems and accepts only
directories as argument. Passing file containing a btrfs image
would resize the underlying filesystem instead of the image.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Partial revert of 922eaa7b54 ("btrfs-progs: build: fix linking with
static libmount"), remove the necessary workarounds like the weak
symbols and link time warnings. Symbols renamed not to clash with
libmount (parse_size, canonicalize_path) haven't been reverted because
the new names are acceptable.
Signed-off-by: David Sterba <dsterba@suse.com>
In commit 57cfe29e69 ("btrfs-progs: utils: introduce
find_mount_fsroot") the entries in /proc/self/mountinfo are parsed by a
convenience library libmount, because getmntent does not provide the
information we need to distinguish bind mounts.
Using libmount turned out to be problematic in several ways:
- static build got broken due to clashing symbols, eg. for parsing size
or path canonicalization (#333)
- long-term distros do not have libmount new enough (2.24+) to provide
some functions (mnt_table_is_empty, #334)
- libmount internally uses getgrnam_r/mnt_get_uid/... that are not
static-build friendly, a warning is printed during link time for each
binary; we don't use any of the functions
- libmount has further library dependencies that we don't need:
$ ldd /usr/lib64/libmount.so.1
linux-vdso.so.1 (0x00007fff4f175000)
libc.so.6 => /lib64/libc.so.6 (0x00007f44a1763000)
libblkid.so.1 => /usr/lib64/libblkid.so.1 (0x00007f44a1730000)
libselinux.so.1 => /usr/lib64/libselinux.so.1 (0x00007f44a1704000)
/lib64/ld-linux-x86-64.so.2 (0x00007f44a1998000)
libpcre.so.1 => /usr/lib64/libpcre.so.1 (0x00007f44a166c000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007f44a1666000)
namely selinux, pcre and dl.
Summing it up, libmount causes more trouble than it's worth using a
convenience library, we want to keep the dependencies minimal so the
custom mountinfo parser was inevitable.
Issue: #333
Issue: #334
Issue: #336
Signed-off-by: David Sterba <dsterba@suse.com>
The libmount dependency has been added in commit 61ecaff036
("btrfs-progs: build: add libmount dependency"), and static build got
broken. There are functions that do basically the same thing and also
share the name, which in turn fails at link time.
ld: /../lib64/libmount.a(libcommon_la-canonicalize.o): in function `canonicalize_dm_name':
util-linux-2.34/lib/canonicalize.c:58: multiple definition of `canonicalize_dm_name';
common/path-utils.static.o:btrfs-progs/common/path-utils.c:286: first defined here
In case the collision can be resolved by renaming, it's done
(canonicalize_path and parse_size). There are 2 symbols from selinux
that are substituted by a weak aliases during the static build.
There's one new warning due to use of getgrnam_r in libmount that
depends on dynamic linking and may not work properly with static build.
We're not using the related functions directly or indirectly, so it
should be safe to ignore the warnings.
ld: ../lib64/libmount.a(la-utils.o): in function `mnt_get_gid':
util-linux-2.34/libmount/src/utils.c:625: warning: Using 'getgrnam_r' in statically linked applications
+requires at runtime the shared libraries from the glibc version used for linking
Issue: #333
Signed-off-by: David Sterba <dsterba@suse.com>
To use optimized CRC implementation, the input buffer must be
unsigned long aligned. btrfs receive calculates checksum based on
read_buf, including btrfs_cmd_header (with zeroed CRC field)
and command content.
Reorder the buffer to the beginning of the structure and force the
alignment to 64, this should be cacheline friendly and could speed up
the data transfers.
Interesting parts from the report:
Sending host:
Fedora 33
AMD ThreadRipper 1920X - 128GB RAM
2x10GBit Ethernet, bonded
MegaRaid 9270
6x16TB Seagate Exos in RAID5
Receiving host:
Fedora 33
Intel i3-7300 - HT enabled - 32GB RAM
10GBit Ethernet, single connection
MegaRaid 9260
12x8TB WD NAS drives in RAID5
The 2 hosts are connected to the same 10G switch. The sender could definitely
saturate a 10GBit link. The practically achievable writes on the backup host
would be lower, but still at least 400MB/s. The file system contains mostly
large files of 1GB+, so there is little meta-data.
With btrfs send/receive I'm getting a steady transfer rate of 60MB/s. The copy
has been running for a little over 5 days now, having only transferred some
25TB. This is way too slow for this setup.
Analyzing resource usage, the sender side is fine, both the btrfs send and the
corresponding ssh process only use about 10-10% CPU, which on a 24 threaded
machine is virtually nothing. However, the receiver is running with a load of
~2.6, with the sshd using 30-50% CPU and the btrfs receive a further 60-70%.
The rest of the load comes from IO wait. So the bottleneck is the btrfs receive
clearly.
Issue: #324
Signed-off-by: Sheng Mao <shngmao@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new function checks for filesystem path name that was mounted, thus
being different from find_mount_root. By using libmount we can easily
parse /proc/self/mountinfo file and check for the pathname field.
The function is useful to filter bind mounts with content different from
the original mount, thus making it safe to assume that the reported path
can be accessed by the user, with the right content.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In cases where the compiler does not initialize the formatter context to
all zeros, there could be garbage values left on the depth 0 that is not
explicitly initialized. This could lead to mistakenly printing a ","
separator before the last closing "}", like
{
"__header": {
"version": "1"
},
}
Signed-off-by: David Sterba <dsterba@suse.com>
Extends fmt_print_start_group() so it can handle when name argument is
NULL. It is useful for printing unnamed array or map.
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The exclusive ops will not start if there's one already running. Now
that we have the sysfs export (since kernel 5.10) to check if there's
one already running, use it to allow enqueueing of the operations as a
convenience.
Supported enqueuing:
btrfs balance start --enqueue
btrfs filesystem resize --enqueue
btrfs device add --enqueue
btrfs device delete --enqueue
btrfs replace start --enqueue
This patch implements the functionality based on Goldwyn's patch
https://lore.kernel.org/linux-btrfs/?q=20200825150338.32610-4-rgoldwyn%40suse.de
but on top of previous preparatory patches.
Note that 'filesystem resize' options could confuse getopt as the
negative size change looks like a series of short options and there's no
way to make getopt ignore the short options, so there's a custom option
parser.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several problems for current sectorsize check:
- No check at all for sectorsize
This means you can even specify "-s 62k".
- No way to specify sectorsize smaller than page size
Fix all these problems by:
- Introduce btrfs_check_sectorsize()
To do:
* power of 2 check for sectorsize
* lower and upper boundary check for sectorsize
* warn about sectorsize mismatch with page size
- Remove the max() between page size and sectorsize
This allows us to override the sectorsize for 64K page systems.
- Make nodesize calculation based on sectorsize
No need to use page size any more.
Users who specify sectorsize manually really know what they are doing,
and we have warned them already.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add helper that will either check a running operation or wait until it's
done, so that commands can be started and enqueued. If there are more
enqueued, an attempt to avoid racing is done based on the remaining
waiting time of each command.
Signed-off-by: David Sterba <dsterba@suse.com>
Since kernel 5.10, the file /sys/fs/btrfs/FSID/exclusive_operation
exports textual id of the running exclusive operation (balance, device
add/remove, ...). Add definitions and parsing functions so they can be
used to check before another operation is started and potentially
blocks.
Signed-off-by: David Sterba <dsterba@suse.com>
Add helpers to open and read sysfs files from the per-fs directory.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The path-util.[ch] is the right place, keep the send-utils.h prototypes
as it's part of libbtrfs headers.
Signed-off-by: David Sterba <dsterba@suse.com>
Add a function get_fsid_fd() to use an open file fd to get the
fsid of the mounted filesystem.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a runtime feature (-R) flag for the free space tree. A filesystem
that is mkfs'd with -R free-space-tree then mounted with no options has
the same contents as one mkfs'd without the option, then mounted with
'-o space_cache=v2'.
The only tricky thing is in exactly how to call the tree creation code.
Using btrfs_create_free_space_tree as is did not quite work, because an
extra reference to the eb (root->commit_root) is leaked, which mkfs
complains about with a warning. I opted to follow how the uuid tree is
created by adding it to the dirty roots list for cleanup by
commit_tree_roots in commit_transaction. As a result,
btrfs_create_free_space_tree no longer exactly matches the version in
the kernel sources.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
[WARNING]
When compiling btrfs-progs, the following warning pops up:
In file included from /usr/include/stdio.h:867,
from ./kerncompat.h:22,
from common/fsfeatures.c:17:
In function 'printf',
inlined from 'process_features' at common/fsfeatures.c:192:4,
inlined from 'btrfs_process_runtime_features' at common/fsfeatures.c:205:2:
/usr/include/bits/stdio2.h:107:10: warning: '%s' directive argument is null [-Wformat-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This only occur with default make parameters. If compiling with D=1, the
warning just disappears.
The involved tool chain is:
- GCC 10.1.0
[CAUSE]
The offending code is:
static void process_features(u64 flags, enum feature_source source)
{
...
if (flags & feat->flag) {
printf("Turning ON incompat feature '%s': %s\n",
feat->name, feat->desc);
}
...
}
Currently, there is no runtime/fs feature without a name nor
description. So we shouldn't hit a feature with NULL as name nor
description.
This looks like a bug in GCC though.
[WORKAROUND]
However can workaround it by doing an explicit check on feat->name and
feat->desc to teach GCC not to do a wrong warning.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For backward compatibility with tools that may rely on the messages we
need a special level to print the message unless the verbosity settings
haven't been set on command line.
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_scan_devices() is being used by commands such as
'btrfs filesystem' and 'btrfs device', by having the verbose argument in
the btrfs_scan_devices() we can control which threads to print the
messages when verbose is enabled by the global option.
Add an option %verbose to btrfs_scan_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add --verbose and --quiet command options to show verbose or no output
from the subcommands. By introducing global a bconf::verbose memeber to
propagate the same down to the subcommand.
Further the added helper function pr_verbose() helps to logs the verbose
messages, based on the state of the %bconf::verbose. And further HELPINFO_
defines are provided for the usage.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As of now the define HELPINFO_INSERT_GLOBALS if used as in the example
as below (as of now its not been used anywhere) will print the help
texts as shown below
$ ./btrfs fi show --help
<snip>
Global options:
--format TYPE where TYPE is: text
So in preparation to add --verbose and --quiet global options, and
apparently --format is not being used yet, this patch splits the global
options into two defines.
"Global options:"
So that the currently added global options --verbose and --quiet can use
the define HELPINFO_INSERT_GLOBALS header as shown below.
$ ./btrfs fi show --help
<snip>
Global options:
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add support for enabling quotas at mkfs time. The qgroup accounting will
be consistent, ie. works with --rootdir.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make the features structures more generic to allow mkfs-time and
mount-time sets to be defined.
This provides base for later mkfs support of mount-time features like
quotas.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update the summary of 'fi usage' where the multiple profiles will be
listed by type, like:
Multiple profiles: yes (data, metadata)
The string is returned from btrfs_test_for_multiple_profiles so the
callers don't have to assemble it together from the other profile
strings.
Signed-off-by: David Sterba <dsterba@suse.com>
The warning header was printed always, even if there weren't multiple
block group profiles. This also fixes the mixed block group profile
detection.
Signed-off-by: David Sterba <dsterba@suse.com>
Use simpler output format for easier parsing and place each block group
type on a separate line.
Example output:
WARNING: Multiple block group profiles detected, see 'man btrfs(5)'.
WARNING: Data: single, raid1
Signed-off-by: David Sterba <dsterba@suse.com>
Move 'single' as the first in the list of the multiple block groups, as
it's the default block group and the simplest.
Example output:
WARNING: data -> [single, raid1], metadata -> [single], system -> [single]
WARNING: data+metadata -> [single], system -> [raid1]
Signed-off-by: David Sterba <dsterba@suse.com>
Simpify sprint_profiles so it does not take the output parameters
optionally and add stubs to btrfs_test_for_multiple_profiles_by_fd.
This allows to remove all conditionals and reduce parameters of
sprint_profiles so that the output is returned directly.
Signed-off-by: David Sterba <dsterba@suse.com>
The term 'mixed' is confusing as it's commonly used for mised block
group profiles created by 'mkfs.btrfs --mixed'. We're interested in
multiple profiles for each type, so use the term 'multiple'.
Signed-off-by: David Sterba <dsterba@suse.com>
Add code to show a warning if a mixed profiles filesystem is detected.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: David Sterba <dsterba@suse.com>
When compiling with clang, this warning is shown:
common/utils.c:404:3: warning: declaration does not declare anything [-Wmissing-declarations]
__attribute__ ((fallthrough));
This attribute seems to silence the same warning in GCC. Changing this
attribute with /* fallthrough */ fixes the warning for both gcc and
clang.
Full support for the attribute will be in clang 10, gcc supports that
now. Let's use what works for both and switch to the attribute in the
future.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the introduction of xxhash64 to btrfs-progs we created a crypto/
directory for all the hashes used in btrfs (although no
cryptographically secure hash is there yet).
Move the crc32c implementation from kernel-lib/ to crypto/ as well so we
have all hashes consolidated.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Discovered with cppcheck. Fix signed/unsigned int mismatches, sizeof and
long formats.
Pull-request: #197
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The argument isn't changed inside the function.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ split from the original patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's theoretically possible to add multiple devices with sizes that add up
to or exceed 16EiB. A file system will be created successfully but will
have a superblock with incorrect values for total_bytes and other fields.
Kernels up to v5.0 will crash when they encounter this scenario.
We need to check for overflow and reject the device if it would overflow.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1099147
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At least in Debian, default build flags include -Werror=format-security,
for good reasons in most cases. Here, the string comes from strftime --
and though I don't suspect any locale would be crazy enough to have %X
include a '%' char, the compiler has no way to know that.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: David Sterba <dsterba@suse.com>
Build several standalone tools into one binary and switch the function
by name (symlink or hardlink).
* btrfs
* mkfs.btrfs
* btrfs-image
* btrfs-convert
* btrfstune
The static target is also supported. The name of resulting boxed
binaries is btrfs.box and btrfs.box.static . All the binaries can be
built at the same time without prior configuration.
text data bss dec hex filename
822454 27000 19724 869178 d433a btrfs
927314 28816 20812 976942 ee82e btrfs.box
2067745 58004 44736 2170485 211e75 btrfs.static
2627198 61724 83800 2772722 2a4ef2 btrfs.box.static
File sizes:
857496 btrfs
968536 btrfs.box
2141400 btrfs.static
2704472 btrfs.box.static
Standalone utilities:
512504 btrfs-convert
495960 btrfs-image
471224 btrfstune
491864 mkfs.btrfs
1747720 btrfs-convert.static
1411416 btrfs-image.static
1304256 btrfstune.static
1361696 mkfs.btrfs.static
So the shared 900K binary saves ~2M, or ~5.7M for static build.
Signed-off-by: David Sterba <dsterba@suse.cz>
Add structures and API for unified output definition and multiple
formatting backends. Currently there's plain text and json.
The format of each row is defined in struct rowspec, selected using a
key and formatted according to the type. There are extended types for
eg. UUID or pretty size, while direct printf format specifiers work too.
Due to different nature of the outputs, the context structure members
are not always used.
* text output mostly uses indentation and formats the name to a given
width
* json output tracks nesting depth and keeps stack of previous groups
(list or array) and how many member have been printed, as the
separators are allowed only between values and must not preced the
group closing bracket
the nesting depth is hardcoded to 16, counting the global group
The API provides functions to print simple values and some helpers to
format more complex structures.
Signed-off-by: David Sterba <dsterba@suse.com>
Global options should be printed right after the command options, but
there could be text following the options. Add a marker that will allow
to order the options before that text.
Signed-off-by: David Sterba <dsterba@suse.com>
This adds a global --format option to request extended output formats
from each command.
We currently only support text mode. Command help reports what
output formats are available for each command. Global help reports
what valid formats are.
If an invalid format is requested, an error is reported and lists the
valid formats.
Each command sets a bitmask that describes which formats it is capable
of outputting. If a globally valid format is requested of a command
that doesn't support it, an error is reported and command usage dumped.
Commands don't need to specify that they support text output. All
commands are required to output text.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ use global config instead of passing cmd_context ]
Signed-off-by: David Sterba <dsterba@suse.com>
Create directory for all sources that can be used by anything that's not
rellated to a relevant kernel part, all common functions, helpers,
utilities that do not fit any other specific category.
The traditional location would be probably lib/ with all things that are
statically linked to the main binaries, but we have libbtrfs and
libbtrfsutil so this would be confusing.
Signed-off-by: David Sterba <dsterba@suse.com>
