Even with "mkfs.btrfs -b", mkfs.btrfs resets all the zones on the device.
Limit the reset target within the specified length.
Also, we need to check that there is no active zone outside of the FS
range. Having an active zone outside FS reduces the number of zones btrfs
can write simultaneously. Technically, we can still scan all the device
zones and keep active zones outside FS intact and try to live with the
limited active zones. But, that will make btrfs operations harder.
It is generally bad idea to use "-b" on a non-test usage on a device with
active zone limit in the first place. You really need to take care that FS
and outside the FS goes over the limit. That means you'll never be able to
use zones outside the FS anyway.
So, until there is a strong request for that, I don't think it's worthwhile
to do so.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces a new parser helper, parse_u64_with_suffix(),
which has a better error handling, following all the parse_*()
helpers to return non-zero value for errors.
This new helper is going to replace parse_size_from_string(), which
would directly call exit(1) to stop the whole program.
Furthermore most callers of parse_size_from_string() are expecting
exit(1) for error, so that they can skip the error handling.
For those call sites, introduce a wrapper, arg_strtou64_with_suffix(),
to do that. The only disadvantage is a little less detailed error
report for why the parse failed, but for most cases the generic error
string should be enough.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In experimental build, read global '--param zone-size=SIZE' and use it
as emulated zone size. This is for testing only, will be promoted to a
proper option in the future.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, write_dev_supers() compares the superblock location vs the size
of the device to check if it can write the superblock. This is not correct
for a zoned device, whose superblock location is different than a regular
device.
Introduce check_sb_location() to check if the superblock zone exists for
the zoned case.
Running btrfs check can fail on a certain zoned device setup (e.g,
zone size = 128MB, device size = 16GB).
From generic/330:
yes | btrfs check --repair --force /dev/nullb1
[1/7] checking root items
Fixed 0 roots.
[2/7] checking extents
ERROR: zoned: failed to read zone info of 4096 and 4097: Invalid argument
ERROR: failed to write super block for devid 1: write error: Input/output error
failed to write new super block err -5
failed to repair damaged filesystem, aborting
This happens because write_dev_supers() is comparing the original
superblock location vs the device size to check if it can write out a
superblock copy or not.
For the above example, since the first copy location (64MB) < device size
(16GB), it tries to write out the copy. But, the copy must be written into
zone 4096 (512G / zone size (128M) = 4096), which is out of the device.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce sb_bytenr_to_sb_zone(), which converts the original superblock
location to the zone number of superblock log writing.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel patches for RST and squota are queued for 6.7, we need to be
able to test the features so it's not necessary to hide the mkfs support
under experimental build. The kernel may still need debug build to
enable mount.
Signed-off-by: David Sterba <dsterba@suse.com>
Allow for RAID levels 0, 1 and 10 on zoned devices if the RAID stripe tree
is used.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fixes involve the following changes:
- Unexport functions which are not utilized out of the file
* print_path_column()
* parse_reflink_range()
* btrfs_list_setup_print_column()
* device_get_partition_size_sysfs()
* max_zone_append_size()
- Include related headers before implementing the function
* change-uuid.c
* convert-bgt.c
* seed.h
- Add missing headers caused by the above header changes
* include <uuid/uuid.h> for tune/tune.h.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is introduced by commit b031fe84fd ("btrfs-progs: zoned:
implement zoned chunk allocator") but it never got called since then.
Furthermore in the kernel zoned code, there is no such function from the
very beginning, and everything is handled by
btrfs_find_allocatable_zones().
Thus we can safely remove the function.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The *64 interfaces, such as fstat64, off64_t, etc, are legacy interfaces
created at a time when 64-bit file support was still new. They are
generally exposed when defining a macro named _LARGEFILE64_SOURCE, as
e.g. the glibc docs[0] say.
The modern way to utilise largefile support, is to continue to use the
regular interfaces (off_t, fstat, ..), and define _FILE_OFFSET_BITS=64.
We already use the autoconf macro AC_SYS_LARGEFILE[1] which arranges this
and sets this macro for us. Therefore, we can utilise the non-64 names
without fear of breaking on 32-bit systems.
This fixes the build against musl libc, ever since musl dropped the
*64 compat from interfaces by default[2] just for _GNU_SOURCE, unless
_LARGEFILE64_SOURCE is defined. However, there are plans for a future
removal of the whole *64 header API, and that workaround (adding another
define) might cease to exist.
So, rename all *64 API use to the regular non-suffixed names. For
consistency, rename the internal functions that were *64 named
(lstat64_path, ..) too.
This should have no regressions on any platform.
[0]: https://www.gnu.org/software/libc/manual/html_node/Feature-Test-Macros.html#index-_005fLARGEFILE64_005fSOURCE
[1]: https://www.gnu.org/software/autoconf/manual/autoconf-2.67/html_node/System-Services.html
[2]: 25e6fee27f
Pull-request: #615
Signed-off-by: psykose <alice@ayaya.dev>
Signed-off-by: David Sterba <dsterba@suse.com>
[WARNING]
Clang 15.0.7 warns about several unused variables:
kernel-shared/zoned.c:829:6: warning: variable 'num_sequential' set but not used [-Wunused-but-set-variable]
u32 num_sequential = 0, num_conventional = 0;
^
cmds/scrub.c:1174:6: warning: variable 'n_skip' set but not used [-Wunused-but-set-variable]
int n_skip = 0;
^
mkfs/main.c:493:6: warning: variable 'total_block_count' set but not used [-Wunused-but-set-variable]
u64 total_block_count = 0;
^
image/main.c:2246:6: warning: variable 'bytenr' set but not used [-Wunused-but-set-variable]
u64 bytenr = 0;
^
[CAUSE]
Most of them are just straightforward set but not used variables.
The only exception is total_block_count, which has commented out code
relying on it.
[FIX]
Just remove those variables, and for @total_block_count, also remove the
comments.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of helpers to read device size, the btrfs_device_size
should be one of them. Rename it and so minor cleanup.
Signed-off-by: David Sterba <dsterba@suse.com>
As we're not supporting arbitrarily big or small zone sizes in the kernel,
reject devices that don't fit in progs as well.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move sb_zone_number() and related constants from zoned.c to the
corresponding header for later use.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Support using BTRFS_BLOCK_GROUP_DUP on metadata (and system) block groups.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have two places checking if a block-group profile is
supported on a zoned device, one in mkfs/main.c and one in
kernel-shared/zoned.c.
Use the one from kernel-shared/zoned.c in mkfs as well, unifying all
checks.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we switch to multiple global trees we'll need to access the
appropriate extent root depending on the block group or possibly root.
To handle this, use a helper in most places and then the actual root in
places where it is required. We will whittle down the direct accessors
with future patches, but this does the bulk of the preparatory work.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The enumeration could get out of date, like fixed in previous commit.
Create a helper that will hide the implementation details.
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pread with btrfs_pread as well.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pwrite with btrfs_pwrite(). It simply calls pwrite() on non-zoned
btrfs (opened without O_DIRECT). On zoned mode (opened with O_DIRECT),
it allocates an aligned bounce buffer, copies the contents and uses it
for direct-IO writing.
Writes in device_zero_blocks() and btrfs_wipe_existing_sb() are a little
tricky. We don't have fs_info on our hands, so use zinfo to determine it
is a zoned device or not.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
device_get_partition_size_fd() fails if we pass a regular file. This can
happen when trying to create an emulated zoned filesystem on a regular file.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The enumeration of profiles not available for zoned mode in
btrfs_load_block_group_zone_info was lacking the 3 and 4 copy raid1, add
them.
Signed-off-by: David Sterba <dsterba@suse.com>
max_zone_append_size is unused and can as well be removed just like we
did on the kernel side.
Keep one sanity check though, so we're not adding devices to a zoned FS
that aren't supporting zone append.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot zone reset a regular file with emulated zones. So, mkfs.btrfs
on such a file causes the following error.
ERROR: zoned: failed to reset device '/home/naota/tmp/btrfs.img' zones: Inappropriate ioctl for device
Introduce btrfs_zoned_device_info->emulated to distinguish the zones are
emulated or not. And, use it to decide it needs zone reset or not.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A combination of new progs and old kernel may lead to problems with
detecting zone size by ioctl. Fixed by #376 but still incomplete because
old kernels may return EINVAL for unsupported ioctl. This should be
ENOTTY but hasn't been like that until kernel 5.11.
As we always pass valid arguments to the ioctl we can't conflate the two
and can EINVAL the same way as ENOTTY.
Issue: #399
Signed-off-by: David Sterba <dsterba@suse.com>
Add the GPL v2 header to files where it was missing and is not from an
external source, update to the most recent version with the address.
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_sb_io(), blk_zone_report is used for getting information about
zones. But it is not freed if code goes in usual path. This patch frees
the variable just after it used.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a report that a system with 4.19 kernel fails boot because
device scan exits with error. This is because zoned support is compiled
in btrfs-progs but not in kernel.
To make new progs and old kernels work, do a fallback when the zoned
ioctl is not available, as if it were a non-zoned device. There is no
other option, but this is safe at least for the device scan that would
not error out. Any unaligned writes to a zoned device will fail as
expected.
Issue: #376
Signed-off-by: David Sterba <dsterba@suse.com>
Decrease dependency on system headers, remove where they're not needed
or became stale after code moved. The path-utils.h encapsulate path
operations so include linux/limits.h here, that's where PATH_MAX is
defined.
Signed-off-by: David Sterba <dsterba@suse.com>
The newly added zoned mode constants can utilize the const ilog2
version. Copy it from kernel include/linux/log2.h.
Signed-off-by: David Sterba <dsterba@suse.com>
mkfs.btrfs uses a temporary superblock during the initialization process.
The temporary superblock uses BTRFS_MAGIC_TEMPORARY as its magic which is
different from a regular superblock. As a result, libblkid, which only
supports the usual magic, cannot recognize the volume as btrfs. So, let's
wipe the temporary magic before writing out the usual superblock.
Technically, we can add the temporary magic to the libblkid's table. But,
it will result in recognizing a half-baked filesystem as btrfs, which is
not ideal.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we zero out a region in a sequential write required zone, we cannot
write to the region until we reset the zone. Thus, we must prohibit zeroing
out to a sequential write required zone.
zero_dev_clamped() is modified to take the zone information and it calls
zero_zone_blocks() if the device is host managed to avoid writing to
sequential write required zones.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All zones of zoned block devices should be reset before writing. Support
this by introducing PREP_DEVICE_ZONED.
btrfs_reset_all_zones() walk all the zones on a device, and reset a zone if
it is sequential required zone, or discard the zone range otherwise.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When freeing a chunk, we can/should reset the underlying device zones
for the chunk. Introduce btrfs_reset_chunk_zones() and reset the zones.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tree manipulating operations like merging nodes often release
once-allocated tree nodes. Btrfs cleans such nodes so that pages in the
node are not uselessly written out. On ZONED drives, however, such
optimization blocks the following IOs as the cancellation of the write
out of the freed blocks breaks the sequential write sequence expected by
the device.
Check if next dirty extent buffer is continuous to a previously written
one. If not, it redirty extent buffers between the previous one and the
next one, so that all dirty buffers are written sequentially.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Conventional zones do not have a write pointer, so we cannot use it to
determine the allocation offset for sequential allocation if a block
group contains a conventional zone.
But instead, we can consider the end of the highest addressed extent in
the block group for the allocation offset.
For new block group, we cannot calculate the allocation offset by
consulting the extent tree, because it can cause deadlock by taking
extent buffer lock after chunk mutex, which is already taken in
btrfs_make_block_group(). Since it is a new block group anyways, we can
simply set the allocation offset to 0.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A zoned filesystem must allocate blocks at the zones' write pointer. The
device's write pointer position can be mapped to a logical address
within a block group. To facilitate this, add an "alloc_offset" to the
block group to track the logical addresses of the write pointer.
This logical address is populated in btrfs_load_block_group_zone_info()
from the write pointers of corresponding zones.
For now, zoned filesystems the single profile. Supporting non-single
profile with zone append writing is not trivial. For example, in the DUP
profile, we send a zone append writing IO to two zones on a device. The
device reply with written LBAs for the IOs. If the offsets of the
returned addresses from the beginning of the zone are different, then it
results in different logical addresses.
We need fine-grained logical to physical mapping to support such
separated physical address issue. Since it should require additional
metadata type, disable non-single profiles for now.
This commit supports the case all the zones in a block group are
sequential. The next patch will handle the case having a conventional
zone.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement a zoned chunk and device extent allocator. One device zone
becomes a device extent so that a zone reset affects only this device
extent and does not change the state of blocks in the neighbor device
extents.
To implement the allocator, we need to extend the following functions for
a zoned filesystem:
- init_alloc_chunk_ctl
- dev_extent_search_start
- dev_extent_hole_check
- decide_stripe_size
Here, dev_extent_hole_check() is newly introduced to check the validity of
a hole found.
init_alloc_chunk_ctl_zoned() is mostly the same as regular one. It always
set the stripe_size to the zone size and aligns the parameters to the zone
size.
dev_extent_search_start() only aligns the start offset to zone boundaries.
We don't care about the first 1MB like in regular filesystem because we
anyway reserve the first two zones for superblock logging.
dev_extent_hole_check_zoned() checks if zones in given hole are either
conventional or empty sequential zones. Also, it skips zones reserved for
superblock logging.
With the change to the hole, the new hole may now contain pending extents.
So, in this case, loop again to check that.
Finally, decide_stripe_size_zoned() should shrink the number of devices
instead of stripe size because we need to honor stripe_size == zone_size.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Superblock (and its copies) is the only data structure in btrfs which has a
fixed location on a device. Since we cannot overwrite in a sequential write
required zone, we cannot place superblock in the zone. One easy solution
is limiting superblock and copies to be placed only in conventional zones.
However, this method has two downsides: one is reduced number of superblock
copies. The location of the second copy of superblock is 256GB, which is in
a sequential write required zone on typical devices in the market today.
So, the number of superblock and copies is limited to be two. Second
downside is that we cannot support devices which have no conventional zones
at all.
To solve these two problems, we employ superblock log writing. It uses two
adjacent zones as a circular buffer to write updated superblocks. Once the
first zone is filled up, start writing into the second one. Then, when
both zones are filled up and before starting to write to the first zone
again, reset the first zone.
We can determine the position of the latest superblock by reading write
pointer information from a device. One corner case is when both zones are
full. For this situation, we read out the last superblock of each zone, and
compare them to determine which zone is older.
The following zones are reserved as the circular buffer on ZONED btrfs.
- primary superblock: offset 0B (and the following zone)
- first copy: offset 512G (and the following zone)
- Second copy: offset 4T (4096G, and the following zone)
If these reserved zones are conventional, superblock is written fixed at
the start of the zone without logging.
Currently, superblock reading/writing is done by pread/pwrite. This
commit replace the call sites with sbread/sbwrite to wrap the functions.
For zoned btrfs, btrfs_sb_io which is called from sbread/sbwrite
reverses the IO position back to a mirror number, maps the mirror number
into the superblock logging position, and do the IO.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Run a zoned filesystem on non-zoned devices. This is done by "slicing
up" the block device into fixed-sized chunks and emulate a conventional
zone on each of them. The emulated zone size is determined from the size
of device extent.
This is mainly aimed at testing of zoned filesystems, i.e. the zoned
chunk allocator, on regular block devices.
Currently, we always use EMULATED_ZONE_SIZE (256MiB) for the emulated
zone size. In the future, this will be customized by mkfs option.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Placing both data and metadata in a block group is impossible in ZONED
mode. For data, we can allocate a space for it and write it immediately
after the allocation. For metadata, however, we cannot do that, because the
logical addresses are recorded in other metadata buffers to build up the
trees. As a result, a data buffer can be placed after a metadata buffer,
which is not written yet. Writing out the data buffer will break the
sequential write rule.
Check and disallow MIXED_BG with ZONED mode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
