There are now two tests with 060, we'd like to be that a unique number,
rename the one that was added more recently.
Signed-off-by: David Sterba <dsterba@suse.com>
The raid-stripe-tree can be enabled for convert, though it's still
considered incomplete and slightly experimental. Due to that the tests
need to be adjusted to check for support and skip mount eventually.
Possible remaining options to add: quota, squota
Issue: #694
Signed-off-by: David Sterba <dsterba@suse.com>
Enhance the conversion macro to recognize the filesystem type in case
the ntfs-specific converter utility has to be used. Its current feature
set does not match btrfs-convert.
Signed-off-by: David Sterba <dsterba@suse.com>
The test does not pass in environments where /bin/sh is not bash (like
github CI). Unify the initial setup like the other tests do: source,
compatibility, prerequisities, the rest.
Signed-off-by: David Sterba <dsterba@suse.com>
The strict check is enabled for both check_image() and
convert_test_do_convert() to detect chunk alignment related problems.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The test case would check if "btrfs subvolume create":
- Report error on an existing path
- Still report error if mulitple paths are given and one of them already
exists
- For above case, still created a subvolume for the good parameter
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we're already directing the end user to use "btrfs rescue
clear-ino-cache" command, there is not much need to support it in
btrfs-check.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
https://www.openssl.org/ Is a well known cryptography library and since
freshly released version 3.2 it also supports variable digest size of
blake2b, so we can now add it among the crypto providers.
Configure with --with-crypto=openssl.
Signed-off-by: David Sterba <dsterba@suse.com>
https://botan.randombit.net/ Botan is a cryptography library with C
bindings and provides what we need (sha256 and blake2b), among many
others. Add it to the list of crypto backends if somebody wants to use
it.
Currently the version 2.19 is the latest one. Botan3 3.2.0 exists but
does not seem to be widely available in distros yet.
Configure with --with-crypto=botan.
Signed-off-by: David Sterba <dsterba@suse.com>
The test case would verify the following behaviors:
- Partial failure
Should return 1, but the remaining valid destinations would still be
created.
- All success
That's as usual.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the kernel commit 070bb0011ccf ("btrfs: sysfs: show if ACL
support has been compiled in") we can now check if ACL is compiled
without requiring a btrfs device. Retain older method for older
kernels.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The zone size may not be parsed correctly in 'nullb create' due to
copy&paste error from the 'size'. This is already fixed upstream.
Signed-off-by: David Sterba <dsterba@suse.com>
Since a few days the CI started to fail randomly when there were loop
devices used in the tests. The mount fails because some device is
reported to be missing:
$ losetup --show --find
/dev/loop3
...
$ mkfs ...
ERROR: device scan failed on '/dev/loop3': No such file or directory
...
$ mount
mount: /home/runner/work/btrfs-progs/btrfs-progs/tests/mnt: wrong fs
type, bad option, bad superblock on /dev/loop3, missing codepage or
helper program, or other error.
$ dmesg
...
BTRFS error (device loop0): devid 3 uuid 11d9c345-9527-433e-a024-7102659fa0ee is missing
BTRFS error (device loop0): failed to read the system array: -2
BTRFS error (device loop0): open_ctree failed
This was reproducible in the "cli" tests, but also happened on a local
machine.
To fix that wait for all loop devices before mount, the command
'btrfs device ready' should block until that. The convenience helper
does that, for any standalone 'mount' used with loop devices this must
be done manually.
Signed-off-by: David Sterba <dsterba@suse.com>
The test names 011 and 012 are the same but 012 is actually testing
recursion of the 'btrfs fi du' command.
Signed-off-by: David Sterba <dsterba@suse.com>
There was a support for a short syntax of 'btrfs balance' that accepted
a path where normally would be the mandatory subcommand. This was a
heuristic and nowadays everybody should be using the
'btrfs balance action' syntax. The warning was in place for a year, it's
time to remove the short syntax completely.
Issue: #517
Signed-off-by: David Sterba <dsterba@suse.com>
The most common sector sizes are 4k, 16k and 64k, we don't really need
to test that with convert, this takes a long time for little benefit as
the node size is only for metadata, while the rest remains the same.
Signed-off-by: David Sterba <dsterba@suse.com>
The ntfs2btrfs tool recently found a bug in 'check', add the conversion
test support to our testsuite. It's optional and depends on kernel
support of the 'ntfs3' driver and the availability of mkntfs and
ntfs2btrfs, which might not be available everywhere.
Signed-off-by: David Sterba <dsterba@suse.com>
Minor refactoring, check arguments and print parameters. This can be
used to stress btree allocation by changing run_size.
Signed-off-by: David Sterba <dsterba@suse.com>
There's an old test for btree code that could be used in the testsuite.
Still needs some polishing and review what tests make sense.
Signed-off-by: David Sterba <dsterba@suse.com>
Previously the XFS-specific code was commented out so we don't need the
headers for building fsstress, this changes how the utility behaves
compared to the one in fstests, e.g. randomness or additional open/close
operations. Add enough code from xfsprogs to make it compile and enable
the #if0-ed code.
Signed-off-by: David Sterba <dsterba@suse.com>
Issue #622 reported a case where ntfs2btrfs can generate out-of-order
inline backref items, which can lead to kernel transaction abort, but
not detected by btrfs-check.
This patch would add such image, whose extent tree looks like this for
the only data extent:
item 0 key (13631488 EXTENT_ITEM 4096) itemoff 16172 itemsize 111
refs 3 gen 7 flags DATA
(178 0xdfb591fa80d95ea) extent data backref root FS_TREE objectid 257 offset 0 count 1
(178 0xdfb591fbbf5f519) extent data backref root FS_TREE objectid 258 offset 0 count 1
(178 0xdfb591f49f9f8e7) extent data backref root FS_TREE objectid 259 offset 0 count 1
While the original good base image has the following backrefs for the
same data extent:
item 0 key (13631488 EXTENT_ITEM 4096) itemoff 16172 itemsize 111
refs 3 gen 7 flags DATA
(178 0xdfb591fbbf5f519) extent data backref root FS_TREE objectid 258 offset 0 count 1
(178 0xdfb591fa80d95ea) extent data backref root FS_TREE objectid 257 offset 0 count 1
(178 0xdfb591f49f9f8e7) extent data backref root FS_TREE objectid 259 offset 0 count 1
Notice the sequence (the 2nd number in the round brackets) should be
descending. (Meanwhile type should be ascending, but it's way harder to
create.)
For now we don't have a way to fix it, but at least we should detect it.
Issue: #622
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new test case would:
- Prepare two loopback devices
One is for storing the source directory (on a btrfs).
This is to ensure we can set xattr for the directory, as filesystems
like tmpfs (mostly utilized by mktemp) is not supporting xattr.
The other one is the real target fs where we call
"mkfs.btrfs --rootdir" on.
- Create the source directory with the following contents:
* rootdir inode attributs:
# mode (750)
# uid (1000)
# gid (1000)
# xattr (user.rootdir)
* one regular file, with attributes:
# xattr (user.foorbar)
- Execute "mkfs.btrfs --rootdir" and mount the new fs
- Verify the above attributes
The target fs should have the same attributes, especially for the
rootdir inode.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The convert tests take a long time and are not necessary for quick test
rounds under the convenience target 'make test'. We still run the tests
in CI.
Signed-off-by: David Sterba <dsterba@suse.com>
Create subvolumes and delete every N-th to generate output where we can
also see how the stale qgroups are placed (at the end).
Issue: #687
Signed-off-by: David Sterba <dsterba@suse.com>
This partially reverts commit 2726a83952,
the part where the test runner scripts call the log scanning. There are
still unfixed extent buffer leak reported by fuzz tests. Disable it
temporarily so CI can pass and do other pre-release checks. Scanning
will be enabled after release again.
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel patch, ("btrfs: reject device with CHANGING_FSID_V2 flag"),
removes kernel support for the CHANGING_FSID_V2 flag. So, drop its
related testcase.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The misc-test/034-metadata_uuid test case, has four sets of disk images
to simulate failed writes during btrfstune -m|M operations. As of now,
this tests kernel only. Update the test case to verify btrfstune -m|M's
functionality to recover from the same scenarios.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some errors may be reported in the logs only, scan the file each time
there are fresh results. The scanning script will return error that is
supposed to be caught by the testsuite environment.
Signed-off-by: David Sterba <dsterba@suse.com>
Scanning all results is meant for the whole testsuite, we'd like to make
it more fine grained to verify them once a test is run via the test
running wrappers.
Signed-off-by: David Sterba <dsterba@suse.com>
The test markers have changed in 4.17 so the result scanner does not
print the test names (but still detects the errors).
Signed-off-by: David Sterba <dsterba@suse.com>
Add appropriate prefix to the error messages to make it easier to track
down which case failed.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
